Latest gi sheet sale Tenders | Government gi sheet sale Tenders

State Government

CTN :39601440

11 Mar, 2025 35.85 Lacs

Ranchi - Jharkhand

Tender For supply of spare parts for standard deep well hand pump im ii/im iii under d.w.and s. division, ranchi west, ranchi during the year 2024-25. - spare of deep well hand pump for im-ii & im-iii (vlom-65 & vlom-50) conforming to is:15500 (relevant part 1 to 8)/2004 (with latest amendment) only from manufacturers/ suppliers approved from bis/unicef after proper verification of offer sheet, inspection certificate, marking and packing etc, as per bis/unicef s standard norms., hexagonal bolt m12x1.75x40mm long common to im ii & iii, handle axle (stainless steel), ball bearing 6204 z, spacer for handle, chain with coupling, hexagonal rod coupling m12x1.75x50mm long., nitrile rubber cup washer for india mk-ii, pump head assembly (g.i.) with front cover , hexagonal nut & bolt & third plate., front cover (g.i.), handle assembly (g.i.), (a) water tank assembly for mark ii (g.i.), connecting rod 3mtr. long with coupling and nut (electrogalvanized), cylinder assembly complete set for im-ii, upper valve(plunger) assembly complete set for im ii, lower (check) valve assembly complete set for im ii, plunger rod (s.s,) for mark-ii, upper valve guide (g.m.) for mark-ii & mark-iii (vlom-65), third plate for head assemble (galvanized), cylinder body with brass liner for im-ii with reducer cap for top and bottom., gun metal spacer (bucket), 32mm g.i. socket, add 5% gst

State Government

CTN :39614819

12 Mar, 2025 31.14 Lacs

Ramgarh - Jharkhand

Tender For supply of spare parts of deep well hand pump conforming with latest amendment under dws division ramgarh 204-25 - spare parts of india mark ii deep well hand pump conforming to i.s. - 15500 (pt-ii)/2004 to be procured only from approved manufacturers from approved manufacturers from unicef approved qualified supplier & after proper verification of offer sheet inspection certificate marketing and packing etc as per unicefs standard norms, hexagonal bolt m12x1.75x40mm long common to both mk-ii & iii., hexagonal nut m12x1.75. , high tensile bolt m10x1.5x40mm long., nyloc nut m10x1.5mm, handle axle (stainless steel)., ball bearing 6204z., spacer for handle, chain with coupling., nitrile rubber cup washer for mark-ii & ill., nitrile rubber sealing ring mark-ii., nitrile rubber seating big for lower valve mark-ii., nitrile rubber seating small for upper valve mark-ii., hexagonal rod coupling m12x1.75x50mm long, pump head assembly (g.i.), front cover (g.i.), handle assembly (g.i)., water tank assembly for mark-ii (g.i.), connecting rod 3mtrs long with coupling & nut (electrogalvanized)., cylinder assembly complete set for india mark-ii., upper valve assembly complete set for lm-ii, lower valve assembly complete set for im-ii, reducer cap for cylinder mark-ii, plunger rod (s.s.) for mark - ii, upper valve guide (gm)., rubber seat retainer far mark- ii, third plate for head assembly (galvanized), cylinder body with brass liner for im-ii with reducer cap for top & bottom., brass linear, check valve seat for mark - ii, 32 mm g.i. socket, gst @ 5% (add sgst 2.5% + cgst 2.5%)

corporations/Associations/Others

CTN :39169804

14 Mar, 2025 3.74 Lacs

Kolkata - West Bengal

Tender For corrigendum : gc (galvanized corrugated) gi sheet barricading of front of esp unit 7 8, ctps, dvc

CTN :39582790

12 Mar, 2025 4.27 Lacs

Kalyani - West Bengal

Tender For supply of galvanized iron sheet for maintenance of nursery shed at kalyani central garden under kalyani range of urf division

Central Government And Public Sector

CTN :39566607

17 Mar, 2025 14.89 Lacs

Agra - Uttar Pradesh

Tender For emergency repairs to the complex of the itimad-ud-daulla tomb, agra -supply of materials - repair charges for 0.85 m height old m.s. iron grill with whereas required 40x40x6 mm angle iron frame & 10 mm square bar including straightining, cutting, welding etc. including primer & painting etc. complete in all respect. (rate including g.s.t.), fixing charges for old 0.85 m height m.s. iron grill from the boundary wall with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) having size of 2.00 nos post (0.30x0.30x0.30) m including required labour & t&p. etc. (rate including g.s.t.), taking out / removal of fallen brick work in lime mortar old mughal brick manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin-charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. (rate including g.s.t.), structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of engineer incharge. (rate including g.s.t.), providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin-charge. the sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (rate including g.s.t.), providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of engineer-in-charge. (rate including g.s.t.), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). (rate including g.s.t.), providing of 12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand) including labour and material etc. (rate including g.s.t.), supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads &

Corporations And Associations And Others

CTN :39566416

11 Mar, 2025 4.06 Lacs

Delhi - Delhi

Tender For barricading of local dumping site by providing and fixing precoated galvanized iron sheet along with ms frame near fcts bandh road devli in ward no.161/sz.

CTN :39513949

20 Mar, 2025 NA

Gandhinagar - Gujarat

Tender For supply of ms channel heavy h shaped 125mm x 75 mm x 8100mm , ms round pipe heavy 100mm x 100mm x 2700 mm , ms angle heavy l shaped 50mm x 50mm x 3000mm , ms angle heavy l shaped 40mm x 40mm x 3000mm , ms plate heavy square shaped 200mm x200mm x 4mm , galvanized colour coating roofing sheet 0.5mm x 1270mm x 2133mm

CTN :39518564

11 Mar, 2025 5.36 Lacs

Bokaro - Jharkhand

Tender For electrical repairing / re-wiring and changing of electrical items of 9.0 office, konar river side pump house (2 nos.) and civil office under kathara colliery. - wiring for light point /fan point/exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduct, with piano type switch, phenolic laminated sheet, suitable size m.s box and earthing the point with 1.5sq.mm frls pvc insulated copper conductor single core cable etc. as required. group a , supplying & erection of stay set complete (galvanized) with 19/20 mm dia x 1.8 meters long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm, thimble, stay clamps, turn buckle (20 mm x 60cm), 7/4.00 mm dia g.i stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 oarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling as required. 2. group b , wiring for light point /fan point/exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduct, with piano type switch, phenolic laminated sheet, suitable size m.s box and earthing the point with 1.5sq.mm frls pvc insulated copper conductor single core cable etc. as required.3. group c , supplying and fixing metal box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. (for light plugs to be used in non residential buildings)., supplying and fixing metal box of 150mm x 75mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (for light plugs to be used in non residential buildings)., supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. 1). 5/6 amps switch, supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. 2). 3 pin 5/6 amps socket out let, supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. 3). 15/16 amps switch, supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. 4). 6 pin 15/16 amps socket out let, supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required., supplying and fixing followings way, single pole neutral, sheet steel, mcb distribution board, 240 volts, on surface / recess, completed with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (but without mcb/rccb/isolator).i) 2 + 4 way / 8 way, double door, supplying and fixing 5 amps to 32 amps rating, 240/415 volts, c curve, miniature circuit breaker suitable for inclusive for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. i) single pole and neutral., wiring for circuit / sub main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc consult as required. i). 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire, wiring for circuit / sub main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc consult as required. ii). 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire, wiring f

corporations/Associations/Others

CTN :39495189

19 Mar, 2025 NA

Surat - Gujarat

Tender For procurement of different types of material. (annual ratecontract) - bucket 22 gauge,10 ltr capacity,20 gauge galvanized sheet, bucket (baldi) well reveated and with strong handel, crow bar(naraj) thickness:28 mm,lenght :1.50 mtr , material:m.s , shape:-octangular,weight:7.00 kag approx, painted with red color, handle for spade (pavda)wooden handle 2 6 long, handle for pick -axe (trikam) wooden handle 2 6 long, sovel with handle sovel made form good quality steel. weight 1.80 kg. approx handle length equals 700 mm with hand grip weight equals 0.750 kg approx., sutli good quality sutli, lock 6 lever godrej brand freedom padlock 6 lever lock with 2 key, lock 7 lever godrej brand freedom padlock 7 lever lock with 2 key, caution tape red and white caution tape (plastic) 3"" wide with tubing minimum gauge 125 micron. marked "" surat municipal corporation "" 1 role equals 300 mtr., tarpaulins hdpe (small) colour - blue, size: 5.0 x 3.0 mtr. with lamination tightening arrangement at all four corners , embossed with s.m.c. mark. weight : 1.750 kg.

State Government

CTN :39492057

13 Mar, 2025 NA

Chennai - Tamil Nadu

Tender For supply and erection of galvanized sheet fencing, repairing and rewinding work for submersible pump set, cleaning of sump and oht and replacing of sfrc manhole cover for the annual maintenance of 184 tngrhs at shanthi colony, anna nagar, chennai

Gi Sheet Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

Central Government And Public Sector

Corporations And Associations And Others

corporations/Associations/Others

State Government