Latest glazed tile Tenders | Government glazed tile Tenders

CTN :38929384

06 Feb, 2025 1.00 Crore

Palakkad - Kerala

Tender For supply of material for mgnrega - supply of materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate 10 mm nominal size, stone aggregate (single size ) 50mm nominal sise, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, through and bond stone size 24 x 24 x 39cm, stone aggregate(single size): 10 mm nominal size, solid blocks of size 40x20x20cm, solid blocks of size 30x20x15cm, twisted steel/deformed bars, royality of good earth, pvc tee 63x63x63mm dia, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, safeda ballies 125 mm diameter, mild steel sheets for tanks, quarry waste, mangalore tile 20mm thick, mangalore ridge tile 20mm thick, pvc elbow 63mm dia, fine sand (zone iv), pvc bend 63mm dia, vitrified floor tile 50x50 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, pvc pipe 40 mm outer dia 10kgf/cm2, pvc pipe 75 mm outer dia 6kgf/cm3, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc reducer 63x50mm, galvanised weir mesh of average width of aperture 1.4 and nominal dia.of wire 0.63mm, deharadun white lime, green net, dry distemper, water proofing cement paint, synthetic enamel paint in black or chocolate shade, precoated galvanised steel plain ridge, mild steel round bar 12 mm dia and below, welding by electric plant, polyethylene water storage tank with cover and suitable locking arrangemnet, average rate of mild steel round bars for reinforcements, stone aggregate(single size): 06 mm nominal size, interlocking c.c. paver block (80 mm thick, m-30), pvc pipe 63 mm outer dia . 6kgf/cm2, galvanised steel j or l hooks 8 mm dia, bitumen washer, pvc socket /coupling 63mm dia, precoated aluminium trafford sheet 0.350mm thick, precoated aluminium trafford sheet 0.450mm thick, brick tile, rate of casting ring (150 cm dia and 30cm height ) including costing transportion and placing in position, rate of casting ring (120 cm dia and 30cm height ) including costing transportion and placing in position, anjali wood scantles 50x20 mm, pincode wood scantles 50x20 mm, polyethylene bag, cowdung, brick, adjustable telescopic prop 3m, beam clamp 300-380mm, plastic emulsion paint, stainless steel kitchen sink- without drain board 470*420 mm bowl depth 178mm, ceramic glazed tiles ist 300x300 mm in all shades and designs of white, ivory,grey, fume red brown etc.

State Government

CTN :39079993

10 Feb, 2025 1.15 Crore

Surendranagar - Gujarat

Tender For supply of mgnrega - supplying common bunt clay bricks conventional size , supplying common bunt clay modular bricks 20x10x10 size , supplyion of 53 or 43 grade open on pipe cement of isi approved brand , supplying of fine sand on sie , supplying of corse sand on sie , providing and fixing 35 mm thick shutter for door and window and clear story window including anodised alluminium butt hinges with necessary screws.(a) indian teak wood.(ii)fully panelled , providing 25 mm thick for cupboards etc including black enamelledd m.s.butt hinges with necessary screws. partly panelled & partly glaged with iron hinges , providing and fixing glazed louvered glass window and ventilation with teak wodd frame 10 com x 7 cm size incl. 3 coat of oil painting to wood work etc. , supplying rough kota stone 25 mm thick , supplying of glazed times of 15 x 15 x 6 cm size or approve size , supplying of vitrified tiles 24 x 24 size antiskid , supplying of dry distember primer , supplying of distember primer , supplying of water proof cement paint , supplying of birla well care putty , supplying of plastic emulasion paints , suplying of indian type squating pan w.c. , supplying of urinol , supplying of upvc pipe (a)20 mm dia , supplying of upvc pipe (a)15 mm dia , supplying of upvc pipe (b) 32 mm dia , supplying of upvc pipe (b) 25 mm dia , supplying of 6 kg/ cm2 pvc pipe (c) 110 mm dia , supplying of 10 kg/ cm2 pvc pipe (c) 110 mm dia , supplying of 100 mm dia, 60cm long ston ware pipe , supplying of 160 mm dia upvc, pipe , supplying of brass screw down bib tap of 15 mm dia , supplyin of c i nahni trap , supplyin of pvc swr gully trap 160x110 , supplying of pvc water tank of approved make , supplying of 32 mm gun metal valve , c i cover with frame size 500/700 , c i cover with frame size 300/300 , supplying of tmt bars fe415 rinforcment for rcc work , supplying of stainless steel glosy asis 304 grade 1mm thick with over all size 610x460 mm and bowl size560x410x200 , supplying of 30 mm thick factory made solid panal pvc door stter , supplying of paver block mk 250 grade 60 mm thi , supplying of curve , supplying of np-2 non pressare pipe (a)150 mm dia , supplying of np-2 non pressare pipe (b)300 mm dia , supplying of np-2 non pressare pipe 450 mm dia , supplying of np-2 non pressare pipe (d)600 mm dia , supplying of np-2 non pressare pipe (e)900 mm dia , supplying of np-2 non pressare pipe (f)250 mm dia , supplying of np-3 non pressare pipe (b)300 mm dia , supplying of np-3 non pressare pipe (b)450 mm dia , supplying of np-3 non pressare pipe (b)600 mm dia , supplying of np-3 non pressare pipe (b)900 mm dia , supplying of 10mm aggregate , supplying of 20mm aggregate , supplying of 40mm to 63mm aggregate , supplying of stone dust , through and bond stone , supplying of rubble , supplyin of galvenised corrugated sheet 0.8 mm thic , gi j or l hook , supplying of galvenised mild steel tube 50 mm dia , steel work welded, in built up sections, framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint (a) in beams and joists, channels, angles, tees, flats with connecting plates or angle cleats as in main & cross beamnship & jack rafters, purlins connected to common rafters and like. , flat back wash basin color glazed 450x 300 size , providing and fixing extruded aluminium windos having extyuded aluminiyum colour anodized section

State Government

CTN :39005153

27 Jan, 2025 16.43 Lacs

Chamba - Himachal Pradesh

Tender For repair and maintenance of pwd rest house at chamba (sh p/l antiskid tile provide & fixing of ceramic glazed tile plastering and sanitary installation work )

CTN :39038445

29 Jan, 2025 28.39 Lacs

Tirupati - Andhra Pradesh

Tender For a/r & m/o holiday home at tirupati during 2024-25. sh miscellaneous repair works, plumbing, carpentry and sanitary fittings works, replacement of double glazed window glasses, tiles, door shutters & painting etc

CTN :39051007

10 Feb, 2025 2.51 Lacs

Rohtak - Haryana

Tender For maintence and repair of house ie floor tile, cement plaster, glazed tile , obd, putty, paint in house no. 30/type-4 mdu, rohtak

Central Government/Public Sector

CTN :39052151

05 Feb, 2025 6.80 Lacs

Gurgaon - Haryana

Tender For provn of glazed tiles covered platform, flame proof electrical fittings and anti sulphuric tiling in ct room of bcr at af stn palam under ge (af) gurgaon no.1

State Government

CTN :39061175

30 Jan, 2025 3.48 Lacs

Baramulla - Jammu And Kashmir

Tender For elementary major repair at gms shudwani. - demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: in cement mortar, demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: in cement mortar., earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: all kinds of soil :, providing and laying of stone soling (hand packed) including ramming, dressing and watering all complete.(incl. all sorts of cost & carriage)., providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. all works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete as per direction of engineer incharge at site., random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: cement mortar 1:6 (1 cement : 6 coarse sand) (quarry), providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete, brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand), labour for form work to retain the celing and truss as per direction of engineer incharge at site complete job, labour for dismantling wood work in frames, trusses, purlins and rafters etc as per direction of engineer incharge at site complete job, providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of engineer-in-charge. 35mm first class kail wood complete job, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, painting with synthetic enamel paint of two or more coats on new work approved brand and manufacture on wet or patchy portion of plastered surfaces: as per direction of engineer incharge at site., providing and fixing 1st quality ceramic glazed floor tiles conforming to is : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge in skirting, rise

State Government

CTN :39017806

10 Feb, 2025 1.00 Crore

Tapi - Gujarat

Tender For supplying and stacking various type of building, road & other construction materials,atvariousplacesoftalukakukarmunda under talukapanchayat, kukarmundaunder mgnrega (annual unit rate) - aluminum powder, aluminum sheet 22 guage thick, angle size 15 x 15 cm. (glazed), asbestos rope, barbed wire for fencing of galvanized steel wire, bat clamps 100 mm dia, bat clamps 80 mm dia, bilimoria brick, binding wire of 18 gauge thick annealed iron, binding wires, black stone for cooking platfrom (1.50 sq.mt.), blasting powder, bolt l 3 to 4 size iron (7.5cms to 10 cms), bolts 12 mm dia. 10 cm. long, boundry stone, brick bats chhara, brick aggregate 40mm size, c.i. nahni trap, c.r.c sheet, cement, cement bags (empty), ceramic tiles, chicken wire mesh 16 x24, coal tar, coarse sand, cold twisted bars, commercial plywood sheet 12 mm, commercial plywood sheet 19 mm, commercial plywood sheet 25 mm, commercial plywood sheet 6 mm, common burnt clay bricks conventional size, corrugated a.c. sheet 6 mm thick, corrugated a.c. sheet 7 mm thick, crimp jali 12 gauge, crushed stone aggregate for hard quality 10 to 20mm size, crushed stone aggregate for hard quality 10mm size, crushed stone aggregate for hard quality 20mm size, crushed stone aggregate for hard quality 40mm size, crushed stone aggregate for hard quality 40mm to 63mm size, crushed stone aggregate for hard quality 6 to 10mm size, dark shade pigment, diesel, distemper primer, dry distemper, enamel paint, enamel primer, expanded metal jali 12 x 12 gauge, fevicol s.r. 998, fine sand, flat back wash basin colour glazed 450 x 300 size, aluminum powder, aluminum sheet 22 guage thick, angle size 15 x 15 cm. (glazed), asbestos rope, barbed wire for fencing of galvanized steel wire, bat clamps 100 mm dia, bat clamps 80 mm dia, bilimoria brick, binding wire of 18 gauge thick annealed iron, binding wires, black stone for cooking platfrom (1.50 sq.mt.), blasting powder, bolt l 3 to 4 size iron (7.5cms to 10 cms), bolts 12 mm dia. 10 cm. long, boundry stone, brick bats chhara, brick aggregate 40mm size, c.i. nahni trap, c.r.c sheet, cement, cement bags (empty), ceramic tiles, chicken wire mesh 16 x24, coal tar, coarse sand, cold twisted bars, commercial plywood sheet 12 mm, commercial plywood sheet 19 mm, commercial plywood sheet 25 mm, commercial plywood sheet 6 mm, common burnt clay bricks conventional size, corrugated a.c. sheet 6 mm thick, corrugated a.c. sheet 7 mm thick, crimp jali 12 gauge, crushed stone aggregate for hard quality 10 to 20mm size, crushed stone aggregate for hard quality 10mm size, crushed stone aggregate for hard quality 20mm size, crushed stone aggregate for hard quality 40mm size, crushed stone aggregate for hard quality 40mm to 63mm size, crushed stone aggregate for hard quality 6 to 10mm size, dark shade pigment, diesel, distemper primer, dry distemper, enamel paint, enamel primer, expanded metal jali 12 x 12 gauge, fevicol s.r. 998, fine sand, flat back wash basin colour glazed 450 x 300 size

State Government

CTN :36800624

25 Jul, 2024 1.30 Crore

Nagaur - Rajasthan

Tender For matarial supply for nrega scheme and other - p.p.c., white cement, fine prechiger, rail/gravel, gravel local, ballast stone brick for other than road work, 400mm measurement hand broken sit boids cart 1/11), 400mm stone broken boids cart 1/11, amin stone broken boids cart 12/10/6 tikesher, samyo for road work, 63-40mm stone broken boids cart 1/11, 63-40mm hand broken stone road boil cut 1/11, 90-45mm. hand broken stone aggregate, kori ravish boyce cart 1/6), yevla boids cut 1/6), binding samayi 14-6) (dal cut 1/, brick (22.5117.50 cm), first class (stassi, second class, solin khareja chilai stone, masonry bera (, masonry ratha (chi, baranja soling (for digging work upto 15cm height), baranja soling (for road paving work 23cm height), arch width of sheet 10-12 length 2-3 morai 2.5-357, stone sheet (flaky materia(3-4" thick & length, 1-2" width, sandstina dpc, sl, coping lintel, tand almira et, 250mm thickness upto 25-40mm thickness, upto 40-50mm thickness, upto 2300 sq. cm, polished kota stone one side side, upto 1000 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble stone carving mirror 20mm thick, upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble chips, marble powder, marble stone (rajasthani 20mm thick), upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, stone grate, single pail 100 x 75 mm, double pail 125 x 75 mm., stone pail, upto 1.5 m length, minimum 40mm thick , 1.5 m to 2.40 m length, minimum 50mm thick , 2.4 m to 3.0 m length, minimum 65mm thick , above 3.0 in length, minimum 75mm thick , precast tiles/rocks , glazed su-30x45 cm , verified size-60x60 cm , interlock tiles/b rick/block for road work , cement interlocking block m-30grade, 80mm thick , fittings with local cash. for doors, windows and furniture), others / teak, factory made doors (30 mm thick, solid and single sheet), structural steel, iron (tor steel fo-415/500 for reinforcement, widing via 18 gauge, iron girders, conia iron square green/leaf angle aman, jage wine and 14 quaestrad/34 jani, barbed iron lar size 12 guage wire and 12 guage strad/12, iron mesh (24 gauge, 14 mesh, module gi box, 2 for soil, 3 for module, module base and cover plate, 2 for module, 3 for module, modular swaying in, 15 marked, sp 5/6 ampere, sp 15/16 ampere, modular circuit outlet, marked, 6 pin 15/16 amp, steel fastener 5 mm 75 mm, scb db, 2+2 way, spn, single door, 2-4 in, spn, single door, 2+6 in, spn, single door, gi pipe (medium thickness., 15.00 mm dia, 40.00 mm dia, copper wire 8 swg (4.00 mm dia) (0.117 kya/m), ci/ms cover plate attached to frame with locking arrangement, pvc water tank body cover (as per 15:12701-1989, diesel road roller 8 to 10 ton, tractor (25-40 hp), tractor trolley, tractor water tanker samta 4000 liter weight, cement ket mixer 5-7 cubic feet, pumping set 15 hp, niddle/plate better mm operator, -grinding machine with operator big, motor i.e.), compressor, hydraulic excavater/cb (bucket capacity 0.4cum), scraper, shuttering ply with beam and other material, shuttering ply with batti and other material, shuttering nohe plate with batti and other material

Glazed Tile Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

State Government

State Government