Latest horn assembly Tenders | Government horn assembly Tenders

State Government

CTN :42971848

18 Dec, 2025 91.81 Lacs

Raichur - Karnataka

Tender For a) scope of work covers supply, installation and commissioning of total 12 nos.of 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit-5&6 with required pcs, electronic modules, splitters, modems, junction boxes, mounting kit, enclosures, interconnecting cables, software and all other accessories required to make the system complete and fully functional, shall be provided for continuous level measurement and monitoring of level of each coal bunker and also to ensure satisfactory performance of the system commissioned at rtps site which shall be on the basis of single point responsibility, completely covering the activities and services in respect of all the equipment works specified and covered under the specifications. the work involves i) installation and commissioning of 12 nos. 3d radar level type level transmitters with suitable mounting accessories, display indicators, isolators, annunciator, smps, terminals, panel internal wiring, led bulbs, door switch etc. at the bunker level ii)commissioning of rs 485 communication /other cables from bunker level transmitters to the desktop pc at u-5&6 control rooms.iii)commissioning of desktop pcs for 3d multi vision for monitoring of all the 12 bunkers level at u-5&6 control room respectively and also both units bunker levels at pc being installed at chp control room. iv)loading of all the required licenced software to the desktop pc for 3d radar level transmitter and cable routing, glanding, mounting of cable tray, termination and ferruling is in the contractors scope.cable trays will be provided by m/s.kpcl.b)all fabrication works required for installation and commissioning of instruments with jbs,protective cover/canopies and allied works are in contractor/agency scope itself.c) all civil works like drilling/cutting rcc floors,grouting,refilling floors,conduiting under ground cables cable tray mounting, masonary works are in contractor/agency scope itself.d)storage of materials while executing works is single point responsibility of contractor/agency scope itself. e)software details-1. the page containing all bunker level data shall be in full page which must be visible from at least a distance of 6-8mtr .(font size should be more) and shall have a historical trend storage for minimum 45days & real time trend with not less than15min sampling time. f) at chp control room, the existing kpcl pc shall be enabled with bunker level software & shall be communicated through existing lan and as a redundancy the seperate optical fiber cable communication with media convertor has to be provided.the lan cables has to be protected with cable conduit g)materials supply shall be completed in all respect within the stipulated period as per the contract. materials shall be delivered to rtps site through ee(stores)o&m. unloading of materials at rtps site location and shifting of the same to work location is under the contractor/agency scope only. h)handling, shifting, unpacking and erection and commissioning of the entire system shall be under the scope of bidder itself. i)all required consumables, hardware and licenced software, accessories and any other materials which are not included in the scope and required for successful installation and commissioning of the 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit-5&6 are under the contractor/agency itself. j)all the materials required for the installation and commissioning of 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit- 5&6 shall be made as detailed under the technical specifications. k)interfacing of all the bunker level transmitters outputs to the desktop pcs at u-5&6 control rooms through rs - 485 communication protocol.(the required 1 pair x 1 sq.mm shielded armoured cables as per requirements shall be supplied approx-500 meters or if more). for more details of scope of work refe

CTN :42859015

12 Dec, 2025 NA

Bhopal - Madhya Pradesh

Tender For online tender for gym goods - olympic bench press (flat/ incline/ decline)-, olympic bench press (flat/ incline/ decline)-specification- olympic size suitable to use with olympic rods plate storage should be available on sidesproduct should of international standard. physical demonstration of equipment may be required to access the quality standards., lat pull down machine, lat pull down machinespecification- independent diverging press arms, and adjustable thigh pad wt. stack(min) 180lbs. instruction card to show how to use the machine. floor bolt down option for stabilityproduct should of international standard. physical demonstration of equipment may be required to access the quality standards., heavy duty commercial treadmill-, heavy duty commercial treadmill-specification- commercial treadmill , with shock absorption system, must have 8-10 individual shock absorbers. shock absorbers should not be made of rubber or urethane , rustproof, aluminium side rails and end caps, integrated speed and incline buttons should be available on user handles, side handles length: 23-25inch, to provide secure feeling while running at high speed. running belt with multi ply minimum 58 (l) x 20 (w) running surface. running belt should have incorporated technology for straight tracking, ideal gripping texture surface, must consume lower power. speed range: min 0.8kph to 20kph. incline range: min 0% to 15% (0.5% increments).rollers: 3.4 - 3.5" precision crowned steel rollers - front & back.motor capacity: min 3 hp ac continuous duty .heart rate: support both digital [contact electrodes] & polar , transport wheel for easy mobility. tray: must feature removable/lockable anti-theft cup holders 2nos, integrated accessory tray. frame: robust paint (corrosion, stain, and chemical resistant coating). maximum user weight: 175-185kg . display console: should have led display with digital readouts. demonstration of machine may be required for technical evaluation. certificate of origin may be asked. machine should be produced only in us/europe with high quality standard., chest machine, specification- independent converging arms wt. stack(min) 180lbs. instruction card to show how to use the machine. floor bolt down option for stability product should of international standard. physical demonstration of equipment may be required to access the quality standards., commercial elliptical cross-trainer :-, specification- commercial cross-trainer. must have different independent handles to offer both total body & lower body workout. moving handle must have multi grip function with integrated resistance keypads. pedals: must be oversized [12-16inch] with flex foam cushion. large knee clearance area to accommodate taller user. stride length: fixed stride length in the range 18-21inch. unit must be self powered with inbuilt generator & battery. resistance range: 20. step up height: 9-10inch. heart rate: support both digital [contact electrodes] & polar. transport wheel for easy mobility. frame: robust paint (corrosion, stain, and chemical resistant 3coating). maximum user weight: 175-185kg. demonstration of machine may be required for technical evaluation.certificate of origin may be asked. machine should be produced only in us/europe., dumbbells with dumbbell rack: -, dumbbells with dumbbell rack: -specification- rubber coated hex style fixed dumbbells, proper handgrip in 2.5kg, 5kg, 7.5kg, 10kg, 15kg, 20kg pair each. storage rack with proper design to store dumbbells (2 tier), electro statically powder coat finish., dumbbells with dumbbell rack: -, specification- commercial shoulder press biomechanical correct movement to target shoulder muscles. wt. stack (min) 170lbs. machine should have adjustable seat for adjusting range of motion. frame: powder coated, corrosion, stain, and chemical resistant coating instruction card to show how to use the machine. should incorporate counter balance weight for low starting resistance. product should of

State Government

CTN :42850748

08 Dec, 2025 38.00 Lacs

Guna - Madhya Pradesh

Tender For corrigendum : rate contract for supply of local purchase items under circle ashoknagar - local purchase, tripping coil 11 kv make crompton, tripping coil 11 kv make scheinder, tripping coil 11 kv make s&s, tripping coil 11 kv make bhel, tripping coil 11 kv make prestine, tripping coil 11 kv make shreem, tripping coil 11 kv make 11 kv small erl, tripping coil 11 kv make alstrom, closing coil 11 kv make bhel, closing coil 11 kv make stelmec, closing coil 11 kv make crompton, closing coil 11 kv make erl, closing coil 11 kv make scheinder, closing coil 11 kv make s&s, expulsion fuse 20 a. for capacitor bank ( for 100 kvar unit ), expulsion fuse 40a for capacitor bank ( for 200 kvar unit ), breather for ptr (capacity- 3 kg.), ct smart clamp for 16/20 mm stud for raccoonn, dog and panthor conductor, cb smart clamp for raccoonn, dog and panthor conductor, c&r panel indicators indicating lamps, tnc switch, mfm (tong tester 27 t meco), bucholz relay, mog, 33 kv stud 20 mm suitable for ptr, 11 kv stud 20 mm suitable for ptr, 33 kv bushing for ptr suitable for 20 mm stud, 11 kv bushing for ptr for 20 mm stud, smart clamp/bimeattalic clamp for ptr bushing stud size 20 mm, rubberized cork seat 4 mm (2 x 3 ft.), rubberized cork seat 10 mm (2 x 3 ft.), oil temperature indicator (oti) , dial 150mm , with capillary, mercury switch type, winding temperature indicator (wti) , dial 150mm , with capillary, mercury switch type, smart t clamp of all sizes, smart pg clamp of all sizes, isolator pad clamp for raccoon & dog conductor, (i) rubber conical washer suitable for 12 mm stud(hv side), (ii) rubber conical washer suitable for 12 mm stud (lv side), bimetalic clamp suitable for dtr 315 kva & 200 kva x-mer flat brass size 60x60x10 mm in central 20 mm hole having joint aluminium section size 60x70x42 mm suitable for 150 sqmm cable 06 ]=sdddno. gi nuts & bolts flat and spring washer weight 0.900 gram (approx.+-5%), bimetalic clamp suitable for 100 kva dtr brass flat pad size of 50x50x6 mm with 16/20 mm hle & other side aluminium pad type clamp pad size 65x60x15 mm each along with 04 nos. g.i. nut & bolt of size 50x6 mm with washer & spring washer suitable for 075/80 mm acsr/aaac conductor, rope polypropylene 22-24/1 inch dia (pole propylene rope size 22 to 24 mm dia make-tufrope isi mark, led street light luminaries 50 watt complete electrical fitting make sharp/heavals/indium/ syska/lux nd lumen/ikma or others equilent make with guaranty/ warranty 2 year., hrc fuse for different capacity of dtr 100 kva, hrc fuse for different capacity of dtr 200 kva, hrc fuse for different capacity of dtr 315 kva, hrc fuse base for different capacity of dtr 100 kva, hrc fuse base for different capacity of dtr 200 kva, hrc fuse base for different capacity of dtr 315 kva, contract free volt light indicator voltage rang 90 to 1000v frequency 50 hz display by led flashing & beep sound, piercing connector suitable for size 95-150/160 sqmm pvc cable, transformer reapairing cork sheet packing kit complete (26 no.item), ct clamp with 35 to 40 mm threading in brass bushes 20 mm on aluminium portin 80 45 35 mm with 04 noss. g.i. nut bolt suitable for dog conductor, ct clamp with 35 to 40 mm threading in brass bushes 16 mm on aluminium portin 80 45 35 mm with 04 noss. g.i. nut bolt suitable for dog conductor, lv brass stud size 260x20 mm complete set suitable for 200 kva / 300 transformer set comparising of brass stud 265x20 mm -01 no, brass hexa nut full thered -01 no, brass lock nut-02 no, brass rear nut-02 no sealing ball washer 01 no. and brass plain washer -02 no., 33 kv vacuum interrupter stelmec, 33 kv vacuum interrupter scheinder, big gear for 11 kv vcb (stealmec), t.c fuse wire for 3.15 & 5 mva & 8 mva, 11 kv vacuum interrupter stelmec, 11 kv vacuum interrupter scheinder, screw driver 10 inch.make taparia, small gear for 11 kv vcb (stealmec) small gear assly, repairing of numerical relay 30 valts (over current/earth faut

State Government

CTN :42903927

08 Dec, 2025 12.00 Lacs

Gwalior - Madhya Pradesh

Tender For rate contract for supply installation of peripherals for computer printer and networking equipments repairing of computers printers and toner refilling in various type of printers for offices situated under om circle mpmkvvcl gwalior - computer/pc/desktop (hp, acer , ibm , compaq , hcl , hcl infinity, lenovo, dell), ram (ddr-3 ram 8 gb), ram (ddr-3 ram 4 gb), ram (ddr-4 ram 4 gb), ram (ddr-4 ram 8 gb), hard disc (usb external 1 tb) (segate/hitachi/toshiba/sony/wd), hard disc (sata 1 tb) (segate/hitachi/toshiba/wd), hard disc (sata 500 gb)/(segate/hitachi/toshiba/wd), hard disc (sata 500 gb)/(segate/hitachi/toshiba/wd)/refurbished, hard disc (sata 1 tb) (segate/hitachi/toshiba/wd)refurbished, ssd 1 tb (segate/wd/toshiba), ssd 500 gb(segate/wd/toshiba), processor fan (for core 2 duo), processor fan (for core i3 and above), smps 500w (intex/frontech/zebronic/enter), smps repairing, graphic card (2 gb), pci lan card, power cable 1.5 mtr, vga cable 1.5 mtr, keyboard+mouse combo(logitech/hp/dell), wireless keyboard+mouse combo(logitech/hp/dell), key board (logitech/hp/dell), mouse (logitech/hp/dell), formating servicing of computer re-installation of os and relevent software, atx cabinet with smps(intex/zebion), atx cabinet without smps(intex/zebion), dvd writer sata (lg/asus/samsung), mother board repairing, power cable 3mtr, vga cable 3 mtr, new mother board dg61 including installation (zebronics,other compatible), new mother board dg81 including installation zebronics(other compatible), new mother board dg 110 series including installation zebronics(other compatible), hdmi cable 1.5m, hdmi cable 3m, processor i3 3rd gen and above, processor i3 7th gen and above, servicing and repairing of tft/ledmonitor (damaged not included), lcd/led 15"/15.5"/16" lg/samsung/hp/dell/zebronics, lcd/led 18.5"/19.5"lg/samsung/hp/dell/acer/lenovo, new mother board dg 310 series including installation zebronics, led panel replacement 18.5", tft panel replacement 15", processor i5 3rd gen and above, processor i5 7th gen and above, tft/led monitor reparing (power supply circuit), tft/led monitor reparing (display unit), all in one pc power adopter(acer/lenovo) all models but compatible make, hdd cable sata, sata power connector, cmos battery, laser printer and its accessories hp-1020, hp-1505n, hp p-1108 and same type series, opc drum compatible, logic card compatible, pcr roller compatible, chip replacment compatible, bullet for printer cartridge, doctor blade compatible, wiper blade compatible, magnet roller compatible, reffling toner including powder 120grm, reffling toner including powder 80grm, pressure roller compatible, teflon paper compatible, fuser unit, engine control card, relay, moter, paper senser, gear assembly, paper pickup assemble, power supply card reparing, power supply card, networ card, cartridge senssor, scanner unit, scanner cable, screen panel, laser unit for photocopy, paper try, printer new carrtidge original make all models, printer complete base, printer servicing, printer cable 2 mtrs, canon mf 244, 3010, 274dn,hp mfp-128, m208dw series and same type series, opc drum compatible, logic card compatible, pcr roller compatible, chip replacment compatible, bullet for printer cartridge, doctor blade compatible, wiper blade compatible, magnet roller compatible, reffling toner including powder 120grm, reffling toner including powder 80grm, pressure roller compatible, teflon paper compatible, fuser unit, engine control card, relay, original cartridges of all canon (all mentioned above), other parts canon mf 244, 3010, 274dn,hp mfp-128, m208dw, paper senser, gear assembly, paper pickup assemble, power supply card reparing, power supply card, networ card, cartridge senssor, scanner unit, scanner cable, screen panel, laser unit for photocopy, paper try, printer complete base, printer servicing, ups & accessories (samtek, libert iton,microtek, unline, umax, iball , power etc (0.5 to 1 kva), transformer charging isolated 12 v ac, ups

State Government

CTN :42940899

02 Dec, 2025 NA

Rewa - Madhya Pradesh

Tender For purchasing of new computer item scanner and printer for divisional forest office and all range in forest division rewa - printerhp laserjet tank mfp 2606sdw printer a4 black and white laser multifunction printer, perfect for business print copy, scan, duplex, adf print speed up to 21 ppm (black) usb, ethernet networking, hp laserjet pro mfp 4104dw printer a4 black and white laserjet printers,perfect for business print, copy, scan duplex, adf prints up to 42/40 ppm (ltr/a4) apple airprint , ethernet, mopria , usb, wi-fi , bluetooth touchscreen, computer cpu dell -new vostro small desktopprocessor intel core i7 14700 os windows 11 home single language (dell technologies recommends windows 11 pro for business) graphics intel uhd graphics 770 with shared graphics memory memory 8 gb: 1 x 8 gb, ddr5, 4400 mt/s storage 512gb m.2 pcie nvme solid state drive, computer cpudell -new vostro small desktopprocessor intel core i5 14400 os windows 11 home single language(dell technologies recommends windows 11 pro for business) graphics intel uhd graphics 730 with shared graphics memory memory 8 gb: 1 x 8 gb, ddr5, 4400 mt/s storage 512gb m.2 pcie nvme solid state drive, monitordell 27 monitor - s2725hsdiagonal size 27" (68.58 cm) resolution / refresh rate 1920 x 1080 audio integrated 2 x 5w speakers adjustability height-adjustability stand, tilt, swivel, pivot ports 2 x hdmi (hdcp1.4) ( supports up to fhd 1920 x 1080 100hz, as per specified in hdmi1.4), monitorlg (34wq75c-b) 86.36cm 21:9 curved ultrawide qhd (3440 x 1440) monitor(size 34 inch) screen size: 34 inches screen resolution: 3440x1440 refresh rate: 60hz response time: 5 ms sync type: n/a panel type: ips vesa size: 100 x 100 video cable included: 1x hdmi cable video cable included: 1x usb-c to usb-c cable video cable included: 1x displayport cable curved: yes displayports: 1 hdmi ports: 2 dvi ports: none vga ports: none usb-c ports: 1 thunderbolt ports: none usb docking: yes aspect ratio: 21:9 touch screen: no height adjustable: yes 3.5mm connector: yes srgb colour gamut: 99% hdr: hdr10, upsmicrotek ups legend 750m id2 230vac/360w ups system power backup & protection for home office, desktop pc & shopsbrand microtek uses for product homepower source battery powered colour multicolour voltage 230 volts, key boarddell kb216black multimedia wired keyboard with usb interface, plunger keys technology and chiclet key style, hot key-volume, mute, play/pause, backward, forward, warranty 1 year., mousedell ms116 wired optical mouse1000dpi, led tracking, scrolling wheel, plug and play, scannercanon lide 300 flatbed document and photo scanner scan resolution: 2 400 x 2 400dpi scan speed (a4, 300dpi): approx. 10s, scannerhp scanjet pro 2000 s4 sheet feed scanner sheetfed up to 600 dpi up to 35 ppm/70 ipm usb 3.0 recommended daily duty cycle: 3500 pages, new computer system 13th genration intel core i7 processor, windows 11, 16gb ddr4 ram, 1tb ssd solid state drive monitor screen (32 inch) with audio sound, new computer system (core i5, ram 16gb, 1tb hdd), new computer system (core i7, ram 16gb, 1tb hdd), monitor screen samsung (color display unit) (24 inch), ups single battery, ups double battery, brother printer (double sided printing),, hp laser tank mfp 1005 printer, keyboard/mouse combine, socket extention board, scanner (hp scanjet pro 2000 s4 or s2 sheet-feed scanner, new laptophp omen amd ryzen 7 octa core 7840hs - (16 gb/1 tb ssd/windows 11 home/6 gb graphics/nvidia geforce rtx 4050) 16-xd0015ax laptop, 1tb hdd (hard disk) hp, hp computer (all in one )-13th gen intel core i5-1334u(16gb ddr4,512gb ssd) ips three sided micro edge anti glare fhd 23.8 (60.5cm)win home office 24,fhd carnara, hp laptop 13th gen intel core i-5-1334u(16gb ddr4 512 gb ssd) anti glare,micro -edge,fhd 15.6 /39.6cm win 11,m365 basic (1 year) office 24 iris xe fhd carnara w/shutler, printer hp hp smart tank 790 all-in-one auto duplex,wifi color printer with adf and fax,print,scan & cope for office,multic

CTN :42583810

01 Dec, 2025 NA

Vadodara - Gujarat

Tender For bid to ras supply of project on design automation power regulator for opto electronic section using arduino e e - arduino board , led or tft display for unit with connection work to main pcb , circuit board with feedback ic main programming ic with coding and software work , connection work and coding work of feedback ic , voltage regulator module , coding and compile work of voltage regulator work

Central Government / Public Sector

CTN :42776620

03 Dec, 2025 7.31 Lacs

Ranchi - Jharkhand

Tender For corrigendum : supply of supply of electrical spare items : :--thyristor module psthm 162 19 mcc 200 16 io1 , thyristor module psthm 200 16 mcc 312 18 io1 , tube light 20 w led , flameproof light 60 w led , braided copper wire 6 sq.mm , crocodile clip , flameproof safety torch , ceiling bldc motor fan , rccb 2 pole 30 ma 64 a , earthing cable 10 sq mm copper , copper strip 25 sq mm , sfu unit 63 a 3 pole with neutral , 1 core 1.5 sq mm pvc copper circular sheathed cable with rigid conductor , 1 core 1 sq mm pvc copper circular sheathed cable with rigid conductor , motor operator geared motor device of acb , undervoltage release uvr of acb , shunt trip coil , shunt closing coil , acb front cover sace emax e1n ms 10 , acb front cover sace emax e3n ms 25 , hrc fuse din 400a , hrc fuse base , soft-starter front keypad lcd display assembly with control card , hrc fuse din 250a , hrc fuse din 200a , hrc fuse din 63 a , hrc fuse din 80a , mcb 40a 2pole 240v

State Government

CTN :42920788

16 Dec, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply and execution of various signalling equipments as per boq attached inspection rites consignee - fabrication and supply of point rodding (ground connection) set with insulation complete set for electric point machine 220 mm stroke clamp type for thick web switches as per rdso drg no rds0/s/3454 alt -a ver-1 or latest. (inspection agency:- rites), supply and fixing of gi bend pipe 50 mm dia., bclass, for cable entry into point machine with all accessories. note: th is item to be operated independently for those points where point machines are functional, but gi bend pipe is not provided. for all other new installation of point machines, item 06002 of the sor includes the provision of gi bend pipe. (inspection agency:- consignee), supply of point machine ground connection insulation complete set including for p bracket insulation for point machine irs type 220 mm.(inspection agency:- rites), supply of stretcher bar insulation complete set for point machine irs type 220 mm stroke clamp type.(inspection agency: - consignee)., supply of track lead junction boxes fiber glass as per drg.no. cwm - 00597 of f.r.p material to irs.s.23 specification along with fixtures i.e., on ms angle 50x50x5mm, 0.9 meters long two numbers of g.i. pipes of 25mm dia. along with nuts and bolts and 500mm long (this includes gromite bushes, 60mm pbt terminal). (inspection agency:- consignee), supply of aluminium ladders of height 5 feet for maintainer at relay room and ips room of model no: 8226 of youngman, plantex or similar. (inspection agency: - consignee)., supply of lps 3.00 mm thick rolled copper strip of reputed branded make. (inspection agency: - consignee), supply of insulation resistance tester. make fluke 1507 or similar. (inspection agency:- consignee), supply, fabrication and fixing of the calling on board/bslb board as per rdso drg. no. sa 2373 (adv)/stop/warning board as per drg. no. sa-2380 (adv), or as applicable, on concrete foundation and painting with retro reflective paint. all work to be carried out as per railway site engineer instructions.(inspection agency:- consignee), supply, fabrication and fixing of retro reflective signal number plates as per ncr drg. no. typ/14/0014 dtd 28.11.2014 issued vide ncr letter no. s&t/ ncr/drg/typ dated 28.11.2014, on signal post with contractors own material like clamp, u bolts, nuts etc.(inspection agency:- consignee), supply of digital cable fault locator for metallic s&t cables of reputed make as per tec spn no. gr/tie-05/03, july 2006 & tec 73060:2006 like khushicomms model venus 120 orsimilar branded make. consignee shall approve the supply only after successful demonstration at site(inspection agency:- rites), supply and testing of cable route tracer and marker locator model and make 3m dynatel model locator 2273m or reputed branded make.(inspection agency:- rites), supply, installation and commissioning of central gateway. note: single centre gateway shall cater maximum up to 32 data transmitter node (modbus).(as per annexure a) (inspection agency:- rites), supply, installation, testing and commissioning of data transmitter node in location box. modbus type note: maximum range 400 meter. (as per annexure b) (inspection agency: - rites), supply, installation , testing and commissioning of data transmiter modbus cum repeater for augmenting range of ourdoor data transmiter node (modbus), where distance of location box is more than 400 meter with respect to central gateway.(as per annexure c) (inspection agency:- consignee), apparatus case led indication status display unit cum allarm system for yard.single display system shall cater to maximum 45 no of location boxes.(as per annexure d)(inspection agency:- consignee), fabrication, supply and fixing of p, c, a, g, ibs etc. marker disk painted and lettered with enamelled paint of approved colours, on signals, conforming to rdso drg. no.sa - 23456, as per standard practice and technical specifications.(inspection agency:- consig

CTN :41939958

28 Nov, 2025 NA

Bardhaman - West Bengal

Tender For bid to ras supply of supply installation testing and commissioning of 1.25 mm pixel pitch based indoor direct view led wall with mount structure display size 6.6 m x 2 m , supply installation testing and commissioning of 1.25 mm pixel pitch based indoor direct view led wall with mount structure display size 2.4 m x 1.35 m , supply installation testing and commissioning of led controller power distribution unit display management controller 08 inputs and 08 outputs with wall management software , supply installation testing and commissioning of optical fiber hdmi cable of 20 m , supply installation testing and commissioning of ceiling mounted tile microphone , supply installation testing and commissioning of ceiling mounted network speakers , supply installation testing and commissioning of column speakers , supply installation testing and commissioning of amplifier , supply installation testing and commissioning of digital signal processor with software- based control system aec processing 64 channels , supply installation testing and commissioning of digital signal processor with software-based control system aec processing 24 channels , supply installation testing and commissioning of 8 x 8 hdmi video matrix switcher , supply installation testing and commissioning of handheld control device touch panel controller source layouts , supply installation testing and commissioning of 24 port poe l3 gigabite network switch quad core cortex 1.8 ghz 64 bit cpu , supply installation testing and commissioning of 15 kva online ups 30 min power backup 3 phase input 1 phase output , supply installation testing and commissioning of 24 u rack , supply installation testing and commissioning of shielded loudspeaker cable with accessories as per site requirement ) /bid number : gem/2025/b/6570733 * /dated: 19-09-2025 & & / bid document 1 / 23

CTN :42921450

16 Dec, 2025 NA

Delhi - Delhi

Tender For supply of supply testing installation and commissioning of audio and video systems c c - sitc of ceiling mounted speakers , sitc of amplifier , sitc of beam forming array mic , sitc of audio digital signal processor cum controller , sitc of video conference system with one camera , sitc of 110 inch interactive flat panel , sitc of 75 inch confidence monitor , sitc of 8x8 seamless multi viewer matrix switcher , sitc of video controller , sitc of touchscreen controller of video audio lighting glass blinds and all aspect of the hall placed at the seat of secretary , sitc of tile lights , sitc of light management processor , sitc of power supply unit , sitc of universal dimmer , sitc of workstation , sitc of slim podium with mic and pc , sitc of web based conference schedular software , sitc of touchscreen at entrance for schedular and display of ongoing conference details , sitc of hdbt transmitter , sitc of hdbt reciever , sitc of manageable switch , sitc of cable cubby , sitc of rack , sitc of 5 kva online ups , sitc of data wall 163 inch , sitc of display panels 75 inch , sitc of led display screens 6 feet x 8 feet , sitc of speaker , sitc of dsp , sitc of amplifer , sitc of digital display panels 75 inch , sitc of digital display screens 20 feet x 3 feet , sitc of content management software for indoor displays , sitc of media player for indoor displays , sitc of digital display screen 18 feet x 6. 5 feet , sitc of all weather speakers , sitc of curved digital display screen 30 feet x 10 feet for amphitheatre , sitc of content management software for outdoor displays , sitc of media player for outdoor displays , sitc of cable connector as per requirements , integration and programming , any addl cost oblique charges , comprehensive annual maintenance contract for first year , comprehensive annual maintenance contract for second year ) /bid number: gem/2025/b/6923365 * /dated: 25-11-2025 & & / bid document1 / 38

Horn Assembly Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government / Public Sector

State Government