Web Analytics Made Easy - StatCounter

Gritty Tenders

Get complete information related to latest Gritty Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Gritty Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Gritty Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :39581288 Due date: 20 Mar, 202520 Mar, 2025 10.64 Lacs
Tender For supplying of materials for sajivini shed in agrahara lakshmi pura grama gonibidu gp - portland cementqnt, dry distemperqnt, plastic emulsion paintqnt, coarse sandqnt, water proofing materialsqnt, pvc edge beadingqnt, display board qnt, plasticizer super plasticizer qnt, binding wire qnt, c i manhole cover with frame qnt, table moulded bricks of class designation 50 qnt, border tiles 30 x qnt0 cms qnt, m s rods qnt, polyenthylene water storage tank of specified capacity l qnt, glazed tiles 300x450 qnt, alluminium handles qnt5 mm qnt, alluminium tower bolt 20 cm qnt, aluminium window frame section qnt 20 mm thick qnt, bond stone 20 x 20 x 45 cm qnt, boulders qnt, brass stop cock qnt, broken stone aggregate qnt2 mm to qnt0 mm size qnt, broken stone aggregate 20 mm size qnt, broken stone aggregate 40 mm size qnt, burnt bricks class 35 qnt, cp brass chain with plug qnt, cp brass waste 32 mm of standard pattern qnt, casurina poles qnt00 qnt50mm qnt, casurina poles 75 qnt00mm dia, ceramic tiles of size qnt 30 x 30 cms, chrominum plated screws qnt, cleat angles qnt, corbon electrodes qnt, enamel metal paint qnt, granite metal 20 mm qnt, granite metal 40 mm qnt, granite trap broken metal qnt00 mm and down size qnt, honne wood qnt, honnewood planks for panels 20 mm thick qnt, jungle wood runners and planks qnt, lead or pvc connection pipe 32mm dia for wash basin qnt, mangalore tiles first class and special tile for ridges and hips qnt, mathi nandi wood planks for panels 25 mm thick qnt, nylon rollers qnt, ready mix primer paint ready mix red lead paint qnt, rubber beading for shutters beading qnt, silver oak or equivalent planks 38 mm thick qnt, size stone 20 x 20 x 25 cms qnt, tmt bars fe 500 qnt, whitening qnt, mr9609 add qnt, c i m s brackets for flushing cistern qnt, brick bats 25 to qnt00 mm qnt, unit cost as per the specification qnt, ms flat qnt, bolts and nuts qnt, rcc cap qnt000 mm diaqnt00 mm thick qnt, anchor bolts 750mm qnt, base plate base plate qnt, brick bats 25 to qnt00 mm qntqnt, copper plated brass piller tap qnt5mm qnt, gusset plates 6 mm thick qnt, ms angle iron 40mm x 40mm x 6mm 23 metre in length at 3 5 kgs per metre qnt, ms angle iron 50mm x 50mm x 6mm 33 8 metre in length at 4.5 kgs per metre qnt, vitrified tiles 600x600 mm qnt, white vitreous china clay flat back wash basin size 630x450mm qnt, indian type water closet of size 580 mm of specified make with footrests qnt, cost of 6 5mm m s coil qnt, fabrication charges qnt , pvc pipe of 4kgs cum 63mm qnt, ser1 labour charges for lifting and placing in position and making connection at 7 on material ser1, ser1 handling loading and unloading 3 on material ser1, ser1 fabricator ser1, ser1 fitter class i ser1, ser1 welder grade i ser1, ser2 add brush putty sand paper roller at 5 on cost of paint ser2, ser1 add cutting and other wastage 5 ser1, ser2 add handling loading and unloading at 1 on material ser2, ser2 add handling loading and unloading at 2 on material ser2, ser2 add hom of welding and grinding machine 2 on material ser2, ser2 add hom of welding and grinding machine 4 on material ser2, ser1 add providing and removing scaffolding at 3 on labour ser1, ser1 add sundries charges at 1 on material ser1, ser1 add sundries charges at 2 on material ser1, ser1 add watering charges at 1 on material ser1, ser2 add watering charges at 2 on material ser2, ser2 tools & plants and electrical charges 2 ser2, ser2 transportation charges of materials beyond 5 km10 ser2, ser1 labour charges for handing errection of rcc rings etc ser1, ser1 stone chistler class ii ser1, ser1 painter class i ser1, ser1 mason class ii with tools ser1, ser1 mason class i with tools ser1, ser1 hom of cutting and grinding machine ser1, ser2 hom of vibrator 0 71 days ser2, ser1 hom of welding and grinding machine ser1, ser1 mixer concrete small used in culvert ser1, ser1 mixer concrete 1 cum capacity ser1, ser1 licenced plumber with tools ser1, qnt50 mm thick plain glass

CTN :39543982 Due date: 10 Mar, 202510 Mar, 2025 1.37 Crore
Tender For mr-n- 19-20 pupri-09 - choraut bazar to purandih, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of panel concrete, plain cement concrete pavement, thickness as per design over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501, kilometre stone :- reinforc

State Government

CTN :39243401 Due date: 11 Mar, 202511 Mar, 2025 38.30 Lacs
Tender For corrigendum : various seasonal arrangements for the year 2025 26 for market committee makhu - various seasonal arrangements for the year 2025 26 in various mandis under the notified area of market committee makhu, making 50mm x 50mm furrows on existing road surface, dismantling stone pitching or soling (stone pitching dry) csr 8.2a, dismantling of existing brick on end edging complete in all respect as per pwd specifications., providing and laying of brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per punjab pwd specifications., relaying of recovered material obtained from dismantling of road crust as construction of granular sub-base by providing coarse graded material grading-ii sopreading in uniform layers with motor grader on prepared surface, mising by mix by mix in place method with rotavator at omc, and compacting with vibratory roller to achive the desired density, complete as per technical clause 401 o morth&h specifications, compacting dismentled stone aggregates of grading ii to water bound macadam specification,rolling with smooth wheeled roller 8- 10 tonnes complete as per technical, water bound macadam grading ii (csr 24.13 ii) providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, complete as per technical clause 404 of mort&h specifications without screeening., water bound macadam grading iii providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming water bound macadam grading ii requisite type of binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete a, providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder vg-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 510 of mort&h specifications, credit of materials (from raising & strengthening) bricks, credit of materials (from raising & strengthening) bricks bats, providing and applying tack coat with penetration grade bitumen vg-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of mort&h specifications (csr 24.18 b), providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a batch type hot mix plant with bituminous binder vg-10 @ 1.46kg per sqm, laid with paver and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 511 of mort&h specifications. including carriage of mixed material plant to site of work, providing and laying of premix sand seal coat premixed in batch type hot mix plant using specified fine aggregates and penetration grade bitumen vg-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 513 of mort&h specifications. including carriage of mixed material plant to site of work., earth work excavation in ordinary soil, kassi work undressed involving an avarage horizontal throw upto 2.00 meters and an avarage vertical lift upto 0.50 metre incincluding breaking of cloadsas ., cautionary sign board 600x600x600mm triangular as per irc 67-2001 with retro reflective h

CTN :39413928 Due date: 06 Mar, 202506 Mar, 2025 9.34 Lacs
Tender For corrigendum : e-tender for the open gym for women at malappuram - etender for the open gym for women at malappuramfor more details refer tender documents, leg press, shoulder builder, air walker, bench with fixed weight, chest cum seated puller, rower, leg extension, interlocking paver block :- providing and laying 60mm thick faciory made cement concrete interlocking paver block of m -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints withline sand etc. all complete as perthe direction of engineer-in-charge. (l 24m , w 3m), solid block :- solid block masonry using precast solidblocks(factory made) of size 40x20x15 or nearest available (kerb), cement plaster :- 12mm cement plaster of mix 1:4 (1cement:4 fine sand), cement concrete :- providing and laying in position specified grade of reinforced cement concrete (leg concrete), excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:2:4 ( 1 cement : 2 coarsesand : 4 graded stoneaggregate 20 mm nominal size), granular sub base:- providing and laying granular sub base 25mm to 4.75mm, gravel stone aggregate of size 4.75 and down @10.0%, local finesand@18.0%

CTN :39511213 Due date: 07 Mar, 202507 Mar, 2025 7.66 Lacs
Tender For supply of materials for the development of ground for behind higher primary school of chippalakatti village. - mason (brick layer) ist class.,., fitter(grade1).,., carpenter 2nd class.,., mason (brick layer )2nd class.,., burnt bricks class 35 (non modular).,, casurina poles 100 - 150 mm.,, casurina poles 75 - 100 mm dia., jungle wood runners and plank.,, silver oak, or equivalent planks 38 mm thick.,, binding wire,., tmt bars fe 500,., hom of vibrator 0.71 days.,, super plasticizer admixture is marked as per 9-103-1999.,, cudddapah slab 4 cm thick/shahabad/thandur blue., enamel metal paint.,, painter class i.,, ready mix primer paint (ready mix red lead paint)., hom of cutting and grinding machine.,, add,, corbon electrodes.,, anchor bolts 750mm.,, base plate/ base plate, gusset plates 6 mm thick., ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre,., ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at4.5 kg per metre, unit cost as per the specification,, mason class i (with tools),, mixer (concrete small used in culvert.), boulders.,, bond stone 20 x 20 x 45 cm.,, size stone 20 x 20 x 25 cms.,, broken stone aggregate 40 mm size,, hom of welding and grinding machine.,, hom of cutting and grinding machine-1., mechanic class ii / mechanic hmp grade i/eme grade, welder grade 1., anticorrosive bituminous paint black), ball bearing hinges duty, cast iron spike.,, ms plates 40 x 6 mm.,, the 36 mm x 6mm ms plates, ms plate 12 mm x 6 mm, the 50 mm dia ms hollow pipe b class 14 gauge, mixer (concrete) - 1 cum capacity.,, mason class ii (with tools).,., portland cement,., coarse sand (zone iii),, broken stone aggregate 12 mm to 10 mm size,, broken stone aggregate 20 mm size,, vibratory roller 8 tonne,., water tanker,, gravel 2.36 mm/murrum,, water.,.

CTN :39491742 Due date: 07 Mar, 202507 Mar, 2025 33.31 Lacs
Tender For gsb wbm work ward no. 26 to 55, dausa. - providing, laying, spreading and compacting of granular sub-base by providing close graded material (table 400-1), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion., grading - iii material, coarse graded granular sub-base material 53 mm to 26 .5mm, carriage of materials (by mechanical means) stone, boulders, gravelly material 5 km, dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto 50m and lift upto 1.5 m., construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per mort&h specification clause 305. (lead taken upto 5 km), random rubble masonry with hard stone in foundation and plinth : cement mortar 1:6 (1 cement : 6 coarse sand), providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)drain work, providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level :1:4:8 (1 cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size)., providing at site, lowering & laying in trenches, aligning & jointing of rcc pipes np3 class (with s/s ends) is: 458 - 1988 (amended up to date) marked and pipes from 300 mm upto 2000 mm manufactured through vertical / vibrated casting process all levels with rubber gaskets (epdm/sbr) for sewer lines as per is: 5382 (including cost of rubber gaskets lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as directed by engineer. note : e/w to be measured and paid separately. length of pipe shall be measured in between the outer wall of two manholes / inspection chambers. pipe in the manhole/inspection chamber s wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable., 450 mm internal diameter, 600 mm internal diameter, hydraulic excavator of 1 cum bucket (with deasel, driver & helper)

CTN :39361666 Due date: 03 Mar, 202503 Mar, 2025 50.00 Lacs
Tender For w no 14 different works-, earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per mort&h specification clause 301.in all type of soil, carriage of materials bymechanical transport including loading,unloading and stacking :: earth for 1 km, providing and laying lean cement concrete 1:4:8 in sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length onstruction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid manualy, ompacting with surface vibrator, finishing and curing complete as per clause 601, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion., providing and laying un-reinforced, plain cement concrete mix with concrete mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints etc including all material, labour, machinery, lighting, guarding and maintenance of diversion. 9.6.1 pcc m-20, providing, lowering, laying in trenches, aligning, fixing in position and jointing socketed rubber gasket type isi marked upvc pipes of class iii (6 kg/sqcm) suitable for potable water with rubber ring joints (as per is 4985-2000) of following outer dia with all accessories (excluding specials) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer., providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in-charge. exposed on wall 20 mm nominal outer dia .pipes., earth work in excavation in foundation, trenches etc. includingdressing of sides and ramming of bottoms, including getting out theexcavated material, refilling after laying pipe/ foundation anddisposal of surplus excavated material at a lead upto 50m suitablesite as per direction of engineer for following depths, below naturalground / road top level. in all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. depth upto 1.5 m, carriage of materials bymechanical transport including loading,unloading and stacking :: earth for 1 km, providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level code) 1:4:8 (1 cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size)., "providing and laying in position cement concrete of specified gradeexcluding the cost of centring and shutteringt - all work upto plinth level1:1:3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20mm nominal size)", 40 mm thick fine dressed stone flooring over 20 mm (average) thickbase of cement mortar 1:5 (1 cement : 5 coarse sand) includingpointing with cement mortar 1:2 (1 cement : 2 stone dust) with anadmixture of pigment to match the shade of stone.30.27.1 red sand stone, providing and fixing of reinforced ferro-cement drain covers designed for 'a' class loading duly marked on co

State Government

CTN :39243441 Due date: 04 Mar, 202504 Mar, 2025 30.15 Lacs
Tender For corrigendum : various seasonal arrangements for the year 2025 26 for market committee panje ke uttar - various seasonal arrangements for the year 2025 26 in various mandis under the notified area of market committee panje ke uttar, making 50mm x 50mm furrows on existing road surface, dismantling stone pitching or soling (stone pitching dry) csr 8.2a, dismantling of existing brick on end edging complete in all respect as per pwd specifications., providing and laying of brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per punjab pwd specifications., relaying of recovered material obtained from dismantling of road crust as construction of granular sub-base by providing coarse graded material grading-ii sopreading in uniform layers with motor grader on prepared surface, mising by mix by mix in place method with rotavator at omc, and compacting with vibratory roller to achive the desired density, complete as per technical clause 401 o morth&h specifications, compacting dismentled stone aggregates of grading ii to water bound macadam specification,rolling with smooth wheeled roller 8- 10 tonnes complete as per technical, water bound macadam grading ii (csr 24.13 ii) providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, complete as per technical clause 404 of mort&h specifications without screeening., water bound macadam grading iii providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming water bound macadam grading ii requisite type of binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete a, providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder vg-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 510 of mort&h specifications, credit of materials (from raising & strengthening) bricks, credit of materials (from raising & strengthening) bricks bats, providing and applying tack coat with penetration grade bitumen vg-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of mort&h specifications (csr 24.18 b), providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a batch type hot mix plant with bituminous binder vg-10 @ 1.46kg per sqm, laid with paver and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 511 of mort&h specifications. including carriage of mixed material plant to site of work, providing and laying of premix sand seal coat premixed in batch type hot mix plant using specified fine aggregates and penetration grade bitumen vg-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 513 of mort&h specifications. including carriage of mixed material plant to site of work., earth work excavation in ordinary soil, kassi work undressed involving an avarage horizontal throw upto 2.00 meters and an avarage vertical lift upto 0.50 metre incincluding breaking of cloadsas ., cautionary sign board 600x600x600mm triangular as per irc 67-2001 with

State Government

CTN :39243444 Due date: 04 Mar, 202504 Mar, 2025 68.50 Lacs
Tender For corrigendum : various seasonal arrangements for the year 2025 26 for market committee ferozepur cantt - various seasonal arrangements for the year 2025 26 in various mandis under the notified area of market committee ferozepur cantt, making 50mm x 50mm furrows on existing road surface, dismantling stone pitching or soling (stone pitching dry) csr 8.2a, dismantling of existing brick on end edging complete in all respect as per pwd specifications., providing and laying of brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per punjab pwd specifications., relaying of recovered material obtained from dismantling of road crust as construction of granular sub-base by providing coarse graded material grading-ii sopreading in uniform layers with motor grader on prepared surface, mising by mix by mix in place method with rotavator at omc, and compacting with vibratory roller to achive the desired density, complete as per technical clause 401 o morth&h specifications, compacting dismentled stone aggregates of grading ii to water bound macadam specification,rolling with smooth wheeled roller 8- 10 tonnes complete as per technical, water bound macadam grading ii (csr 24.13 ii) providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, complete as per technical clause 404 of mort&h specifications without screeening., water bound macadam grading iii providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming water bound macadam grading ii requisite type of binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete a, providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder vg-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 510 of mort&h specifications, credit of materials (from raising & strengthening) bricks, credit of materials (from raising & strengthening) bricks bats, providing and applying tack coat with penetration grade bitumen vg-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of mort&h specifications (csr 24.18 b), providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a batch type hot mix plant with bituminous binder vg-10 @ 1.46kg per sqm, laid with paver and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 511 of mort&h specifications. including carriage of mixed material plant to site of work, providing and laying of premix sand seal coat premixed in batch type hot mix plant using specified fine aggregates and penetration grade bitumen vg-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 513 of mort&h specifications. including carriage of mixed material plant to site of work., earth work excavation in ordinary soil, kassi work undressed involving an avarage horizontal throw upto 2.00 meters and an avarage vertical lift upto 0.50 metre incincluding breaking of cloadsas ., cautionary sign board 600x600x600mm triangular as per irc 67-2001 wit

CTN :39487539 Due date: 04 Mar, 202504 Mar, 2025 33.31 Lacs
Tender For gsb & wbm work ward no. 26 to 55, dausa.-, providing, laying, spreading and compacting of granular sub-base by providing close graded maternal (table 400-1), spreading in uniform layers with motor grader on prepared surface, mixing by max in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion, , grading-iii maternal, , coarse graded granular sub-base material 53 mm to 26.5mm, , carriage of materials (by mechanical means) stone, boulders, gravelly material 5 km, , dressing of earth work in surface excavation including cutting and filling upto 30cm depth mcluding disposal of excavated earth upto som and lift upto 15 m, , construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per mort&h specification clause 305 (lead taken upto 5 km), , random rubble masonry with hard stone in foundation and plinth cement mortar 16 (1 cement 6 coarse sand), , providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level 124 (1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size), , drain work, , providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level, , 148 (1 cement 4 fine/coarse sand 8 graded stone aggregate 40 mm nominal size), , providing at site, lowering & laying in trenches, aligning & jointing of rcc pipes np3 class (with s/s ends) is. 458-1988 (amended up to date) marked and pipes from 300 mm upto 2000 mm manufactured through vertical / vibrated casting process all levels with rubber gaskets (epdm/sbr) for sewer lines as per is 5382 (including cost of rubber gaskets lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as directed by engineer note e/w to be measured and paid separately length of pipe shall be measured in between the outer wall of two manholes /inspection chambers. pipe in the manhole/inspection chamber's wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable., , 450 mm internal diameter, , 600 mm internal diameter, , hydraulic excavator of i cum bucket (with deasel, driver & helper)
 Loading, Please wait...

Connect us via What's Up