Latest gi sheet Tenders | Government gi sheet Tenders

State Government

CTN :39700118

26 Mar, 2025 NA

Pune - Maharashtra

Tender For corrigendum : supplay material building and other construction at virwadi tal bhor - cement 53 grade, steel 6 mm bar, steel 8 mm bar, steel 10 mm bar, steel 12 mm bar, steel 14 mm bar, steel 16 mm bar, steel 18 mm bar, steel 20 mm bar, struchural steel, color coated sheets, gi sheet, purling, khadi (all size), crush sand, vrs sand, r.c.c cement pipe 6 inchi, r.c.c cement pipe 8 inchi, r.c.c cement pipe 10 inchi, r.c.c cement pipe 12 inchi, r.c.c cement pipe 18 inchi, r.c.c cement pipe 24 inchi, r.c.c cement pipe 36 inchi, chembar hd 1*1.5* foot, chembar hd 2*2 foot, chembar hd 3*3 foot, chembar hd 21 inchi, bricks 4 inchi, bricks 6 inchi, murum, vertified ties, shabad tandoor, feving block all, jcb, rollar, bituman, hand mixer, highjack loder, water tankar, rmc m15, rmc m20, rmc m30, door, sliding window, steel fram, window

State Government

CTN :39509735

29 Mar, 2025 54.00 Lacs

Rajkot - Gujarat

Tender For corrigendum : supplying and stacking various type of building, road & other constructionmaterials, at various places of block vinchiya, dist: rajkot under blockpanchayat, vinchiya under mgnrega (annual unit rate) - tiles - 600 x 600 x 16 mm, tiles - 600 x 600 x 20 mm, tiles - 600 x 600 x 15 mm, tiles - 600 x 600 x 0.5 mm gi metal, tiles - 600 x 600 x 0.5 mm gi metal with 20 perforation area with 1.8 mm dia holes and having nrc (noise reduction coe cient) of 0.5, hysd bar, brick bats chhara, brick aggregate 40mm size, c.i. greating 100 mm x 100 mm, c.i. nahni trap, cement, cement bags (empty), ceramic tiles, chicken wire mesh 16 x24, coarse sand, common burnt clay bricks conventional size, common burnt clay bricks modular size 20x10x10 cm, crushed stone aggregate for hard quality 10 to 20mm size, crushed stone aggregate for hard quality 10mm size, crushed stone aggregate for hard quality 20mm size, crushed stone aggregate for hard quality 40mm size, crushed stone aggregate for hard quality 40mm to 63mm size, crushed stone aggregate for hard quality 6 to 10mm size, crushed stone aggregate for hard quality 6mm size, diesel, distemper primer, dry distemper, fine sand, flat back wash basin white vitrious china 450mm x 300mm size, flushing cistern white vitrious with c.p. brass handle etc. 12.5 litre low level, fly ash brick, fuel steam coal, granite slab (18 mm thick) 1 side polished, m.s. plate / flat, mild steel bars, murrum/ binding material, polished kota stone slab green. 25 mm thick, pre-cast cement concrete tiles, putty as per isi specification for fixing glass on steel windows., quarry spall., r.c.c heavy duty non-pressure pipe i.s. class np2 300mm dia., r.c.c heavy duty non-pressure pipe i.s. class np2 450mm dia., r.c.c heavy duty non-pressure pipe i.s. class np2 900mm dia., r.c.c heavy duty non-pressure pipe i.s. class np2 600mm dia., rolling shutter rolling shutter of g.i. sheet any size grill, rubble, stone dust, t.m.t. bars fe- 415, vitryfied granite tiles 8 mm to 10 m thick 24 x 24 size dark shade, vitryfied granite tiles 8 mm to 10 m thick 36 x 36 size

Central Government/Public Sector

CTN :39792807

11 Apr, 2025 NA

Jorhat - Assam

Tender For camp painting to wall and gi sheet roof to certain buildings in tech area at afs under ge (af) jorhat

Central Government And Public Sector

CTN :39809435

04 Apr, 2025 6.52 Lacs

Rohtak - Haryana

Tender For supply of 5tr ductable ac,itc,ms stand,ms stand,cu refg pipe,cu refg pipe,cu refg pipe,upvc pipe,upvc pipe,cu cable,cu cable,cu cable,mcb db,mcb db,gi sheet,gi sheet,sag,cable tray,cable tray

Central Government And Public Sector

CTN :39774492

02 Apr, 2025 11.77 Lacs

Kharagpur - West Bengal

Tender For supply of 3tr ductable split ac units , itc of 3 tr inverter type ductable ac , copper pipe 3 by 8 inch dia 18g , copper pipe 5 by 8 inch dia 18g , sitc of 32 mm rigid u pvc piping , iron stand , m.s. cable trays , pvc sheathed armoured copper conductor cable , providing copper pipe wrapping with pvc tape , 24g gi sheet cowl , providing canvas connection , supply air grill , support for indoor unit hanging etc as reqd

CTN :39792081

27 Mar, 2025 2.51 Lacs

Delhi - Delhi

Tender For supply of material for day to day maintenance services under the jurisdiction of postal civil enquiry , sarojini nagar , new delhi. =- acrylic emulsion paint, premium acrylic smooth exterior paint, aluminium composite panel, aluminium extrusions, aluminum sections, board & plywood, ceramic/rectified tiles, cp fittings, cpvc pipes, designer coloured cement concrete floor tiles for external used / concrete paver blocks., epoxy primer & paints, float glass, flush doors (isi mark only), galvanized/stainless steel anchor, fasteners, gun metal gate valve, gypsum board false ceiling, hardner, hydraulic door closer, hydraulic floor spring, laminate, melamine polish, m. s. pipe, marine plywood / bwp ply, oil bound distemper, sanitary fittings, plastic connection pipe, ply wood, pre-coated gi sheet for roofing, polymer modified cementitious grout, pre-laminated particle board is :, 12823 (gr-i, type-ii), primer, pvc rain water pipe & fitting, is:13592 type a, pvc shutter, pvc tank (isi marked), r. c. c. pipes (np-2), solid plastic seat cover for ewc, stainless steel, stainless steel sink with or without draining board., structural silicon sealant, structural steel section, synthetic enamel paints, textured exterior wall paint, towel ring/towel rod/towel, rack., tubular section windows, tmt bars, vitrified tiles, waste pipe, water proofing compound, (liquid), wire mesh, white cement, wall putty, work stations/ modular furniture, stoneware pipe and gully trap, pvc flushing system, tactile tiles, plastic emulsion paint, supply at site of g.i. pipes (15mm dia. nominal bore), supply of u-pvc (working pressure 4kg/cm2) single socketed pipe 110mm diameter, supply of gi union 15mm nominal bore, supply of putty for glass panes., supply of u-pvc bend 110mm bend, supply of u-pvc pipe clip 110mm, providing at site of ptmt waste coupling for wash basin and sink, of approved quality and colour.a) waste coupling 40mm of 79mm length and 62mm breadth weighing not less than 45gms., supply at site of float/froasted glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm), supply at site of flexible (coil shaped) pvc waste pipe for sink and washbasin having length not less than 700 mm i/c pvc waste fittings, 32mm nominal diameter, 40mm nominal diameter, supply at site of ptmt bib cock 15 mm nominal bore, 86 mm long, weighing not less than 88 gms, supply at site of ptmt stop cock of approved quality and colour., 15 mm nominal bore, 86mm long. weighing not less than 88 gms., galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm, supply at site of ptmt ball cock 15mm complete with epoxy coated aluminium rod & h.d. ball, supply at site of ptmt pillar cock of approved quality and colour., a) 15 mm nominal bore, 107 mm long, weighing not less than 110 gms, supply at site of vitreous china flat back wash basin 450x300 mm, supply of oxidised mild steel handles 100 mm, supply of oxidised mild steel tower bolt (barrel type) 200x10mm, supply of bright fininshed or black enameled mild steel bolts and nuts 50x6 mm, supply at site of polyethylene water storage tank with cover and suitable locking arrangement, supply at site of white vitreous china orissa pattern w.c. pan of size 580x440 mm, supply at site of 100 mm s.c.i. trap with vent heel for w.c, supply at site of flushing cistern p.v.c 10 lts capacity ( low level ) (white) ( with fittings, accessories and flush pipe), supply at site of pvc connection pipe 450 mm with brass unions and collar bush, supply of coarse sand, supply of stone aggregate (single size) : 20 mm nominal size, providing at site of bright fininshed or black enameled mild steel screws 50 mm, providing at site of bright fininshed or black enameled mild steel screws 40 mm, providing at site of bright fininshed or black enameled mild steel screws 25 mm, providing at site of bright fininshed or black enameled mild steel screws 20 mm, supply of cp brass bib cock 15 mm nominal bore, supply

CTN :39792136

26 Mar, 2025 3.04 Lacs

Delhi - Delhi

Tender For supply of material for day to day maintenance services under the jurisdiction of postal civil enquiry , rk puram , new delhi. - acrylic emulsion paint, premium acrylic smooth exterior paint, aluminium composite panel, aluminium extrusions, aluminum sections, board & plywood, ceramic/rectified tiles, cp fittings, cpvc pipes, designer coloured cement concrete floor tiles for external used / concrete paver blocks., epoxy primer & paints, float glass, flush doors (isi mark only), galvanized/stainless steel anchor, fasteners, gun metal gate valve, gypsum board false ceiling, hardner, hydraulic door closer, hydraulic floor spring, laminate, melamine polish, m. s. pipe, marine plywood / bwp ply, oil bound distemper, sanitary fittings, plastic connection pipe, ply wood, pre-coated gi sheet for roofing, polymer modified cementitious grout, pre-laminated particle board is :, 12823 (gr-i, type-ii), primer, pvc rain water pipe & fitting, is:13592 type a, pvc shutter, pvc tank (isi marked), r. c. c. pipes (np-2), solid plastic seat cover for ewc, stainless steel, stainless steel sink with or without draining board., structural silicon sealant, structural steel section, synthetic enamel paints, textured exterior wall paint, towel ring/towel rod/towel, rack., tubular section windows, tmt bars, vitrified tiles, waste pipe, water proofing compound, (liquid), wire mesh, white cement, wall putty, work stations/ modular furniture, stoneware pipe and gully trap, pvc flushing system, tactile tiles, plastic emulsion paint, supply at site of g.i. pipes (15mm dia. nominal bore), supply of u-pvc (working pressure 4kg/cm2) single socketed pipe 110mm diameter, supply of gi union 15mm nominal bore, supply of putty for glass panes., supply of u-pvc bend 110mm bend, supply of u-pvc pipe clip 110mm, providing at site of ptmt waste coupling for wash basin and sink, of approved quality and colour.a) waste coupling 40mm of 79mm length and 62mm breadth weighing not less than 45gms., supply at site of float/froasted glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm), supply at site of flexible (coil shaped) pvc waste pipe for sink and washbasin having length not less than 700 mm i/c pvc waste fittings, 32mm nominal diameter, 40mm nominal diameter, supply at site of ptmt bib cock 15 mm nominal bore, 86 mm long, weighing not less than 88 gms, supply at site of ptmt stop cock of approved quality and colour., 15 mm nominal bore, 86mm long. weighing not less than 88 gms., galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm, supply at site of ptmt ball cock 15mm complete with epoxy coated aluminium rod & h.d. ball, supply at site of ptmt pillar cock of approved quality and colour., a) 15 mm nominal bore, 107 mm long, weighing not less than 110 gms, supply at site of vitreous china flat back wash basin 450x300 mm, supply of oxidised mild steel handles 100 mm, supply of oxidised mild steel tower bolt (barrel type) 200x10mm, supply of bright fininshed or black enameled mild steel bolts and nuts 50x6 mm, supply at site of polyethylene water storage tank with cover and suitable locking arrangement, supply at site of white vitreous china orissa pattern w.c. pan of size 580x440 mm, supply at site of 100 mm s.c.i. trap with vent heel for w.c, supply at site of flushing cistern p.v.c 10 lts capacity ( low level ) (white) ( with fittings, accessories and flush pipe), supply at site of pvc connection pipe 450 mm with brass unions and collar bush, supply of coarse sand, supply of stone aggregate (single size) : 20 mm nominal size, providing at site of bright fininshed or black enameled mild steel screws 50 mm, providing at site of bright fininshed or black enameled mild steel screws 40 mm, providing at site of bright fininshed or black enameled mild steel screws 25 mm, providing at site of bright fininshed or black enameled mild steel screws 20 mm, supply of cp brass bib cock 15 mm nominal bore, supply of cp b

CTN :39800457

03 Apr, 2025 NA

Salem - Tamil Nadu

Tender For providing cladding arrangement with gi sheet to a length of chainage 0m to 60m from northern side of cpu building along the road side on the western side of esp yard to control the ash pollution and dismantling the existing two wheeler parking shed in the above yard.

CTN :39800463

04 Apr, 2025 NA

Salem - Tamil Nadu

Tender For providing cladding arrangement with gi sheet to a length of chainage 60m to 130m on the western side of esp yard area (near cpu building)

CTN :39797226

03 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For replacement of insulation in the hot air duct for mills 1a to 1f including supply of necessary insulation, gi sheet and consumables during the modular replacement of duct (existing insulation removal during the overhaul period and renewal of insulation after overhaul while unit in service (on line)) for the year 2025-26

Gi Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector