Latest gauge plate Tenders | Government gauge plate Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38329057

31 Dec, 2024 31.60 Lacs

Goa - Goa

Tender For corrigendum : supply of networking items - cat6 cable , cat6 cable laying , face plate , back box , back box fixing , io , io punching , 24 port patch panel , 24 port patch panel punching , casing caping , installation casing caping , conduit pipe with accessories , installation of conduit pipe , 24 port poe network switch , installation configuration 24p poe , 24 port non poe switch 4x10g sfp , installation configuration 24p nonpoe , 48 port non poe network switch , installation of 48 port non poe swtich , 9u rack , 9u rack fixing , 15u rack , 15u rack fixing , wifi access points , wifi access points fixing , 6 port fibre patch panel , 6 port fibre patch panel installation , fibre cable 6 core , fibre cable laying , 1 mtr patch cord , 2 mtr patch cord , fibre patch cord , flexible pipe , sfp module 1g , configuration of firewall for branch setup

Central Government/Public Sector

CTN :38587147

03 Jan, 2025 NA

Ropar - Punjab

Tender For supply of back plate for acid pumps

Central Government/Public Sector

CTN :37928073

23 Dec, 2024 NA

Goa - Goa

Tender For corrigendum : supply of additional fastener for door hatches and remoable flooring - dog , hinge , welded key , curved stop with a hook , straight stop with a hook , curved stop , plate , clamp , back edge , spring clamp , buffer mounting bracket , plank , bolt eye , rail , suspension , holder , dog yk 202 , support , buffer with holder

CTN :38531145

31 Dec, 2024 58.12 Lacs

Uttarakannada - Karnataka

Tender For custom bid for services - undertaking 12k routines on all four gearboxes onboard ins makar -1. service, 1.01 removal of gearbox from main engine room and lowering and shafting it, near the location. job 04, 1.02 transportation gearboxes from nsry, karwar to out goa workshop and, return. job 04, 1.03 dismantling the gearbox and subassemblies, and offered for inspection to, inspecting authority. job 04, 1.04 check for any defective/broken/ damaged part during opening inspection. job 04, 1.05 check wear down of all gears and carry out dp/mpi test, if required. job 04, 1.06 check the condition of all bearings. job 04, 1.07 check wear down of clutch plated replace, if required. job 04, 1.08 assembly the complete gearbox by replacing damage and wear tear parts job 04, 1.09 check back lash and gear meshing and record. job 04, 1.10 check of axial play and clutch plate clearances job 04, 1.11 couple the gearbox with main engine. job 04, 1.12 harbour trial and sea trial job 04, supply of 2. spares, 2.01 ma1116d, roller element nos 40, 2.02 1020371, back plate clutch nos 04, 2.03 ma1147h, hose nos 04,

CTN :38519046

31 Dec, 2024 NA

Ghaziabad - Uttar Pradesh

Tender For supply of copper wire no 18 19 , gate valve heavy duty , bearing 6202 , bearing 6203 , capacitor , fan belt b 99 105reqd for himco , socket 6 group , shaft 5 gear power trac , bearing 6208 , bearing 6008 nr , shifter , sycnroniser , back gear teeth 02 canvas , brake spring , spring bolt , washer plane 24 no , spring washer , nut bolt 5 24 no , nut bolt 1 half 24 no , nut bolt 2 24 no , clipe hose pipe , clip hose pipe half , bucket teeth side , bucket teeth middle , bucket teeth bolt with nut , bracket 1210 , head stud 8 , fan belt b 48 , intermediate shaft s 855 , needle bush , sleeve for outer shaft , out put shaft , needle roller , coupling for shaft , gear box packing , bearing 32008 n , drill chuck teeth machine , bearing 6008 no , gear lever s 855 , thermostat , hose pipe s 855 , fan belt , blade rotavator , nut bolt rotavator , intermediate shaft , sleeve , shifter fork , needle bearing s 855 , pto shaft rotavator , steering oil tank s 855 , pipe for steering oil tank , universal joint 100 mm , pto shaft complete for rotavator , harrow disc 24 , pressure washer washing pump , feed pump n h , clutch plate s 855 , cross with body alternator , nut bolt 3 3 8 , rubber sheet 1 8 4 3 , angle iron 2 1 4 , m s round , diesel tank cap bid number/ ( ( ) ): gem/2024/b/5684618 dated/* : 10-12-2024 bid document/ 1 1 / 50

CTN :38391681

18 Dec, 2024 1.20 Crore

Rohtak - Haryana

Tender For corrigendum : tender notice for purchase of lab reagents for distt rohtak - epidural kit: 17g metallic introducer for catheter, 0.22 micro flat filter. kit includes 19g pur flexible epidural catheter with radiopaque line, catheter-guide, black mark at distal tip, detachable easy-lock adaptor, centimeter graduations (5 to 15 cm), single lumen venous catheter: tray with 16g fully radiopaque catheter for jugular/subclavian access (15 cm/20 cm), puncture needle, 10 ml syringe, j guidewire, paediatric triple lumen catheter kit: includes 4.5fr radiopaque polyurethane catheters (6 cm, 8 cm, 10 cm), triple lumen catheter, introducer needle, short i.v. cannula (22g), j or straight guidewire, et tube for neonates: endotracheal tube with secondary lumen for surfactant delivery, sizes 2, 2.5, 3 mm, echogenic nerve block needle for regional anesthesia: coated for maximum echogenicity, bevel types (17 lancet or 20 back-cut), various sizes (20-23g, lengths from 2.5 cm to 15 cm), radial arterial catheter kit: seldinger technique catheter for arterial puncture, 1 transparent xro catheter (pe) 20g, introducer needle 20g, straight guidewire, radiopaque transparent pur catheter: for venous/arterial access, dehp-free, sizes 2.5fr, 3.5fr, 4fr, 5fr, paediatric single lumen venous catheter kit: 22g/2fr central venous catheter, puncture needle (21g), straight metallic guidewire, radiopaque catheter with extension tube, fixation wings, picc catheter kit for newborn: pur catheter with stylet (1fr/28g, 20 cm), includes introducer splitting needle and measuring tape, picc catheter kit for neonates: 24g radiopaque pur catheter (5, 10, 15, 20 cm markings), peel-apart i.v. cannula, removable easy-lock connector with pur extension tube, plexygon electro-neuro-stimulator: lcd screen, adjustable impulse generator for plexus and peripheral nerve blocks, 0 to 6 ma, 1-5 ma, 0.5 ma increments, et tube holder: skin-friendly adjustable strap with flexible channel sleeve, customizable fit for tubes (7-10 mm), hydrocolloid foam base plate for stability, epidural/central line securement: dual securement device, waterproof, hypoallergenic, stretchable, velcro closure flap, foley catheter securement: dual securement device, waterproof, hypoallergenic, stretchable, velcro closure flap, universal tubings/lines securement (neonatal): waterproof, hypoallergenic, stretchable securement with velcro closure, vein shape securement: device with shape memory technology, feeding tube attachment: butterfly-shaped attachment with skin barrier hydrocollide base, adjustable swivel clamping mechanism for ng and ni tubes, drain & chest tube holder: sterile dual securement, silicon fixing plate, multiple sizes for drainage catheters (6-36 mm), sterile cotton pad for absorption, sterile nasal pad: skin-friendly, opaque, flexible, washable material to prevent pressure ulcers from cpap/bipap, size 8x3.5 cm, catheter securement universal: device with shape memory technology, leg bag sleeve: latex-free, washable, flexible sleeve for leg bags, with catheter holder and shape memory technology securement, universal disinfectant caps for catheter hubs: impregnated with 70% isopropyl alcohol for passive disinfection, boxer bandage (ready to use): safety mittens to prevent patients from pulling out lines/tubes, breathable material, adult & pediatric sizes, needlefree bag/bottle spike: iv bag and bottle spike with needle-free closed system, hydrophobic and antibacterial filter, for multiple vial/iv bag use, sterile hydrocolloid dressing (extra thin): size 12.5 x 12.5 cm, sterile hydrocolloid dressing with foam (extra thin): size 12.5 x 12.5 cm, sterile hydrocolloid dressing: size 18 x 18 cm, sacrum dressing: double-layered hydrocolloid dressing, size 18 x 16 cm, skin barrier spray: protective barrier spray for skin, 50 ml, content: siloxanes, medical adhesive remover spray: gentle, painless adhesive removal spray, 50 ml, content: siloxanes, colostomy/ileostomy kit (55mm/70mm): two-piece system

CTN :38518566

31 Dec, 2024 NA

Rewari - Haryana

Tender For supply of vehicle spare parts and mechanic tools - clutch master cylinder , air filter , wiper arm , indicator,parking top light , fuel filter , clutch plate, pressure plate, release bearing clutch, pilot brg , rear digi lock , front indicator assy. , oil filter partno-252718130145 , roof light led 24 volt , relay 4 pin , relay 5 pin , switch dashboard , oil filter part no-252518130139 , baby filter , oil filter , front break adjuster , indicator assy. front , wiper blade , gate valve 01inch pipe , gate valve 2.5 inch pipe , door lock handle outer lh rh , door glass beeding , door glass regulator machine rear rh , door glass regulator machine rear lh , floor mat , foot mat set 7d , door visor set rain guard set , data cable , back rest amron , door curtain set , hand rest , flag rod , commandant plate , star box set , star box stand , fan assy.radiator , bearing housing , fan pully , tensioner idealer , bearing fan pully , dala wire , rear view mirror , head light bulb , disc break , ball joint upper , ball joint lower , suspension bush kit , tie rod outer , kit lined shoes , wheel cylinder , shock absorbar , kit pad assembly , link stablisar rod rh , link stablisar lh , spring adjuster , wheel nut , fuel level sensor , fan electric assy. radiator , front hub oil seal , brg inner front , brg outer front , hub nut , clutch sleave cylinder , clutch plate, pressure plate, clutch release brg, pilot brg , front indicator assy. lh , front indicator assy. rh , back light assy. , spark plug , fuel pump motor , battery terminal plus,minus , nut bolt 14no. 16no. 18no. , lt wire .1mm , fuse 10,15,20,30,40,amr , horn 12 volt , horn 24 volt , welding rod 10 no. , welding rod 08 no. , wire lock , flasher 12 volt , areldite tube small , splite pin assorted size , fog light 12 volt , fog light 24 volt , commander light blue , sticker 12 no,05,no , bulb 67 no.24 volt , bulb 24 volt , bulb 24 volt 2441 , bulb 67 no. 12 volt , bulb 1016 no. 12 volt , bulb 1141 no.12volt , meter bulb 12 volt , meter bulb 24 volt , emery paper , old dhoti , duster cloth , putty , metal paste , cutter blade , socket no. 34 taparia , socket no. 36 taparia , socket no. 38 taparia , socket no. 41 taparia , socket no. 42 taparia , socket no. 46 taparia , alen key set star type , t socket wrinch no.08 , t socket wrinch no.09 , t socket wrinch no.10 , t socket wrinch no.11 , t socket wrinch no.12 , t socket wrinch no.13 , t socket wrinch no.14 , half moon spenner no.12x13 , half moon spenner no.16x17 , half moon spenner no. 18x19 , solding iron , solding paste and wire , locking plair , pipe rinch 60mm , combination spaner set , tool trolly with tools , tool box with tools , blow lamp , clutch and pressure plate , clutch release brg. , pilot brg. , power window switch , door glass machine rr , door glass machine rl , timing belt , heater glow plugs , glow plug timer bid details/ 2 / 114

CTN :38556473

02 Jan, 2025 NA

Papum Pare - Arunachal Pradesh

Tender For tender for supply of enq no 14 stone crusher parisram 20tph - v belt c section , v belt c section , fuel filter , fuel water separator , lub oil filter , air primary filter , air safety filter , 50 amp tp power contactor 230 vac , star delta timer 0-60 skc 230v , contactor , contactor relay (make-l&t) , 63a mcb tp , 12a contactor (3hp dol/4) , mpcb 426a (3hp dol/4) , hex bolt , spring washer , hex nut , gear motor 3 hp (2.2kw) , vibro motor , pull back rod spring , pull back rod spring , plain washer , hex. nuts , split pin (pisc-22-47-003) , swing jaw keeper plate bolt , cable 4 core 4mm (copper) , mb thimble 10mm , fc thimble 10mm , rc thimble 10 mm , fs thimble 10mm , nut 10mm , bolt 10mm , washer 10mm , benjo washer 24mm , benjo washer 19 mm , benjo washer 17 mm , benjo washer 10 mm

CTN :38518749

30 Dec, 2024 NA

Delhi - Delhi

Tender For supply of annual rate contract for repair and maintenance of steel and wooden furniture - change of channel of wooden computer table , change of kb tray and channel of wooden computer table , change of cloth of revolving chair high and low back including material and labour cost. , change of foam and cloth of revolving chair high or low back including material and labour cost. , change of leatherite of executive chair including upholstery , cutting and machine grinding of wooden table top glass , fitment of screws or bolts of chairs for repair. , fixing of wall clock wall maps boards hat stand etc using suitable apegs and nails or screws , full repair of chair including adjustment of height spring tilt threading of wheel hole revolving chair high or low back , making of hole on table for channeling of cables , opening of lock of steel furniture including steel almirah filing cabinets table and map chests etc , repair wooden hat stand or honour board , refurnishing or change of cloth and replacing foam 4 inch thickness 30 density including labour and material of wooden of single seater sofa , refurnishing or change of cloth and replacing foam 4 inch thickness 30 density including labour and material of wooden of two seater sofa , refurnishing or change of cloth and replacing foam 4inch thickness 30 density including labour and material of wooden of three seater sofa , refurnishing or change of cloth and replacing foam 4inch thickness 30 density including labour and material of wooden of single seater sofa with special cloth , refurnishing or change of cloth and replacing foam 4 inch thicknessm 30 density including labour and material of wooden of two seater sofa with special cloth , refurnishing or change of cloth and replacing foam 4 inch thickness 30 density including labour and material of wooden of three seater sofa with special cloth , repair of steel almirah filling cabinates tables and map chests including wlding as required removal of bends and dents and fitment of screws bolts as required of steel furniture , repair and adjustment of drawer or sleeves of steel almirah and table drawer , replacement of wheel of revolving chair high or low back , replacement of base with wheel of revolving chair high or low back , replacement of pvc arms of revolving chair high or low back , replacement of base plate of revolving chair high or low back , replacement of hydraulic system of revolving chair high or low back , supply and fixing of brass hooks for hat stand , supply and fixing of glass shelf for wooden book shelves almirah and wall , supply and fixing of 12 inch x 12 inch mirror for wooden hat stand , supply and fixing of locks for steel almirah , supply and fixing of locks for filing cabinet , supply and fixing of locks for steel tables drawer , supply and fixing of handles of steel almirah , shifting of tv , supply and fixing of set up box stand

Gauge Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector