Tender For supply of 6400 mm curved switches with 60 e1a1 thick web tongue rails for 1in 8.5 turnout bg (1673 mm) for 60e1 rail with r260 grade on psc sleepers as per rdso drawing no. t-9775 with alteration 3 in accordance with rdso's standard drawing no.t-9774 alteration 2 and conforming to irs specification no. irs:t-10-2025 & irs:t - 62 -2025 (complete set) with latest revision/corrigendum/amendment complete with all parts listed in the sub assembly rdso drawing no. t-9775 but excluding standard fish plates, fish bolts, elastic rail clips, insulating liners/metal liners as amended up-to date of closing of e- tender. rails needed for fabrication purpose for tongue rails, stock rails and check rails will be arranged by supplier at his own cost in terms of railway board's letter no. 2022/track-1(p)/fabricators dt. 24.01.2022. list of fittings attached as annexure-c [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : supply of 6400 mm curved switch with 60e1a1 thick web tongue rail and 60 kg. 60 e1 r260 grade stock rail for 1 in 8.5, bg 60 kg. turnout on psc sleeper to rdso drawing no. t-9775 alt. 2 or latest alt if any with elastic fasteners and spring operated setting device (rdso- t - 6216 with latest alteration), confirming to irs specification no. t - 10 - 2025, irs t- 12 - 2009 for flat bottom rails and irs t- 62 - 2025 for end forging of thick web asymmetrical rails, including nylon cord reinforced grsp with confirming to irs specification t- 55 - 2025 (rev. 1) or latest if any and supply of all components/fittings listed as per annexure-a and excluding elastic rail clips, insulating liner, plate screw & single coil spring washer etc. (the alt. in drawings & specification issued by rdso upto 10 days prior on tender opening date shall be applicable in this tender ) firm to note : nylon cord reinforced grsp should only be purchased from rdso-approved sources through process inspection. (i) note: - the responsibility to procure rails will solely lie with the manufacturer (bid including rail cost / per set) in termsof railway board letter no. 2022 / track-i(p)/fabricators dt. 24.01.2022 (ii) the unique code shall be provided by the firm by punching / embossing on each set of tws, so that it can be correlated with the type of set- i.e., the type of flexure and the specified limit of degree of flexure suitable for left-hand or right-hand application. (iii) firm to supply 10 % additional fittings with each set as per note-26 of rdso drg. t-9775 alt. 2 of list ' a '. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : supply of 10125 mm curved switch with 60 e1 a1 thick web tongue rail and 60 kg. 60e1 r260 grade stock rail for 1 in 12, bg 60 kg. turnout on psc sleeper to rdso drawing no. t-8780 alt. 4 or latest alt if any with elastic fasteners and spring operated setting device (rdso-t-6216 with latest alteration), confirming to irs specification no. t- 10- 2025, irs t-12-2009 for flat bottom rails and irs t- 62- 2025 for end forging of thick web asymmetrical rails, including nylon cord reinforced grsp with confirming to irs specification t- 55- 2025 (rev. 1) or latest if any and supply of all components/fittings listed as per annexure-a and excluding elastic rail clips, insulating liner, plate screw & singlecoil spring washer etc. ( the alt. in drawings & specification issued by rdso upto 10 days prior on tender opening date shall be applicable in this tender ) firm to note : nylon cord reinforced grsp should only be purchased from rdso-approved sources through process inspection. note: -(i) the responsibility to procure rails will solely lie with the manufacturer (bid including rail cost / per set) in terms ofrailway board letter no. 2022/ track-i(p) / fabricators dt. 24.01.2022 (ii) the unique code shall be provided by the firm by punching/embossing on each set of tws , so that it can be correlated with the type of set- i. e ., the type of flexure and the specified limit of degree of flexure suitable for left-hand or right-hand application. (iii) firm to supply 10 % additional fittings with each set as per note-28 of rdsodrg. t-8780 alt. 4 of list 'a'. [ warranty period: 30 months after the date of delivery ]
Tender For manufacture and supply of elastic rail clips j to rdso drawing no. t- 8258 confirming toirs specification for erc j irs-t-31-2021 (fifth revision) and as amended 20 days prior to the date of closing of tender. [ warranty period: 30 months after the date of delivery ]
Tender For manufacturing and supply of 10125mm over-riding curved switch for 1 in 12 turnouts b.g. (1673mm) for 60 e1 rails as per rdso drg. no. t-4219 alt. 12, on psc sleepers and confirming to specification irs t-10-2025, complete with stock rails and all parts including check rails as listed in the drawing but excluding insulating liners, elastic rail clips, plate screws, fish plates and fish bolts. (list of fittings as per annexure b). (the alteration in drawing and specification issued by rdso up to one month prior to tender opening date shall be applicable). note: i. one set of spares/fittings as per list mentioned in table part a of drg. no. t-4219 alt. 12 shall be supplied with each lot of 10 sets of orc switch (annexure c). ii. contracts/supply orders will be issued for quantities in the multiple of 10 sets only. iii. lh & rh quantity: 50-50% each. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : manufacturing & supply of 11200mm curved switch with 60e1a1 thick web tongue rails for 1 in 16 turnout b.g. (1673mm) for 60e1 rail with r260 grade on psc sleepers for 25t axle load to rdso drg. no. t-10071 alt. nil and confirming to specification irs t-10-2025 with all fittings as per rdso drawing no. t-10071 excluding elastic rail clips & insulating liners. (list of fittings as per annexure b). (the alteration in drawing and specification issued by rdso up to one month prior to tender opening date shall be applicable). note: i. one set of spares/fittings as per list mentioned in table part c of drg. no. t-10071 shall be supplied with each lot of 10 sets of thick web switch (annexure c). ii. contracts/supply orders will be issued for quantities in the multiple of 10 sets only. iii. r-260 grade rail shall be utilized for the item. [ warrantyperiod: 30 months after the date of delivery ]
Tender For goods, manufacture and supply of elastic rail clips mk-v confirming to rdso drg.no.t5919 alt-2(latest alteration) and confirming to irs specification for erc s. no. t-31-2021- fifth revision (with amendment-2 & latest alteration) (note: latest alteration wherever used will mean the alterations up to the actual date of closing tender. ]
Tender For tender for supply of fish plates for 60 kg , fish bolts and nuts , elastic rail clips , metal liners to rdso , grooved rubber sole plate , sleepers pre streeses concrete , rails 60 kg of 13 meters long , lefthand takeoff with cms , righthand takeoff with cms
Tender For auction sale of depot ferrous scrap - pl no. 98097027 ferrous scrap consisting of condemned and unserviceable metal liner, washers, screws,round spikes,dog spikes,steel keys,hook bolt, plate/rail screws,bolt and nuts,cottors,clamps,loose jaws,safety clamps, rivets, clamps and similar items low melting in nature of sorts and sizes.note:1]not for sale item er clips 2]non ferrous items if found to be returned to railways.3]each location should be cleared completely before commencing delivery in the next location.
Tender For corrigendum : supply of running contract for 6400 mm curved switches with 60 e1a1 thick web tongue rails for 1in 8.5 turnout bg (1673 mm) for 60e1 rail with r260 grade on psc sleepers as per rdso drawing no. t-9775 with alteration 3 in accordance with rdso's standard drawing no.t-9774 alteration 2 and conforming to irs specification no. irs:t-10-2025 & irs:t - 62 -2025 (complete set) with latest revision/corrigendum/amendment complete with all parts listed in the sub assembly rdso drawing no. t-9775 but excluding standard fish plates, fish bolts, elastic rail clips, insulating liners/metal liners as amended up-to date of closing of e- tender. rails needed for fabrication purpose for tongue rails, stock rails and check rails will be arranged by supplier at his own cost in terms of railway board's letter no. 2022/track-1(p)/fabricators dt. 24.01.2022. list of fittings attached as annexure-c