Latest handling machine Tenders | Government handling machine Tenders

Central Government/Public Sector

CTN :39644102

31 Mar, 2025 77.84 Lacs

Kollam - Kerala

Tender For maintenance painting steel structural of hup buildings(old and new) for the year 2024-25 - painting the steel structural works such as columns, trusses, purlins, tie beams, bracings, vg clamps, grattings etc with two coat enamel paint (two different colours) over a coat of marine primer of approved quality after through surface preparation at all heights & levels including all cost and conveyance of materials, labour charges, loading unloading charges, hire charges for tools and plants, providing necessary scaffolding & covered of machinery with tarpalin , etc complete as per standard specification. (paint make: berger/ asian/nerolac/ ici or equivalent make ) (all the materials, tools & plants, tarpaulin etc required for the above shall be supplied by the contractor), supply fabrication and erection of steel structures by welded or bolted in built up /single sections for trusses, latice beams , purlins,ties, bracings etc for repair/maintenance/petty new works with ms angles, chanels, joists,plates etc including conveyance of all materials, loading & unloading charges, all labour charges, cost of consumables, applying one coat of marine primer , hire charges for tools and plants,providing temporary support for adjoining structures, dismantling and removing damaged structures etc complete as per standard specification. ( ms items vizaku, jindal,sale , tata or equivalent make with isi mark), supplying and fixing ac corrugated roofing / side clading sheet fixed with suitable size zinc phosphated galvanised and polymer coated j or l bolts and nuts and washers with necessarty overlap of 150mm at ends including cost and conveyance of all materials, loading & unloading charges, all labour charges, hire charges for tools and plants, dismantling and removing existing damaged roof sheets, dismantling and replacing the sheets of nearest bay for easiness of the work if necessary, providing necessary scaffolding / safety arrangement equipments for the work etc complete as per standard specification. (ac sheet make: everest/ ramco or equivalent with isi mark and roof bolts aargee/ katalyst make), supplying and fixing poly carbonate fully corrugated sheet clear / uv stabilised diffuser type having minimum thickness 1.80 mm with width of 1050 mm & length of 3.00 m to suit with fully corrugated asbestos cement roofing sheet for roof & side clading, fixed with suitable size zinc phosphated galvanised and polymer coated j or l bolts, nuts & washers with necessarty overlap of 150mm at ends including cost & conveyance of all materials , loading & unloading charges, all labour charges, hire charges for tools and plants, dismantling and removing existing damaged roof/ side clading sheets, providing necessary scaffolding / safety arrangement equipments for the work etc complete as per standard specification. (polycarbonite sheet make lotus/everest/tufflite), supplying and fixing ac corrugated ridge with zinc phosphated galvanised and polymer coated j or l bolts, nuts, washer & cap at all heights and levels including cost and,conveyance of all materials, loading & unloading charges ,all labour charges, hire charges for tools and plants, providing necessary scaffolding/ safety arrangement equipments for the work etc complete as per standard specification. (ac corrugated ridge make:- everest, vishka, ramco make ), mssupplying and fixing of moulded / pultruded frp grttings panel using isophthailic fire retardent grade resin, grattings shuld be square mesh size 35-50mm, height / depth 35- 50mm, rib thickness 5-8 mm with necessary accessories like ss clamps with nuts & bolts of pannel size 1000mm x 1000 mm including cost and conveyance of materials, loading unloading charges, hire charges for tools & plants, dismantling and removing damaged gi gratings , making nearest structures to suit for fixing new gratings, etc.complete as per standard specifications, supply and fixing zinc phosphated galvanised a

CTN :39641064

31 Mar, 2025 NA

Raigad - Maharashtra

Tender For providing of handling and transport on lumpsum basis - loading transport and unloading of plant and machinery from ongc uran plant

CTN :39643329

07 Apr, 2025 NA

Shimla - Himachal Pradesh

Tender For procurement of machinery and equipment on behalf of national health mission - ot table, anaesthesia work station, defibrillator, phototherapy unit, x-ray mobile, x-ray machine 500 ma, x-ray machine 300 ma, colour doppler ultrasound machine, hysteroscopy set, manual vacuum extractor, radiant warmer, cpap, mobile c-arm machine (image intensifier), ot light (shadowless lamp ceiling type major), video laryngoscope, flash autoclave, washer disinfector, examination treatment light, pulse oximeter, line powered beside neonatal, surgical diathermy bipolar, note :- 1.the basic price of the goods to be quoted without gst.2.all the prices should be quoted in indian rupee (inr) only.3.the cmc should be quoted year wise without gst.4.cmc rate and turnkey work (if any) shall be included for determining l-1 bidder.5.gst shall be payable as applicable from time to time.6.charges towards packing & forwarding, inland transportation, insurance (local transportation and storage) would be borne by the supplier from warehouse to the consignee site, loading/unloading and other local costs incidental to delivery of the goods to their final destination as per section-i shall also be borne by the supplier.7.the price should be inclusive of supply, installation, commissioning charges.8.l-1 will be determined item-wise on total basic price of the equipment (all inclusive) (excluding gst) + total cmc (if any) (excluding gst) + turnkey work (if any) (excluding gst) for all the items as mentioned in section-i.9.in case of optional accessories/items (if any), rates may quoted in separate pdf file (along with the price bid), which will not be considered for determining l-1 bidder. it is reiterated that the bidder should not submit this in the technical bid.it is certified that the cost of goods shown above, is all inclusive except gst.signature of authorizedsignatory with seal

CTN :39643331

09 Apr, 2025 NA

Shimla - Himachal Pradesh

Tender For procurement of machinery and equipment on behalf of directorate of health services hp - cardiac monitor, high pressure high speed horizontal steam instrument sterilizer, phacoemulsification unit, fess endoscopy unit, ent operating microscope, oae(clinical), ent workstations /treatment unit, shaver system cum micro drill, digital mammography unit, analogue mammography machine, computed radiography system for mammography, electro hydraulic operation table for orthopaedic surgery, surgical instrument set (ortho), autopsy(mortuary)table, mortuary cabinet (6- body), laparoscopic set with instruments, ctg machine, delivery table(obstetric labour table), foetal doppler, multipara monitor (obg), video colposcope, suction apparatus, autoclave horizontal, autoclave vertical, autoclave ot automatic, multi-channel electrocardiographic, fogging machine for ot (fumigator), crash cart trolley, infusion pump, retinoscope, indirect ophthalmoscope, electric cautery, laryngo-laryngoscope, digital otoscope, head light(ent), power drill for ortho, power saw for ortho, harmonic scalpel, laparotomy set, single puncture laparoscope for tubal ligation, spot light, note :-1.the basic price of the goods to be quoted without gst.2.all the prices should be quoted in indian rupee (inr) only.3.the cmc should be quoted year wise without gst.4.cmc rate and turnkey work (if any) shall be included for determining l-1 bidder.5.gst shall be payable as applicable from time to time.6.charges towards packing & forwarding, inland transportation, insurance (local transportation and storage) would be borne by the supplier from warehouse to the consignee site, loading/unloading and other local costs incidental to delivery of the goods to their final destination as per section-i shall also be borne by the supplier.7.the price should be inclusive of supply, installation, commissioning charges.8.l-1 will be determined item-wise on total basic price of the equipment (all inclusive) (excluding gst) + total cmc (if any) (excluding gst) + turnkey work (if any) (excluding gst) for all the items as mentioned in section-i.9.in case of optional accessories/items (if any), rates may quoted in separate pdf file (along with the price bid), which will not be considered for determining l-1 bidder. it is reiterated that the bidder should not submit this in the technical bid.it is certified that the cost of goods shown above, is all inclusive except gst.signature of authorizedsignatory with seal

Central Government/Public Sector

CTN :39404024

18 Mar, 2025 NA

Kokrajhar - Assam

Tender For corrigendum : supply of sf6 handling machine_ schedule 1_ item_ 10_ m9406996104_ 100244200

CTN :39575649

05 Apr, 2025 NA

Shimla - Himachal Pradesh

Tender For procurement of machinery and equipment on behalf of national health mission - ot table, anaesthesia work station, defibrillator, phototherapy unit, x-ray mobile, x-ray machine 500 ma, x-ray machine 300 ma, colour doppler ultrasound machine, hysteroscopy set, manual vacuum extractor, radiant warmer, cpap, mobile c-arm machine (image intensifier), ot light (shadowless lamp ceiling type major), video laryngoscope, flash autoclave, washer disinfector, examination treatment light, pulse oximeter, line powered beside neonatal, surgical diathermy bipolar, note :- 1.the basic price of the goods to be quoted without gst.2.all the prices should be quoted in indian rupee (inr) only.3.the cmc should be quoted year wise without gst.4.cmc rate and turnkey work (if any) shall be included for determining l-1 bidder.5.gst shall be payable as applicable from time to time.6.charges towards packing & forwarding, inland transportation, insurance (local transportation and storage) would be borne by the supplier from warehouse to the consignee site, loading/unloading and other local costs incidental to delivery of the goods to their final destination as per section-i shall also be borne by the supplier.7.the price should be inclusive of supply, installation, commissioning charges.8.l-1 will be determined item-wise on total basic price of the equipment (all inclusive) (excluding gst) + total cmc (if any) (excluding gst) + turnkey work (if any) (excluding gst) for all the items as mentioned in section-i.9.in case of optional accessories/items (if any), rates may quoted in separate pdf file (along with the price bid), which will not be considered for determining l-1 bidder. it is reiterated that the bidder should not submit this in the technical bid.it is certified that the cost of goods shown above, is all inclusive except gst.signature of authorizedsignatory with seal

Handling Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector