Get complete information related to latest Hinge Cover Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Hinge Cover Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Hinge Cover Tenders.
Tender For supply of hinged cover assembly for coupling socket assembly as per rdso specification no.rd so/pe/spec/ac/0177 (rev'1')-2013 or latest suitable for inter vehicular coupler high capacity (500a 7 50v) [ warranty period: 30 months after the date of delivery ]
Tender For supply of hinged cover for blind socket assembly with hinged pin - 01 no., tube-01 no., spring - 01 no., circlips - 2nos., and split pins - 2 nos for 500a iv coupler of lhb coach as per rcf drg.no.lw71342 and rdso spec no.rdso/pr/sprc/ac/0177 rev 0-2013 or latest.
Tender For supply of safety plate for latch catch arrangement for main door of lhb coaches to rcf drg. no. la51 127, alt. b. [ warranty period: 30 months after the date of delivery ]
Tender For supply of safety plate for latch catch arrangement for main door of lhb coaches conforming to rcf d rawing no. la51127 alt. b or latest. material & specification as per drawing [ warranty period: 24 month s after the date of delivery ]
Tender For supply of hinged cover for blind socket assembly suitable for inter vehicular coupler (500a, 750v) for lhb type ac coaches conforming to rdso specification no. rdso/pe/spec/ac/0177-2013 (rev. 1). [ warranty period: 30 months after the date of delivery ]
Tender For tender for supply of taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete , material and labour powder coated anodised aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc complete all as specified , material and labour powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors , windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber/neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is 733 and is 1285 , fixing with dash fasteners of required dia and size , including necessary filling up the gaps at junctions , i.e at top , bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth , rust free , straight , mitred and jointed mechanically wherever required including cleat angle , aluminium snap beading for glazing/ paneling , c.p. brass/ stainless steel screws all complete as per architectural drawings and the directions of engineer in charge. , supply and fix 4.8mm thick sheet glass , ordinary quality and glazing with oil putty in square but n. exc 0.5 sq. m in each pane , supply and fix for metallic aluminium sliding window shutter lock of size 100mm , push to unlock type , concealed handel-cum-latch lock type , completed all as specified and directed , supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to is 1868 with minimum anodic coating of grade ac 15) of approved design/pattern , with approved standard section and fixed to the existing window frame with c.p. brass/ stainless steel screws at the rate of 200 mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening , all complete as per requirement and direction of engineer in charge. , dismantling fillets , rails , posts , rafters , purlins , etc. under 40 sq. cm in section unframed work , dismantling boarding , any description , fixed in any position with nails , material and labour for clean sawn second class hard-wood in scantlings timber fixed , supply and fix 12mm thick block boards , grade 2 quality , interior grade , decorative type with decorative face veneer on both face , fixed with screws to timber frame-work. , supply and fix 30mm width of flaps of continuous (piano) hinges , mild steel , bright finish or electrogalvanised , supply and fix 75mm size brass handles , cast type , polished bright , supply and fix 100mm hasp and staple , safety type , aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws , taking down chowkhats or frames (without taking off shutters from the frames) 1.5 sqm and n exc 4 sqm , supply and fix 2nd class hardwood plain , solid , straight chowkats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue pinned at joints , supplied and fixed size 100x60mm , supply and fix 30mm thick flush shutters , solid core construction , with block board core and plywood face panels , commercial type on both sides both face is covered with deco rative face veneer with lipping/frame to match , supply and fix of 125 mm long mild steel butt hinges , medium weight cold rolled complete all as specified and directed. , supply and fix 150mm aluminium handles , cast type , anodised , supply and fix of 200mm long aluminium alloy , anodised , sliding door bolt with hasp , staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed , supply and fix of 200 mm long
Tender For corrigendum : supply of single probe receiver assembly complete with tapered bell mouth housing, release lever, release lever lanyard and indicator arm , base plate for single probe receiver assembly , single probe receiver hanger , swivel arm assembly with slip pelican hook arm and bail , hinged cover plate for probe receiver , adaptor hose to probe receuver complete with split camp , receiver hose assembly 177 mm 7 inch x 4.5 m complete with re usable coupling at one end matching with receiver and the other end with female coupling matching with flange adaptor , flanged adaptor for re usable coupling , eye plate for in haul for probe fuelling pl 13 tonnes , snatch block with shackle open type , eye plate for lead block pl 19.5 t , snatch block c w shackle, pl 8 t 3 nos to be used on either port or stbd side at one time , deck elbow filling bend with nut adaptor at both ends , single probe , jackstay rope , jackstay wire terminal fitting , inhaul line , 7 inchsplit clamps , c spanner for 7 inchreusable coupling , c spanner for 7 inchadaptor , nato 3 avcat reception coupling incl cap and flange , nato 5 fresh water reception coupling and sap , aluminium fuel filter
Tender For supply of lab equipment minimum average annual turnover of the bidder (for 3 years)- supply, installation and placement of functional factory made equipment set up consisting of r.h. 900 ht.c-frameassy. for table depths 770 wall side without upright with 1540 island without upright & 920 wall side withupright (2), r.h. 900 ht.c-frame assy. for table depths 620 wall side, 1240 island without upright & 770wallside with upright (2), l.h. 900 ht.c-frame assy. for table depths 770 wall side without upright , 1540island without upright & 920 wall side with upright (2), l.h. 900 ht.c-frame assy. for table depths 620 wallside, 1240 island without upright & 770 wallside with upright (2), common 900 ht.c-frame assy. for tabledepths 770 wall side without upright , 1540 island without upright & 920 wall side with upright (4), 900 ht.corner c-frame table (1), 1500 module length horizontal members (3), 1200 module length horizontal members(4), 770 depth wall side without upright end cover panel (4), island without upright c-frame joining bracket (1),1500 module length single side electrical trunking - cutouts: 6 module + 6 module + 6 module (3), 1200 modulelength single side electrical trunking - cutouts: 6 module + 6 module + 6 module (2), outer cover for singlesided electrical trunking (6), wfu-c-su-900-1s-rh-635h (1), wfu-2s-1d-750w-635h (6), wfu-2s-1d-600w635h (8), pp drop-in sink model s 06 560 mm (w) x 355 mm (d) (1), 3 way water faucet bench mounted, 8""swing gooseneck model no. 100/32 (1), silicon sealant - black (1), jet black granite (sq.mt.) 18 (2) mm thk(8.5 smt), masking tape, 6mm self adhesive natural rubber strip (40mt), flexible/f serated connector model : hp01 make: premier (1), anti-siphon bottle trap model : s 04 make: premier (1), 6/16a, 6 pin shutter socket - modelno: m1332 (30), 6 module plate - model no: cs956m-s (15), 16a, 1 way switch model no: m0130 (30) as perdirection of engineer in charge , supply and installation storage cabinet for storage with top cover plate and provided with a ventilation system toenable exhaust of localized fumes emanating from the materials stored. the material should be is 1.2 mm crca mswith pure epoxy powder coating. it must be fitted with a float glass to enable visibility inside the cabinet. it shouldalso has louvers/perforations for air supply. ms apparatus storage cabinet with over all dimension of 750w x560d x 1800h mm as per direction of engineer in charge , supply and installation of storage cabinets with a full pp construction, dimension of storage cabinet is 1000w x1500h x 486d mm. all safety claims of this product are backed by third party certification for chemical spot test for49 chemicals listed in sefa standards and used across various industries. the cabinet to have proper ventilationensuring air circulation and preventing a build-up of dangerous fumes within the cabinet. the shelves comprise ofremovable height adjustable collection trays that are leak-proof, enhancing the safety factor of the storage units.louvers are provided on the front doors to allow inward low of fresh air. zero- corrosion: full polypropylene body,with no exposed metal hardware, ensures there is no corrosion. closing mechanism: the cabinet has a latch to ensureproper shutting of the doors. removable & height- adjustable pp trays as shelves: the pp collection trays can beremoved easily, and can be height-adjusted as required. load bearing capacity & spill containment: each shelf cantake up to 30 kgs (approx) of uniformly distributed load. the shelves are leak-proof and fully contain accidentalspillages. locking provision: the doors to have provision for using a padlock to safeguard the contents of the cabinetas per direction of engineer in charge , supply, installation and placement of functional factory made equipment set up consisting of r.h. 900 ht.c-frameassy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side withupright (