Latest graphite crucible Tenders | Government graphite crucible Tenders

Central Government/Public Sector

CTN :39605719

29 Mar, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply of general pupose hydraulic jack light weight alloy steel 50 toncapacity x 100 mm stroke single acting spring return & plainram with freem oil seal kit for working pressure 700 bar withmake hydraulic hand pump suitable for operating singleacting 50 tons capacity x 100 mm stroke 1 no. steel bodysingle acting & two speed /stage, oil tank cap 5 liter & built inrelief valve, filer vreather cun drain plug, lifting handle formax. working pressure 100 bar(a) quick disconnect couplerset with steel construction for working pressure :0-1000 bar,pressure gauge, glycerin filled (b) high pressure thermoplastichose pipe meter with eng fitting for working 700 bar alongwith above accessoriesmake: masko tech, vankos, hydrodynamics only required, hydraulic low hight jack light weight alloy steel 100 tonscapacity x 60mm stroke single acting spring return & plainram with free oil seal kit for working prassure 700 bar withmake hydraulic hand pump suitable for operating singleacting 100 tons capacity x 60 mm stroke 1 no steel bodysingle acting & single speed/stage, oil tank cap:3 liters &built in relief valve, filer vreather cun drain plug, lifting handlefor max. working pressure 700 bar along with aboveaccessories (a) wuick disconnect coupler set with steelconstructin for working pressure 100 bar.(b) high pressurethermoplastic hose pipe 2 mtr. long with end fittings forworking pressure 700 bar(c) bottom mounted with gaugeadapter, stand pipe & end fittings pressure: 0-1000 bar,pressure gauge, glycerin filled make: masko tech, vankos,hydro dynamics only required , double ended open spanner, size 46x51 make taparia,stanlay, or similar , supply , installation and commissioning ofautomaticoperated ro water purifier 120 ltr capacity with1year company warranty with full consumable andadditional2 year full comprehensive amc , portable water coolers with inbuilt ro purification as perattached annexure "a", make/brand bluestar/kent/eureka forbes/voltas/aqua guard , industrial safety helmet of size 600 mm with isi certified asper detailed description/specification attached annexure-a,colour as per requirement of consignee at time of delivery , ratchet type torque wrench of capacity 68-340 nm, 1/2accepted make : mcmaster, stanley, de neers ,griphold, chicago pneumatic, norber (uk), stahlwilleonly , ratchet type torque wrench of capacity 135-675 nm, 3/4"make: taparia / stanley / gedore / mcmaster only , ratchet type torque wrench of capacity 110-550 nm, 3/4accepted make : griphold, chicago pneumatic,norber (uk), stahlwille or taparia only , ratchet type torque wrench of capacity 50-220 nm, 1/2" sqdrive. make: chicago / griphold / ingersoll rand/stanley/deneers only , ratchet type torque wrench of range 10-70 nm with 1/2sq.drive. note:material to be supplied with calibrationcertificate and warranty certificate. make: mcmaster,stanley, de neers , griphold, chicago pneumatic,norber (uk), stahlwille , weather seal silicon sealant 280 ml makedr.fixit/pidilite/loctite/dowsil/anabond. themanufacturing date should be within one month at the timeof delivery , roofing felt bitumen self finished in rolls of 90cmx20mtrs.specn: bis specification no:is:1322/1993(latest amendt.) typeiii , tarplastic bituminous compound for water-proofing andcaulking purposes used steel drum packing material, multipurpose plastic sheets are made from longlasting, sturdy and durable waterproofling plasticsheets. polysheet suitable for covering 1400 hhpdmu dpc iv coupler., silver industrial duct tape, length 50 meter.(detailed spec. asper product 1 of gem contract no. gemc-511687728770802dt. 18/05/2024) , tamper check paste(30 ml)(highly visible, viscous andfluorescent in nature) as per attached specification colour:red/orange, tip size: 2.9 mm, extra nozzle of 1 mm and 2 mmshould be provided. epoxy adhesive consisting of standard epoxy resin ina pack of 1000 grams & hardener in a pack of 800grams conforming to specification no.is: 12994/1990-2005.containe

CTN :39629535

17 Mar, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of bitumen compound readymade bituminous pothhole patching mix used in water proofing ad hesive. it is dark black or brown in colour usually solid at normal temperatures and becomes liquid on heati ng mix in concrete [ warranty period: 30 months after the date of delivery ]

CTN :39195239

13 Mar, 2025 NA

North 24 Paragana - West Bengal

Tender For corrigendum : supply of graphite crucible for laddle of slag melting furnace as per msf drg no. lfvd/1000/22 (sheet no. 3/3)

CTN :39543982

10 Mar, 2025 1.37 Crore

Patna - Bihar

Tender For mr-n- 19-20 pupri-09 - choraut bazar to purandih, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of panel concrete, plain cement concrete pavement, thickness as per design over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501, kilometre stone :- reinforc

CTN :39538852

24 Mar, 2025 34.50 Lacs

Leh - Jammu And Kashmir

Tender For supply of construction material - stone aggregate 12-20 mm graded as per is-383 , stone aggregate 40 mm graded as per is-383 , stone aggregate 63 mm graded as , sand as per is-2430 , rr stone as per is- 1597 , quick setting compound , brick bats oblique stone agg 40 to 63mm , lime , black granite slab 16-18 mm , bitumen , white cement , pcc blocks 400x200x200mm , hardcore as per is-383 , bituminous filler board 8 feet x 4 feet

Central Government/Public Sector

CTN :39478532

18 Mar, 2025 NA

Medak-T - Telangana

Tender For supply of clay graphite crucible for melting copper alloy

CTN :39348099

08 Mar, 2025 1.48 Lacs

Agartala - Tripura

Tender For supply of laboratory and scientific equipment - supply of consumable items for dual chamber physical vapour diposition system, silicone fluid, grade hivac f4 (details as per list 1 at annexure-i)., legris 8mm semi rigid nylon tube 1025p 08 04 (details as per list 2 at annexure-i)., quartz crystals gold plated 6 mhz # q18010, ts06ig, 103220, make fil-tech itasco maxtek (details as per list 3 at annexure-i)., tungsten basket 200 amps, drg no 0380-020-200 (details as per list 4 at annexure-i)., graphite crucible for eb3 drg no 0330-300-070 (details as per list 5 at annexure-i)., molybdenium boats 200 amps (0380-130-200) (details as per list 6 at annexure-i)., set of 0 rings for dual chamber pvd system part no:5306-000-000 (details as per list 7 at annexure-i)., eb3 filament (details as per list 8 at annexure-i).

Graphite Crucible Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector