Get complete information related to latest Hdpe Pipes Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Hdpe Pipes Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Hdpe Pipes Tenders.
Tender For purchase of miscellaneous c class items annexure c for emd plant dongri buzurg mine-, m.s. heavy duty pipe class "c", plain ends suitable for steam line conf. to is:1239 (pt.i)/1979 with latest amendments & isi mark, dia. 1/2" nb, m.s. heavy duty pipe class "c", plain ends suitable for steam line conf. to is:1239 (pt.i)/1979 with latest amendments & isi mark, dia. 2" nb, m.s. heavy duty pipe class "c", plain ends suitable for steam line conf. to is:1239 (pt.i)/1979 with latest amendments & isi mark, dia. 3" nb, m.s. slip on flange, flat face, weldable as per bs 10, table "f", drilled. 1" nb, m.s. slip on flange, flat face, weldable as per bs 10, table "f", drilled. 3/4" nb, m.s. slip on flange, flat face, weldable as per bs 10, table "f", drilled. 2" nb, ms reducer socket weldable - 1" x 1/2" , chlorinated rubber paint - smoke grey in 20 lit. pack, thinner for chlorinated rubber paint berger/asian make or equivalent in 20 lit pack, oxygen regulator two stage 10x-63b, acetylene (da) regulator, single stage two gauge, hand shield armour with welding glass - 83 x 108 mm, ms elbow welded - 1/2", hdpepipes 5 meter long: complete with 2 nos. m.s. slip on flanges as per bs 10, table d, at both end and 2 nos. long neck pipe end conf. to iss duly welded at both ends of pipes. - od 63mm, hdpe long neck pipe end od 63 mm, welding electrode - delta therm ss3-3.15mm or equivalent., welding electrode - delta therm ss-3 - 4 mm or equivalent., v belt b-70, v belt b-128, v belt b-48, spun cotton thread for bag closing m/c (suitable for 25no. needle modi thread no.2. (in cone of 1000 mtr.), welding hand gloves (leather) 14", helite packing non-metallic - 1/8" thick champion make (red coloured), painting brush - 2-1/2", rock drill hose pipe non metallic, working pressure 6 kg/sq.cm. size 3/4", rock drill hose pipe non metallic, working pressure 6 kg/sq.cm. size 1", teflon tape roll - 3/4", m s welding electrode - 3.15 mm (weldfast make or equivalent), m s welding electrode - 4 mm (weldfast make or equivalent), white chindhi (waste cotton for cleaning), bucket fastener dia.3/8" x 1-1/2" long, rubber packing sheet - 1/4" thick, cutting wheel- 4" (corburondum make or equivalent), mild steel hex.nuts & bolts (full threaded bsw) dia. 3/8"x2" long, mild steel hex.nuts & bolts (full threaded bsw) dia.1/2"x2" long, mild steel hex.nuts & bolts (full threaded bsw) dia.1/2"x2-1/2" long, mild steel hex.nuts & bolts (full threaded bsw) dia.5/8"x3" long, mild steel hex.nuts & bolts (full threaded bsw) dia.5/8"x4" long, mild steel hex.nuts & bolts (full threaded bsw) dia.5/8"x5" long, mild steel hex.nuts & bolts (full threaded bsw) dia.5/8"x6" long, set of 12 nos. double ended ring spanner, size: 6x7 to 30x32 (taparia make only), set of 12 nos. double ended ring spanner, size: 6x7 to 30x32 (taparia make only), "thermocouple: sheath leangth 900 mm, type : k as per ansi mc 96.1, limits of error : standard (+/- 2.2 c), nos. of circuit: one (simplex), hot junction: ungrounded, sheath diameter : 12mm, sheath length : 1000 mm, sheath material : inconel 600, process connection : adjustable s.s.flange 1/2"" asa 150 rf, wire gauge : 16 swg, insulation : ceramic beads with mgo, tip rating : 1150 deg. c, termination : our standard weather, (proof die cast alluminium head with threaded cap chain & powder epoxy coating), cable entry : 1/2"" bsp (f), single", pvc half gum boot with specification:- cotton lining (inside), black colour, lsl marked, industrial outsole material . pvc. pu ankle low & high ankle material pvc usage/ application industrial features anti skid, heat resistant, length low ankle, gender male & female with lining, steel toe cap, sole color black, 14" length, certification lsl, heat resistance up to 120 deg.cel. , suitable for acid & alkalies resistance. mangla make or equivalent, size: no.6, pvc half gum boot with specification:- cotton lining (inside), black colour, lsl marked, industrial outsole
Tender For ttps mech ii ahp unit iv v bah eco and aph break down maintenance of hdpepipes of various size from 32 mm od to 450mm welding of punctured joint new joints dismantling and re erection of the hdpe pipe of old new and rubber lining of ms pipe of vario
Tender For construction of cad works for lis sunhani ist and 2 stage in tehsil jhandutta distt. bilaspur h.p (sh:-providing laying jointing and trenches of hdpepipes and providing and fixing of ci sluice valves etc.
Tender For work of providing and laying 400mm dia doubl corrugated hdpe pipe line for conveyance of rain water from prestige apartment, ittamadu and surrounding appartments to hoskerehalli lake coming under hoskerehalli service station of aee sw4 sub division
Tender For work of providing and laying 300mm dia double corrugated hdpe pipe line for conveyance of rain water and stp excess water from high raised buidings or appartments to dorekere lake near bhcs layout uttarahalli coming under pp layout service station of aee sw5 sub division
Tender For additional work for providing fhtc, supplying, laying of distribution system including with all necessary specials, upvc/hdpepipes etc. all complete for zone- ii/b (northern sector part-ii) under nakashipara block of nadia district.
Tender For supply of taking down of light fittings of any type size and model complete all as specified , taking down of brackets of any type size and model complete all as specified , m and l in repair steel tubular swaged poles complete with cast iron base plate finial taper plug , m and l in repair steel tubular swaged poles complete with cast iron base plate, finial taper plug , re fixing of led street light fittings of any wattage outdoor type complete all as specified and directed. , s and f in repair led street light fitting 120 watt 230 v ac outdoor type with high pressure die cast aluminum hosing , supply and fixing in repair led flood light 80 watt 230 v ac outdoor type with thermal management in multiple optics and equipped , s and f in repair led flood light 150 watt 230 v ac outdoor type with thermal management in multiple optics and equipped , s and f cable junction box 155x210x92 mm in size, made out of thermoplastic having ip 66 protection for outdoor installation fixed with 4 way , supply and passing through steel tubler pole service connection 1100 volts grade multicore fr round insulated copper conductor , s and f single arm bracket made of 40mm dia 1.0mtr long for security light with mounting ms clamp , s and f in repair rigid non metallic pvc conduit of dia 20 mm exclusive of boxes junction terminal but inclusive of all , m and l for earthing complete with ms galvanized plate of size 60cmx60cmx6mm as earth electrode buried directly in ground , taking down out unservicable or servicable ug cable of any cross section area and connection etc. , excavating in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth , returning filling in including spreading, levelling watering and well ramming in layers not exc. , removing excavated materials soils not exc. 50.00 mtr and depositing where directed at a level not exc. , m and l sand cushioning dry in trenches for protection of ug cables below above and around the ug cable , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable , s and l for cable in trenches or passing through pipe, xlpe insulated 25 sqmm 4 core. , s and l for cable in trenches or passing through pipe, xlpe insulated, heavy duty, galvanised steel strip or wire armoured electric lt cable 10 sqmm 4 core. , re laying fixing or passing through xlpe insulated armored electric power ug cable etc. , s and f 40 mm high density polyethylene pipe hdpe of pressure rating 6 kgf cm2 fixed complete to walls ceilings or in floors etc. complete all as specified and directed . , s and f galvanised iron pipe 40mm bore dia light grade for protection of ug cable laid in floors , labour only for horizontal boring for passing protection pipe up to 80mm bore dia under road foot path, not exc. 10.00 mtr , m and l for pcc 1.2.4 type b1 using 20 mm graded aggregate as in coping for pole including form work and finishing the surfaces , m and l for pcc 1.3.6 type c2 using 40 mm graded aggregate as in foundation for pole etc complete all as specified and as directed. , s and f hdpe dwc double walled corrugated of diameter 25 mm including disconnection and connection of cable. , m and l for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn , wrecking crow bar or claw bar as per is 706 (q3)
Tender For supply of rigid non metallic pvc conduit of dia 20 mm exclusive of boxes junction terminal but inclusive of all tees , m and l for earthing complete with ms galvanized plate of size 60cmx60cmx6mm as earth electrode , taking down out unserviceable or serviceable ug cables of any cross sectional area and connections including bricks , excavating in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth taking out and laying of cables etc. , returning filling in including spreading levelling watering and well ramming in layers not exc. 250mm in soft loose soil , removing excavated materials soils not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above , m and l sand cushioning dry in trenches for protection of ug cables below above and around the ug cable , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable , supply and laying for cable in trenches or passing through pipe xlpe insulated 25 sqmm 4 core. , supply and laying for cable in trenches or passing through pipe xlpe insulated 10 sqmm 4 core. , re laying fixing or passing through pipe xlpe insulated armoured electric power ug cable heavy duty with aluminium conductor , s and f 40 mm high density polyethylene pipe hdpe of pressure rating 6 kgf cm2 fixed complete to walls , s and f galvanised iron pipe 40mm bore dia light grade for protection of ug cable laid in floors , labour only for horizontal boring for passing protection pipe up to 80mm bore dia under road foot path not exc. 10.00 mtr , m and l for pcc 1.2.4 type b1 using 20 mm graded aggregate as in coping for pole including form work and finishing the surfaces , m and l for pcc 1.3.6 type c2 using 40 mm graded aggregate as in foundation for pole etc , s and f hdpe dwc double walled corrugated of diameter 25 mm including disconnection , m and l for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases , s and f crca sheet steel duly phosphatized and powder coated with 7 tank process wall pole mounted floor , wrecking crow bar or claw bar as per is 706 (q3)
Tender For supply of taking down of light fittings of any type size and model complete all as specified , taking down of brackets of any type size and model complete all as specified , m and l in repair steel tubular swaged poles complete with cast iron base plate finial taper plug bolts nuts and screws as specified , re fixing of led street light fittings of any wattage outdoor type complete all as specified and directed. , s and f in repair led street light fitting 120 watt 230 v ac outdoor type with high pressure die cast aluminum hosing. , s and f in repair led flood light 80 watt 230 v ac outdoor type with thermal management in multiple optics and equipped , s and f in repair led flood light 150 watt 230 v ac outdoor type with thermal management in multiple optics and equipped with ip66 protection , s and f cable junction box 155x210x92 mm in size made out of thermoplasti having ip 66 protection for outdoor installation fixed with 4 way bakelite cable terminals , supply and passing through steel tubler pole service connection 1100 volts grade multicore fr round insulated copper conductor , s and f single arm bracket made of 40mm dia 1.0mtr long for security light with mounting ms clamp , s and f in repair rigid non metallic pvc conduit of dia 20 mm exclusive of boxes junction terminal but inclusive of all tees bends elbows , m and l for earthing complete with ms galvanized plate of size 60cmx60cmx6mm as earth electrode buried directly in ground , taking down out unserviceable or serviceable ug cables of any cross sectional area and connections including bricks , excavating in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth taking out and laying of cables etc. , returning filling in including spreading levelling watering and well ramming in layers not exc. 250mm , removing excavated materials soils not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above , m and l sand cushioning dry in trenches for protection of ug cables , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable , s and l for cable in trenches or passing through pipe xlpe insulated wire armoured electric lt cable 25 sqmm 4 core. , s and l for cable in trenches or passing through pipe xlpe insulated heavy duty galvanised steel strip or wire armoured electric lt cable a 10 sqmm 4 core. , relaying fixing or passing through pipe xlpe insulated armoured electric power ug cable heavy duty , s and f 40 mm high density polyethylene pipe hdpe of pressure rating 6 kgf cm2 fixed complete to walls ceilings or in floors etc. , s and f galvanised iron pipe 40mm bore dia light grade for protection of ug cable laid in floors , labour only for horizontal boring for passing protection pipe up to 80mm bore dia , m and l for pcc 1.2.4 type b1 using 20 mm graded aggregate as in coping for pole including form work and finishing , m and l for pcc 1.3.6 type c2 using 40 mm graded aggregate as in foundation for pole etc complete all as specified and as directed. , s and f hdpe dwc double walled corrugated of diameter 25 mm including disconnection and connection of cable , m and l for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground , wrecking crow bar or claw bar as per is 706 (q3)
Tender For supply of taking down of light fittings of any type size and model complete all as specified. , taking down of brackets of any type size and model complete all as specified and directed. , m and l in repair steel tubular swaged poles complete with cast iron base plate finial taper plug bolts nuts , m and l in repair steel tubular swaged poles complete with cast iron base plate , re fixing of led street light fittings of any wattage outdoor type complete all as specified and directed. , supply and fixing in repair led street light fitting 120 watt 230 v ac outdoor type , supply and fixing in repair led flood light 80 watt 230 v ac outdoor type with thermal management in multiple optics , supply and fixing in repair led flood light 150 watt 230 v ac outdoor type with thermal management , s and f cable junction box 155x210x92 mm in size made out of thermoplastic aving ip 66 protection , supply and passing through steel tubler pole service connection 1100 volts grade multicore fr round insulated copper conductor , s and f single arm bracket made of 40mm dia 1.0mtr long for security light with mounting ms clamp , s and f in repair rigid non metallic pvc conduit of dia 20 mm exclusive of boxes junction terminal , m and l for earthing complete with ms galvanized plate of size 60cmx60cmx6mm as earth electrode buried directly in ground earth pit not less than 2.25 mtrs , taking down out unserviceable or serviceable ug cables of any cross sectional area and connections including bricks gi pipe etc. , excavating in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth taking out and laying of cables etc. , returning filling in including spreading levelling watering and well ramming in layers not exc. 250mm in soft loose soil complete all as specified , removing excavated materials soils not exc. 50.00 mtr , m and l sand cushioning dry in trenches for protec tion of ug cables , m and l for fly ash bricks locally available laid dry width wise across the line of cable , supply and laying for cable in trenches or passing through pipe xlpe insulated heavy duty , supply and laying for cable in trenches or passing through pipe xlpe insulated 10 sqmm 4 core. , re laying fixing or passing through pipe xlpe insulated armoured electric power ug cable 10 sqmm 2 core to 25 sqmm 4 core , s and f 40 mm high density polyethylene pipe hdpe of pressure rating 6 kgf cm2 fixed complete to walls , s and f galvanised iron pipe 40mm bore dia light grade for protection of ug cable laid in floors , labour only for horizontal boring for passing protection pipe up to 80mm bore , m and l for pcc 1.2.4 type b1 using 20 mm graded aggregate , m and l for pcc 1.3.6 type c2 using 40 mm graded aggregate as in foundation for pole etc complete , s and f hdpe dwc double walled corrugated of diameter 25 mm including , m and l for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground , crimping tools (q3)