Latest harvesting pole Tenders | Government harvesting pole Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

CTN :38553069

02 Jan, 2025 28.92 Lacs

Uttarakannada - Karnataka

Tender For custom bid for services - upgardation of nom tensile structur-fabrication work- fabrication of vertical member galvanised iron 150*150*1.6 mm box section frames for, entrance canopy size 140feet (07 nos weighting 500 kgs, fabrication of harizontal 100*50 mm 16mm gi box, frame, (a) size-400 feet (20nos) section size-600 feet (30nos) weigning-1200 kgs for ceeling, fabrication of vertical section member of galvanised iron 60*40*1.6mm for blocking the view & beaufication of venue - weighing 1900kgs, fabrication of circular ribs cross section supporled on the glavanised pole size +8+200mm for beautification of bar counted- weighing-450 kgs, fabrication of raise wooden metal fabrication table, acp panneling for entrance canopy, sheet roofing with sunglansed polycarbonite sheet, setting up of bar counter, circular counter for serving with services providing of shelves for storage of bottle, providing of under counter refrigerator providing/fixing of customises basin sink, plumbing work, providing/fixing of under counter storage shelves size-10ft 2.5ft*2feet+10nos, providing/fixing of l shape counter with wooden laminate 19mm ply size-5ft *2.5*2ft application of alluminium composite panneling for back drop of bar counter, providing & fixing vertical racks for display beautification of counter size (10ft 6ft) fixing of inverted glass holder, high raised stool, surface preparation application of one coated oxide primer on the fabricalled structure, providing & application of powder coated antirustblack coat colour then on existings & jr new frames, painting work, +, providing & application of wave theme paint coat on the vertical ribs strcture, electrical work, providing & fixing of inverted hanging antique lights for beautification to light up the venue space, providing & fixing of spot light for the internal fabricated false ceeling & bar counter, providing/fixing of profile led lights for beautification, electricalpoints, switch/sockets/modular box, with, wiring2.5 sqmm 2 core (including laying) 1.5sqmm*2 core*150*95, cable concealed conduit pipes, main junction box, electrical labour charge, providing/fixing of projection screen 10+6, feet, led neon name board for venue 4ft*1.5ft, transportation as actual loading/unloading alabour charges, design consultant fee

CTN :38589243

03 Jan, 2025 9.43 Lacs

Chandigarh - Chandigarh

Tender For supply of decorative pole,lt ug cable,excavation in trenches,levelling of soil,removal of surplus soil,cutting of road or floor,gi tube light,pipe fittings

CTN :38521123

21 Dec, 2024 5.00 Lacs

Mathura - Uttar Pradesh

Tender For corrigendum : supply of various material for anurakshan mah october-november 2024 under edc-i, mathura - aluminium binding wire (5 & 6 mm dia), lt clamp with nuts & bolts of pcc pole with neutral, lt shackle insulator, bolts & nuts for shackel, neutral cum earth wire gi wire 7.16 mm or 6 swg, aluminium jointing sleave for aaac conductor weasel/rabbit, aluminium jointing sleave for acsr conductor weasel/rabbit, spacer lt pvc, alluminium lug bolted type, alluminium crimping lug 400 sqmm, alluminium crimping lug 240 sqmm, alluminium crimping lug 150 sqmm, alluminium crimping lug 120 sqmm, al. pg clamps weasel to weasel, al. pg clamps dog to dog, suspension clamp for ab cable (various size), tinned copper fuse wire (various size), silica gel

CTN :38542573

23 Dec, 2024 NA

Aligarh - Uttar Pradesh

Tender For corrigendum : supply of pcc pole 8.5 mtr. long,stp pole 11 mtr. long,stone pad ,11 kv v type cross arm,11 kv cross arm clamp with n&b,11 kv pin insulator,11 kv g.i. pin with n&b,f-bracket,earthing of pole,acsr rabbit conductor,acsr weasel conductor,11 kv xlpe cable 3x185 sq.mm.,11 kv cable jointing kit o/d for 3x185 sq.mm. cable,stay set complete,t-off channel,clamp for t-off channel,11 kv disc insulator,11 kv disc fitting,concreating of pole,danger plate complete,barbed wire gi 1/2 per pole,dismantling and removal of existing conductor/cable/gi wire from the various area preparing their coils and then stacking in the respective jes (store) as per direction of supervising engineer. it includes the work of cartage, cost of labour, t&p carrier etc. required for proper completion of work.acsr weasel conductor scrap,steel & scrap,g.i. wire scrap,11 kv 3x185 sq.mm. xlpe cable scrap

CTN :38572159

27 Dec, 2024 2.00 Lacs

Medininagar - Jharkhand

Tender For supply of led street light and its accessories - item description, led street light 90 w philips / surya/ havells/ bajaj, 32 mm dia(inner dia of pole arm)x 2 mtr long gi pipe (medium class)pole arm bracket for mounting of led street lighting fitting on pole including bending the pipe to required shape (90-105 degree),2 nos. 40mmx 3mm flat iron clamp withs nuts, bolt & washer, gi coating the flat iron with primer and finished paint as per relevant standard specifications., led driver (35 w), led driver (50 w), led driver (70 w), led driver (110 w), led driver (120 w), pcb 70 w, pcb 120 w, 1 core copper wire (1.5 sqmm), 1 core copper wire ( 1 sqmm), 2 core aluminium wire ( 2.5 sqmm), 2 core aluminium wire (6 sqmm), 2 core aluminium wire (10sqmm), switch (6 amp) with gang box, pvc tape, rope light, rope light connector, hand gloves(electrical work), plier, screw driver, tester

CTN :38605086

30 Dec, 2024 NA

Multi City - Multi State

Tender For supply of 5 mtr. long gi octagonal pole with internal & external surface of the pole shall be h ot dip galvanized to 65 micron det, hot dip galvanized in single dip as per bs en iso 1461. the pole shall be continuously tapered with top dia 70mm (a/f), bottom dia 130mm (a/f) & minimum sheet thickness 3m m with inbuilt junction box i.e. flush door & base plate size minimum 200 mm x 200 mmx 12 mm with dou ble arm bracket of size 1000 mm each & standard arm cap and cable terminal board for internal connectio n of cable. the poles shall be designed as per bsen 40-3-3:2003 with latest amendment to withstand the m aximum wind speed as per is 875 for the actual loading of the fixtures. bolt size (no. x dia) - 4 x 16 mm, pc d - 200 mm, bolt length -450 mm & projected bolt length -80 mm. category reference:- bajaj bop-5030 [ w arranty period: 30 months after the date of delivery ]

CTN :37971233

26 Dec, 2024 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of supply of liu with fiber management system , supply of structural steel , fabrication of structural steel , supply of reinforcement steel , supply of hdpe pipe , supply of armoured cable , fixing frls earthing , sitc fixed non flp bullet camera , sitc fixed flp bullet camera , sitc of ptz non flp camera , sitc of nas device , sitc of 42u rack , sitc of cctv server , sitc of client ws , 65 inch commercial monitor , 43 inch commercial monitor , sitc of 8 port switch , sitc of - 24 port switch , supply and inst commission testing 8 mt pole , sitc of, ip 66 junction box , supply and laying of armoured power cable , supply and laying of armoured fibre optic cable , supply of cable tray , const back fill trench , pcc 1 2 4 , rcc 1 1.5 3 - footing pile cap , excavation , supply and laying 50 mmx6 mm gi earthing st , supply and commissioning of vms software per camera , camc for 3rd year , camc for 4th year , camc for 5th year

CTN :38579406

21 Dec, 2024 42.43 Lacs

Agra - Uttar Pradesh

Tender For s/f of led semi high mast light with 9 mtr height g.i. octagonal pole and 6no. 170-200 watt led light near at 21 d/f places distt-etah.

CTN :38589306

23 Dec, 2024 35.00 Lacs

Jaipur - Rajasthan

Tender For supply of 5mp lowlight ir ip h 265 vandal resistance motorised vf bullet camera,5mp lowlight ir ip h 265 vandal resistance compact bullet camera,sitc of 2mp vandal resistance compact dome camera,sitc of 5mp h265 network vandal resistance ptz dome camera,sitc of 128gb surveillance class sd card,supply and fixing of pole mount for ptz camera,sitc of 32ch nvr with 4 sata hdd support,supply and fixing of surveillance hard disk 08 tb,sitc of 55inch 4k uhd led surveillance grade monitor,sitc of 10 port unmanaged gigabit switch with 8 port poe,sitc of aggregation l2 l2 switch with sfp port for control room,supply drawing and testing stranded single mode 6 core glass optic fiber cable,supply drawing and testing 4 pair 23 awg solid bare copper wire,supply grouting and fixing of pole oem fabricated ms gi pipe 100 mm dia with rcc 1mtr depth,manual moling hdd depth 1 mtr,supply and drawing 40 mm hdpe pipe,supply and fixing weather proof pole mount box,supply and fixing of network rack 4u,supply and fixing industry standard small f

Harvesting Pole Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government