Latest heat treatment furnace Tenders | Government heat treatment furnace Tenders

Central Government/Public Sector

CTN :45710479

17 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot miscellaneous scrap - scrap/condemned heat treatment furnace no.-6 (multi purpose heating furnace bogie hearth, gas & oil (fired) maximum furnace tempreture 1200*c, normal furnace tempreture 900*c, maximum furnace bath capacity 12 mt, size: 6500 mm (l) x 3000 mm (w) x 1300 mm (h), make/supplier: m/s ferro craft, m&p no. 36 ht 0107. cutting and dismentling allowed. lot is formed as is where as basis.purchasers are advised to inspect the lot before bidding.

State Government

CTN :45696571

03 Jul, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate (lrm) for supplying of materials (construction plantation materials) for mgnrega work under murarai-ii development block - coal (steam), bitumen vg-30, bitumen emulsion, hire charges of diesel road roller- 8 to 10 tonne, diesel oil, stone screening type a (13.2 mm), stone screening type b (11.2mm), coarse sand, stone aggregate(single size): 06 mm nominal size, grade 1 stone metal 63 mm to 45 mm, 1st class picked jhama bricks(traditional), coloured inter locking c.c. paver block, fine sand, silver sand, portland cement, 1st class traditional bricks (kiln burnt), fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 40 mm nominal size, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), medium sand, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, rcc pipe 1000 mm dia np -3 spigot, rcc pipe 1200 mm dia np - 3 spigot, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), eucalyptus bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, mild steel tubes hot finished seamless type, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, galvanised steel plain sheets, seam bolts and nuts 6 mm dia and 25 mm long, g.i. plain washer for seam bolts, stainless steel bolts /square bar and plates, welding by electric plant, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, tor steel rods/hysd bars/tmt bars (sail/tata/rinl) (fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), brick aggregate (single size):40 mm nominal size, moorum, loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material, stone a

State Government

CTN :45678444

01 Jul, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate of material items for implementation of mgnrega schemes under rampurhat ll development block - technician, helper (technician), coolie, carriage of tar bitumen, carriage of stone aggregate below 40 mm nominal size, carriage of steam coal, carriage of stone aggregate 40 mm nominal size and above, 1st class picked jhama bricks(traditional), carriage of soling stone & masonry stone, coloured inter locking c.c. paver block, fine sand, silver sand, 1st class traditional bricks (kiln burnt), coarse sand, fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size): 40 mm nominal size, medium sand, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, carriage of r.c.c. pipes 900 mm dia, carriage of r.c.c. pipes 1000 mm dia, carriage of r.c.c. pipes 1200 mm dia, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), welding by electric plant, brick aggregate (single size):40 mm nominal size, moorum, carriage of carriage of moorum, stone aggregate(single size):63 mm nominal size, river bed material, fitter(grade1), brick aggregate (single size):50 mm nominal size, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), nylon net, paddy straw, g i wire, stone boulder ( 225mm-150mm ), stone boulder( 225 mm above ), laterite boulder, carriage of cost of neelgiri/maxican grass truf sqm, wood dust, sal silliguri, sal malaysia, neem wood, other local wood, ordinary teak wood, sisu/gamar wood, local sal wood, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), bright finished or black enamelled mild steel screws 40 mm, bright finished or black enamelled mild steel screws 20 mm, bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm, bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm, bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm, hydraulic door closer tubular type aluminium section body, brass 150 mm floor door stopper (0.357 kg), anodised aluminium hanging type door stopper, malayasia sal cleat, chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, frp composite door frame 66mm x 90mm, frp composite door frame 66mm x 70mm, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, supplying solid flush type doors of commercial quality, white cement, coal tar, carriage of steel, r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area, r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, fan hook, chlorinated polyvinyl - chloride (cpvc) pipe 15 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 32 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 40 mm outer dia,

Central Government/Public Sector

CTN :45691190

21 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of heat treatment furnace

Central Government/Public Sector

CTN :45657667

14 Jul, 2026 NA

Ramgarh - Jharkhand

Tender For supply of heating element for heat treatment furnace 01 for temperature upto 1250 degree c drawing attached , heating element for heat treatment furnace 02 for temperature upto 1250 degree c drawing attached , heating element u type 1.5 kw 250 volt50hz ac total length750mm material kanthan a element dia 8mm. . , thermocouple k type temperature sensor up to 1250 degree celsius probe length 300 to 350mm probe. . .

CTN :45317976

29 Jun, 2026 NA

Hyderabad - Telangana

Tender For corrigendum : providing of custom bid for services - refurbishment of high temperature vacuum heat treatment furnace control panel

corporations/Associations/Others

CTN :45627555

06 Jul, 2026 NA

Kolar - Karnataka

Tender For auction sale of used scrap grinding wheels,used scrap aluminium valves,obsolete discarded bolts nuts washers springs,used scrap high percentage nickel chromium charge trays,scrap high percentage nickel chromium,used damaged scrap broken saw cutting machine blades,salvaged condemned beml equipment be220,salvaged condemned beml equipment be200,used scrap links of various models,end bits of steel rods and pipes,used scrap codemned heat treatment furnace,scrap gi ms pipes,obsolete discarded wheel disc rims,obsolete discarded field returned condemned axles pto,scrap gears,scrap track shoe profile end cut pieces,m s melting scrap cut pieces,used scrap condemned co2 and annual rate contract welding machines and parts,condemned scrap machines,used removed from refurbished transmissions pressure plates,miscellaneous damaged ms valves,cond small medium big of various shapes castings like planet carriers,aluminium turning and boring chips,aluminium scrap,used damaged electrical motors,condemned rusted springs,obselete non moving heavy and medium casting,obsolete small medium big forging,used damaged electrical aluminium motor,cond hydraulic tanks,condemned used lifting chains,condemned obsolete old model bl9h engines,condemned used ms stands,scrap track shoe gas cut end bits,condemned scrap hoses with springs,condemned scrap filters,obsolete discarded brake pads brake bands,scrap defence argo altraine vehicles,used scrap batteries

CTN :45587866

16 Jul, 2026 NA

Nagpur - Maharashtra

Tender For 3 mt solution heat treatment furnace

CTN :45469652

29 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For modification of heat treatment furnace for conversion from lpg/propane to png.

State Government

CTN :45415906

10 Jun, 2026 NA

Birbhum - West Bengal

Tender For local market rate for construction items materials of labpur dev. block jurisdiction of fy-2026-27 (including all taxes). - laying and jointing pvc pipe. heading, welding by electric plant, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, 1st class picked jhama bricks(traditional), 1st class traditional bricks (kiln burnt), modular fly ash bricks, fly ash bricks(traditional), coloured inter locking c.c. paver block, moorum, fine sand, medium sand, coarse sand, coarse sand, portland cement, white cement, water proofing materials, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ), grade 1 stone metal 63 mm to 45 mm, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble), ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, bitumen vg-30, bitumen emulsion, coal tar, diesel oil, sal silliguri -in/c labour cost, sal malaysia-in/c labour cost, neem wood -in/c labour cost, other local wood -in/c labour cost, ordinary teak wood -in/c labour cost, sisu/gamar wood -in/c labour cost, local sal wood -in/c labour cost, bamboo (8cm-10cm dia) including fixing, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sal bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), malayasia sal cleat, wood dust, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, supplying solid flush type doors of commercial quality, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, anodised aluminium hanging type door stopper, brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, ms integrated grill for steel window and ventillator, two point nose steel handle, openable steel windows as per is sizes with side hung shutters and horizotal glazing bars., top hung side hung ventillator, fixed type ventilators as per i.s. sizes with horizontal glazing bars h

Heat Treatment Furnace Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government