Get complete information related to latest Grindstone Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Grindstone Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Grindstone Tenders.
Tender For supply materials to the work site for the road from the main road of kashipura village to swamanna house in honnavalli gram panchayat, arakalgud taluk - air compressor (1 hour initial + 1 hour final) (honnavally/), water tanker 6 kl capacity (honnavally/), concrete jiont cutting machine for initial and final cuts (honnavally/), plate vibrator (honnavally/), screed vibrator (honnavally/), needle vibrator (honnavally/), concrete mixer 0.4/0.28 cum capacity (honnavally/), joint filler board 20mm thick as per is 1838 (4 x 3.75 x 0.200 equal 3 sqm) (honnavally/), plasticizer / super plasticizer (honnavally/), de-bonding strips 3.75 m (length) x 10 mm (width) x 5mm (thick) cut-out of rubber filler board or similar material including 5% wastage (honnavally/), bituminous sealant 800 ml per joint 23 joints (honnavally/), bitumen primer at 200 ml per joint for 23 joints (honnavally/), polythene sheet 125 mm micron (honnavally/), broken granite metal 10 mm (honnavally/), broken granite metal 20 mm (honnavally/), broken stone aggregate 40 mm size (honnavally/), coarse sand (zone iii) (honnavally/), portland cement (honnavally/), form work at 1% (honnavally/), caseii unsurfaced gravelled road) (495 t x 10 km) equal 4950 t-km add 10% of cost of carriage to cover cost of loading and unloading (honnavally/), tipper 5 cum capacity (honnavally/), water tanker (honnavally/), vibratory roller 8 tonne (honnavally/), paver finisher mechanical 100 tph capacity (honnavally/), front end loader 1 cum capacity (honnavally/), generator 100 kva (honnavally/), wet mix plant (pug mill) (honnavally/), water (honnavally/), grit / stone dust (honnavally/), aggreages 6 mm and below (honnavally/), coarse aggreages 12 mm (honnavally/), granite metal 20 mm (honnavally/), granite metal 40 mm (honnavally/), tractor - 40 hp (honnavally/)
Tender For supply of mgnrega - supplying common bunt clay bricks conventional size , supplying common bunt clay modular bricks 20x10x10 size , supplyion of 53 or 43 grade open on pipe cement of isi approved brand , supplying of fine sand on sie , supplying of corse sand on sie , providing and fixing 35 mm thick shutter for door and window and clear story window including anodised alluminium butt hinges with necessary screws.(a) indian teak wood.(ii)fully panelled , providing 25 mm thick for cupboards etc including black enamelledd m.s.butt hinges with necessary screws. partly panelled & partly glaged with iron hinges , providing and fixing glazed louvered glass window and ventilation with teak wodd frame 10 com x 7 cm size incl. 3 coat of oil painting to wood work etc. , supplying rough kota stone 25 mm thick , supplying of glazed times of 15 x 15 x 6 cm size or approve size , supplying of vitrified tiles 24 x 24 size antiskid , supplying of dry distember primer , supplying of distember primer , supplying of water proof cement paint , supplying of birla well care putty , supplying of plastic emulasion paints , suplying of indian type squating pan w.c. , supplying of urinol , supplying of upvc pipe (a)20 mm dia , supplying of upvc pipe (a)15 mm dia , supplying of upvc pipe (b) 32 mm dia , supplying of upvc pipe (b) 25 mm dia , supplying of 6 kg/ cm2 pvc pipe (c) 110 mm dia , supplying of 10 kg/ cm2 pvc pipe (c) 110 mm dia , supplying of 100 mm dia, 60cm long ston ware pipe , supplying of 160 mm dia upvc, pipe , supplying of brass screw down bib tap of 15 mm dia , supplyin of c i nahni trap , supplyin of pvc swr gully trap 160x110 , supplying of pvc water tank of approved make , supplying of 32 mm gun metal valve , c i cover with frame size 500/700 , c i cover with frame size 300/300 , supplying of tmt bars fe415 rinforcment for rcc work , supplying of stainless steel glosy asis 304 grade 1mm thick with over all size 610x460 mm and bowl size560x410x200 , supplying of 30 mm thick factory made solid panal pvc door stter , supplying of paver block mk 250 grade 60 mm thi , supplying of curve , supplying of np-2 non pressare pipe (a)150 mm dia , supplying of np-2 non pressare pipe (b)300 mm dia , supplying of np-2 non pressare pipe 450 mm dia , supplying of np-2 non pressare pipe (d)600 mm dia , supplying of np-2 non pressare pipe (e)900 mm dia , supplying of np-2 non pressare pipe (f)250 mm dia , supplying of np-3 non pressare pipe (b)300 mm dia , supplying of np-3 non pressare pipe (b)450 mm dia , supplying of np-3 non pressare pipe (b)600 mm dia , supplying of np-3 non pressare pipe (b)900 mm dia , supplying of 10mm aggregate , supplying of 20mm aggregate , supplying of 40mm to 63mm aggregate , supplying of stone dust , through and bond stone , supplying of rubble , supplyin of galvenised corrugated sheet 0.8 mm thic , gi j or l hook , supplying of galvenised mild steel tube 50 mm dia , steel work welded, in built up sections, framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint (a) in beams and joists, channels, angles, tees, flats with connecting plates or angle cleats as in main & cross beamnship & jack rafters, purlins connected to common rafters and like. , flat back wash basin color glazed 450x 300 size , providing and fixing extruded aluminium windos having extyuded aluminiyum colour anodized section
Tender For custom bid for services - provision of standby pump and associatedworks at main water supply pump house at af station samana-1. supply, installation and commissioning of submersible pump set 30 hp having discharge of 1650-500 lpm and head 47-78m electric driven 415 v, tp suitable open well (outlet size for 80*65mm dia) supply and install complete inclusive of 20 meter long 25 sqmm 3 core flat submersible cable, chain for supporting and taking out set mounting arrangement. nos 01, 2. supply, install, testing and commissioning and testing factory made and tested (including cpri type test certified) lt feeder pillar box (kiosk) outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 hz ac supply system, all as specified and directed, having bus bar chamber with insulated copper bus bars 350 amps rating installed on porcelain insulators. the panel shall be dust and vermin proof, made of 3.15mm crca ms sheet 75mm x 30mm thick ms channel frame, duly powder coated finish. front opening type with aprons for cable entry with double door shitter and locking arrangement, danger plate and earthing terminal. the scope of work includes pcc foundation and provision of the following :- incoming (a) mccb 4 pole 200 amps, 36 ka, 415 v - 01 nos (b) bus bar aluminum strip 400 amp, 4 pole, for in comp supply - 01 nos (c) digital panel meter including cts - 01 no outgoing (a) mcb tpn 40 amp 6 ka, 415 v 50 hz - 02 nos (b) mccb tpn 80 amp 16 ka, 415 v 50 hz - 01 no (c) star delta starter panel with suitable thermal overload protection, sppr, overvoltage, overcurrent and surge protection for 30 hp - 02 nos (d) low water level motor cutoff sensor with wire 20 mtr - 02 nos (make gic or slect control pvt ltd.). each 01, 3. supply and fix pressure guage upto pn-40 rating all as specified and as directed by engineer-in-charge. each 10, 4. supply and fixing hdpe pipe 90 mm dia pn 16 pressure rating with connected items all as specified and as directed by engineer-in-charge. rm 15, 5. supply and fix, gi sluice valve confirming to is 13095, 100 mm (4 ) dia with flanges end v all as specified and directed by engineer-in-charge., 6. material and labour in replacement for construction of valve chamber of size 1200 x 900 x 900 mm deep dimensions (over all internal dimension) for sluice valve etc. with pcc foundation, pcc block masonry walls, plastering, pcc coping, white washing, mild steel chamber cover, painting to chamber cover including excavation and earth work in any type of soil complete all as specified below :- valve chamber shall be provided with the following specifications :- (i) cement concrete for foundation (1:4:8) type d2 using 40mm graded stone aggregate 150mm thick extended upto 150 mm beyond the outer face of block masonry. (ii) walls of valve chamber 200 mm thick with precast cement concrete (1:5:8) (using 20 mm graded stone aggregate) solid building blocks, setting in cm 1:6 complete. (iii) internal and exposed surfaces of valve chamber both concrete and block masonry surface shall be plastered with cm 1:4 15 mm thick finished even and smooth. (iv) 50 mm thick coping in pcc 1:3:6 type c1 over block masonry wall. (v) entire plastered surfaces shall be treated with 3 coats of white wash. (vi) chamber cover shall be of 6 mm thick fiber reinforced polymer (frp) sheet with 30 x 30 x 5 mm size angle iron frame with hold fast and locking arrangement. steel furface shall be painted with two coats of synthetic paint of first quality over one coat of red oxide primer. each 01, 7. supply and fix 100 mm non return valve conforming to is 13095, 100 mm (4 ) dia with flanges end all as specified and directed. each 02, 8. supply and fix galvanized iron heavy grade pn 16 rating y section with flanged end 2 openings 100 mm dia and one 180 mm dia with suitable flanges and bots flanges end v all as specified and directed. kg 25-msme exemption - yes | startup exemption - yes
Tender For special repair to nuagada to keradango for the year 2024-25 - clearing grass and shrub jungle and uprooting stumps and small bushes and tree below 0.3m(1 -0 ) girth on premeasurement removal of rubbish on both sides of the road to facilitate widening of berms, disposal of the stuff including all labour, t&p, cess, articles required for the work etc. complete and direction of the engineer-in-charge., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam irc grade-iii (53mm to 22.4mm) specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming with stone crusher dust to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per technical specification clause 404 of mord by manual means including all labour, t&p and cost, conveyance, royality, dmf (10% over royality), emf (5% over royality), addl charges, cess & taxes of all materials required for the work complete in all respect as per direction of the engineer-in-charge., providing & applying tack coat with bitumen emulsion (rs-1) using emulsion distributor @ 2 kg per 10 sqm on the bituminous surface and cleaned with mechnial broom as per technical specification clause 503 of mord & as per direction of engineer-in-charge., providing & applying tack coat with bitumen emulsion (rs-1) using emulsion distributor @ 4 kg per 10 sqm on the prepared granular surface treated with primer and cleaned with mechnial broom as per technical specification clause 503 of mord & as per direction of engineer-in-charge., providing & laying 20mm thick premix carpet using 0.18 cum of 13.2 mm and 0.09 cum of 11.2 mm size chips for 10sqm on road surface using 14.60 kg. penetration grade of bitumen (60/70) for 10 sqm over the prepared surface including hand packing to proper camber and consolidation with prr inclusive of hire and running charges of prr, bitumen mixtures, tar boilers and all other t&p articles and also including cost conveyance royalty, dmf (10% over royality), emf (5% over royality), addl charges, with cost of all labour charges & cess etc complete as per specification and direction of the engineer-in-charge, providing and laying 6mm thick pre-coated seal coat type b using 0.06 cum of 6.7 mmsize h.b.g. chips and down graded as per sieve analysis per 10 sqmand 6.8 kg ofbitumen(60/70) for 10 sqm on the road surface area & rolling with prrincluding hire and running charges of prr and all othermachineries, cost, conveyance & royality, dmf (10% over royality), emf (5% over royality), addl charges, of 6mm size hard black granite chips with all labour, t&p and cess required for the work etc complete as per specification & direction of engineer-in-charge., construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & clause 305 of mosrt&h specifications for road and bridge works (4th revision) with cost of all labour, t&p and with cess, royality dmf (10% over royality), emf (5% over royalityand as per direction of engineer-in-charge.
Tender For transporting after dismantling and removing of sand stone bricks and coal dust debris from 3 nos of old used and idle lancashire boiler from hurladih colliery ( p.b. area) to amal. joyrampur colliery under lodna area .