Latest guy rod Tenders | Government guy rod Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38568790

23 Dec, 2024 NA

Ghaziabad - Uttar Pradesh

Tender For supply of 25 kv earthing/discharge rod with working voltage 25 kv ac traction to rdso s pecification no.eti/ohe/51(9/87) with latest a and c slip no.-1(10/92) each discharge rod is to be supplied with 02 nos.rail clamps,the top clamps suitable for 10,12 mm dia.coductor 01 no. each and cable 7.5,1.5 mtr (i.e,total 9 mtr)whole assembly to be supplied in a canvas bag. [ w arranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38570752

26 Dec, 2024 4.04 Lacs

Mangalore - Karnataka

Tender For providing surge/earthing protection system to chairman bungalow - providing external lightning protection(elp) - supply & installations with:a) 800mm-8mmair termination spike with accessories.b) parallel connector stst (v4a) for rod 7-10mm.c) 8mm round conductor big holder at metal sheet roof, 3mtr,16mm/10mm almgsi air termination rod with accessories-supply & installations with:a) 1mtr,10mmair termination rodb) rod clamp for connecting air termination rods(stst for rod 8-10/rd16mm fsk8.1016skm10x25-v2a)c) 2mtr,16mm almgsi chamfered on both ends air termination rodd) concrete337 circular base 17kg(for air termination rods d-10mm/16mm)e) plastic flat washer d-370mm black for concrete bases-17kgf) connecting clamp for air terminal to roof conductor, 8mm aluminium-magnesium alloy round conductor-rd8/almgsi-with ss holder-supply& installations:a) 8mm aluminium-magnesium alloy round conductor-rd8/almgsi, supply & installation:-8mm round conductor ss holder, supply & installation -8mmround conductor holder for wall& parapet stst with cover plate, supply & installation 8mm round conductor holder-fate roof tile, supply & installation 8mm round conductor holder-tile ridge, supply & installation of connecting sleeve (zdc for rd 8mm with 4 screws m6x10mm), supply & installation of universal cross connector stst, supply & installation of test clamp-round conductor to strip connection, supply & installation of stainless steel 10mm earth conductor, supply & installation of universal cross connector stst, supply & installation of 3mtr,17.2mm copper bonded (ul listed) earth rod with backfill material & accessoriesa)copper bonded (ul listed) earth rod 17.2mm dis, 3000mmlong, 250 micron - 1rodb) terra 20kg fulgurites free backfill material-1bagc) stainless steel earth rod connecting clamp-ss316-1clampd) rcc earth pit chamber 340mmx340mm (frame & cover)-1no, supply & installation of surge protection device(spd)reputed makea) vap dva csp3p100fm combined lightning current &surge arrestor type 1+ type 2 (3ph+n circuit)-installation place: main eb incoming).b) ngate-dga gfftv-combined arrestor: installation place-cable/sattv

State Government

CTN :37879327

23 Dec, 2024 NA

Rajkot - Gujarat

Tender For corrigendum : purchase of (1) various type of earthing rod (2) do operating rod

CTN :38497470

21 Dec, 2024 NA

Kasganj - Uttar Pradesh

Tender For corrigendum : the work of supply & erection/installation of tail less unit, d.o. fuse set, boots and sleeves & diffrent types of material use in dtr protection (bp 2024-25 phase-ii) edd i & edd (rural) kasganj under the juridiction of edc, kasganj on semi turn-key basis. - supply of material by the contractor, do fuse set, m.s. top channel (125x65x2240 mm.), holding clamps for ms top channel, tail less unit 500a/650v with fitting suitable for pcc/stp pole., nut, bolt & washer, m.s. angel with clamp and nut & bolt, m.s. earthing with earth rod as per respo norms, boots & sleeves, al lugs 120 sq.mm, distribution panel box no.2 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-750 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., distribution panel box no.3 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-1400 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., safe carriage of following/ any other material from electricity store center soron/etah/aligarh to pit site of work from the kaccha & pakka road including loading & unloading at the respective ends including the cost of arrangement of labour, t&p etc. which required for topper completion of work., lt xlpe cable al. 1x120 sq.mm., acsr weasel conductor for jumpering, erection of material, erecetion/installation of d.o. fuse set, fixing of m.s. top channel (125x65x2240 mm.) with all accessories., foundation of distribution panel box no.2 circuitwith fixing arrangement & replacement of cable with lugs., foundation of distribution panel box no.3 circuitwith fixing arrangement & replacement of cable with lugs., fixing of tail less unit 500a/650v with fitting suitable arrangement like bus bar etc. for pcc/stp pole., erection of m.s. earthing with earth rod as per respo norms.

State Government

CTN :37480288

21 Dec, 2024 3.00 Lacs

Surendranagar - Gujarat

Tender For corrigendum : supply of do rod, earthing rod & hand-gloves under dhrangadhra division office.

State Government

CTN :38021962

30 Dec, 2024 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of earthing rod as per is 3043

Central Government/Public Sector

CTN :38567758

23 Dec, 2024 NA

Kollam - Kerala

Tender For guy rod (25mm)9.70 mtrs, long galvanized, ri no.5004, specification no. ti/spc/ohe/fitting s/0130 with slip no. 1, eti/ohe/13 (4-84) may 2018, ti/spc/ohe/ fittings/0130-10/13 rev -1 or latest and dr awing no. eti/ohe/p/5004/5/6-1 rev-g. warranty period: 30 month(s) from the date of supply. [ warranty period: 30 months after the date of delivery ]

CTN :38566937

19 Dec, 2024 2.41 Crore

Jaipur - Rajasthan

Tender For fibre glass operating rod with earthing conductor (lead) &amp with / without tree pruner

CTN :38526292

08 Jan, 2025 39.38 Crore

Jaipur - Rajasthan

Tender For segregation of 11 kv mixed feeders at tonk circles of jaipur discom of rajasthan state under revamped reforms-based and results linked distribution sector scheme (rdss) on turnkey basis against tn-583 - pcc poles, pcc pole 9 mtrs long (400 kg), pcc pole 9 mtrs long (200 kg), outdoor 11 kv o/d vcb kiosk complete with accessories including use of special tools, armoured cable of size 2c x 4 sq.mm. 1100 volts pvc insulated including supplyof ferrules, control cable of size 12c x 2.5 sq.mm. 1100 volts pvc insulated including supply of ferrules, overhead steel cored aluminum acsr dog[100sqmm(6+7) /(4.72+1.57)] conductor complete in all respect as per latest specification and drawing, overhead steel cored aluminum acsr rabbit conductor in all respect, earthing rod sets for s/s made with ms rod (galvanized ) 20 mm dia, 3 meter length with gi wire and clamp as per latest specification and drawing adopted & approved by nigam., ctpt structure set (galvanized), 11kv ct pt set(200/5 amp.), mip meter box for meter with ttb, go double break without eb isolator on existing bracket complete in all respect as required including hardware, nut, bolts & washer etc., 11kv ( with 9 x 24 kv post insulator ) 400 amp., horn gap sets on existing brackets in all respect as required including hardware nut & bolt & washer etc., 11kv ( with 6 x 24 kv post insulator ) 1 set=3 nos, supply of insulators, 11kv porcelain disc.insulators b&s type 45kn, hardware for 11kv disc insulator b&s type 45kn, composite polymer insulators, 11kv polymer disc.insulators t&c type 45kn, hardware for 11kv disc insulator t&c type 45kn, 11 kv composite polymer pin insulator complete in all respect, pg clamps for suitable acsr dog conductor, pg clamps for suitable acsr rabbit conductor, 11 kv danger plate of size 200 x 250 mm complete in all respect, supply of angle and channel, m.s channel 100x50x6 mm, m.s channel 75x40x6 mm, m.s. flat 50 x 6 mm (galvanized), 1.4 mtr channel bracket with clamp, supply of lightening arrestors, substation type 9kv, 10ka station class (1set=3 nos.) lightening arrestors., 11kv double pole line structure set for cut point complete on existing poles in all respect with clamp, as required made from m.s.channel 100 x 50 x ismc ( 9.56 kg. per mtr.) isa m.s.angle 65 x 65 x 6 mm, m.s.angle 50 x 50 x 6 mm and m.s.flat 50 x 6 mm (galvanized as per is), gi stay set (galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300x300x4 mm,12 mm dia turn buckle) including stay clamps,, strain/guy insulator for stay set, 7/10 swg gi stay wire, gi wire 8swg, underground cable for working voltage of 11kv aluminium conductor (is 7098) cable xlpe armoured, under ground cable of size 3x185 sq.mm for 11 kv, g.i. pipe of 125 mm diameter, b-class (is:1239 mark), gi pipe for cable support at pole ( each 3.3 mtr ), cable for11 kv aluminum conductor xlpe armoured ht cable, xlpe 3x185 sq.mm h.s. on indoor type, xlpe 3x185 sq.mm h.s. on outdoor type, xlpe 3x185 sq.mm h.s.s.t. joint, 11.4 mtr. long lattice tower made of 50 x 50 x 6 mm m.s. angle with 50 x 6 mm m.s. flat for bracing as per nigam specification, 11kv cross arm with top hamper with clamps made of ms angle 65x65x6mm, clamp 50x6 mm, earth clamp 50x6 mm (galvanized), fixing of 11/0.4 kv substation structure set for three phase 63 kva transformer on double poles in all respect. weight (as per specification and drawing with go channel) approx=219.54 kg (all galvanized as per relevant is), 11 /0.4 kv al wound, three phase distribution transformer (completely self protected with provision of lt bushing box), 25 kva, 63 kva, 6.35/0.24kv s/s structure set for single phase transformer on single 9mtr, 400kg pcc pole in all respects., 11kv 100 amp drop out cum isolator with 3.0 amp. fuse & 12 kv post insulators., lt xlpe cable, size 4cx70 sq. mm, size 4cx120 sq. mm, aerial bunched cable, aerial bunched cable 3cx25+1x25 sqmm, aerial bunched cable 3cx50+1x35 sqmm, lt distribution pillar

Guy Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government

Central Government/Public Sector