Latest hose clamp Tenders | Government hose clamp Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

CTN :38555875

03 Jan, 2025 NA

Sivaganga - Tamil Nadu

Tender For supply of 00350516a ,fuel hose , 36c-30394a ,adjusting lever , adjusting lever , 630004, 00778087,actuating cable , 441732, 441732c,screw plug , 200433a, 00200433a,vent cap - vent cap breather , 00460087,scraper rubber , 00211869, 211869,hexagon screw , 00216453, 216453,hexagon nut , 00394297 ,sprinkling nozzle , 00107441, 107441,hose -3.15m , 00225789, 225789,hose clamp , 01226002, 01226002a,cap , 00330507a ,twin nipple , 01409824a,sprinkler pipe , 00851124a, 008511244,water pump , 00260894, 260894,screwed socket , 00746827, 36-a-2-004,reflex valve , 00314226, 314226,half clip , 00576476, 576476,o ring , 233327a ,breather filter, breater , 00249483, 36249483,rubber metal buffer , 00341649, 341649, 04.030.20.0,engine mounting foot , 00336165,centa coupling , pp11159,hydraulic filter element , 06.474.10.0.00,fuel filter assy , stanadyne 5 micron s-f ha , c8t111703700, t11.17.037.0, 00366617,ignition switch, main ignation switch , pp10854 , pp11882,wiper blade , c8v194303500, v19.43.035.0,head light switch , c8pp11331000, pp11331, 7405843,work light assy with bulb , c83638491700, 0038497, 233366,parking brake switch , c836b5005000, 36-b-5-005, 7211123,hour meter , c8pp11848000, 7624726,tail lamp lh with bulb , c8pp11761000, 7624725,tail lamp rh with bulb , 00843008 ,interval timer sw , pp11279,wiper motor , 207365, 7602772,singal horn , 46.252.05.00, 46.252.05.0.00,lub oil pressure sensor, lub oil pressure switch , 1203002,oil pressure gauge , pp11241,rpm meter , 0039177,oil temp indicator, oil temp gauge , c8975065000, 975085,starting relay 4 st 12 v - starter relay 12v , c836b5001000, 36-b-5- 001,steering column switch , vig438620,fuse blade 15 a , 542492,fuse blade 10a , c836c5022g00, 36-c-5- 022g,w-h engine , c836c5025d00, 36-c-5-025d,w-h rear light , c836c5026d00, 36-c-5-026d,w-h front light , c836c5024c00, 36-c-5-024c,w-h intermediate , v12.01.001.1,fan 12v , bu4160059- pp10989,mcb 16 amp bid details/ 2 / 43

CTN :38521123

21 Dec, 2024 5.00 Lacs

Mathura - Uttar Pradesh

Tender For corrigendum : supply of various material for anurakshan mah october-november 2024 under edc-i, mathura - aluminium binding wire (5 & 6 mm dia), lt clamp with nuts & bolts of pcc pole with neutral, lt shackle insulator, bolts & nuts for shackel, neutral cum earth wire gi wire 7.16 mm or 6 swg, aluminium jointing sleave for aaac conductor weasel/rabbit, aluminium jointing sleave for acsr conductor weasel/rabbit, spacer lt pvc, alluminium lug bolted type, alluminium crimping lug 400 sqmm, alluminium crimping lug 240 sqmm, alluminium crimping lug 150 sqmm, alluminium crimping lug 120 sqmm, al. pg clamps weasel to weasel, al. pg clamps dog to dog, suspension clamp for ab cable (various size), tinned copper fuse wire (various size), silica gel

CTN :38542573

23 Dec, 2024 NA

Aligarh - Uttar Pradesh

Tender For corrigendum : supply of pcc pole 8.5 mtr. long,stp pole 11 mtr. long,stone pad ,11 kv v type cross arm,11 kv cross arm clamp with n&b,11 kv pin insulator,11 kv g.i. pin with n&b,f-bracket,earthing of pole,acsr rabbit conductor,acsr weasel conductor,11 kv xlpe cable 3x185 sq.mm.,11 kv cable jointing kit o/d for 3x185 sq.mm. cable,stay set complete,t-off channel,clamp for t-off channel,11 kv disc insulator,11 kv disc fitting,concreating of pole,danger plate complete,barbed wire gi 1/2 per pole,dismantling and removal of existing conductor/cable/gi wire from the various area preparing their coils and then stacking in the respective jes (store) as per direction of supervising engineer. it includes the work of cartage, cost of labour, t&p carrier etc. required for proper completion of work.acsr weasel conductor scrap,steel & scrap,g.i. wire scrap,11 kv 3x185 sq.mm. xlpe cable scrap

CTN :38497470

21 Dec, 2024 NA

Kasganj - Uttar Pradesh

Tender For corrigendum : the work of supply & erection/installation of tail less unit, d.o. fuse set, boots and sleeves & diffrent types of material use in dtr protection (bp 2024-25 phase-ii) edd i & edd (rural) kasganj under the juridiction of edc, kasganj on semi turn-key basis. - supply of material by the contractor, do fuse set, m.s. top channel (125x65x2240 mm.), holding clamps for ms top channel, tail less unit 500a/650v with fitting suitable for pcc/stp pole., nut, bolt & washer, m.s. angel with clamp and nut & bolt, m.s. earthing with earth rod as per respo norms, boots & sleeves, al lugs 120 sq.mm, distribution panel box no.2 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-750 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., distribution panel box no.3 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-1400 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., safe carriage of following/ any other material from electricity store center soron/etah/aligarh to pit site of work from the kaccha & pakka road including loading & unloading at the respective ends including the cost of arrangement of labour, t&p etc. which required for topper completion of work., lt xlpe cable al. 1x120 sq.mm., acsr weasel conductor for jumpering, erection of material, erecetion/installation of d.o. fuse set, fixing of m.s. top channel (125x65x2240 mm.) with all accessories., foundation of distribution panel box no.2 circuitwith fixing arrangement & replacement of cable with lugs., foundation of distribution panel box no.3 circuitwith fixing arrangement & replacement of cable with lugs., fixing of tail less unit 500a/650v with fitting suitable arrangement like bus bar etc. for pcc/stp pole., erection of m.s. earthing with earth rod as per respo norms.

CTN :38604499

31 Dec, 2024 NA

Liluah - West Bengal

Tender For supply of set of worm drive hose clamp consisting of 03 items. 1. worm drive hose clamp 70 mm to is: 4762-02, qty/kit = 08 nos.. 2. worn drive hose clamp 50 mm to is: 4762-02, qty/kit = 08 nos. 3. worn drive hose clamp 35 mm to is: 4762-02, qty/kit = 14 nos. [ warranty period: 30 months after the date of delivery ]

CTN :38571812

20 Dec, 2024 18.33 Lacs

Kargil - Jammu And Kashmir

Tender For supply and replacement of d.g set spares for cummins make d.g sets installed at village abran, phey,zangla,karsha,sani,padum,jumkhore.of zanaskar sub- division - d.g set abran, separator, fuel water, element,lub oil filter, kit,air cleaner element, element,crn resistor, hose,plain, hose,plain, hose,plain, hose,flexible, connection,tur oil drain, belt,v ribbed, belt,v, belt,v, clamp,hose, clamp,hose, clamp,hose, hose,flexible, hose,flexible, hose,flexible, d.g set phey, separator, fuel water, element,lub oil filter, kit,air cleaner element, element,crn resistor, hose,plain, hose,plain, hose,plain, hose,flexible, connection,tur oil drain, belt,v ribbed, belt,v, belt,v, clamp,hose, clamp,hose, clamp,hose, hose,flexible, hose,flexible, hose,flexible, d.g set karsha, separator, fuel water, element,lub oil filter, element,oil bypass filter, element,crn resistor, kit air cleaner elements (k, qsk,v series), hose,flexible, belt,v, hose,plain, hose,flexible, clamp,t bolt, hose,hump, clamp,t bolt, d.g set zangla, element,lub oil filter, kit,fuel filter and ring, kit,super byp.filter elem, kit,air cleaner element, belt,v, belt,v, hose,plain, hose,plain, hose,plain, hose,plain, clamp,hose, clamp,t bolt, clamp,hose, hose,flexible, d.g set padum 1, separator, fuel water, element,lub oil filter, element,oil bypass filter, element,crn resistor, kit air cleaner elements (k, qsk,v series), hose,flexible, belt,v, hose,plain, hose,flexible, clamp,t bolt, hose,hump, clamp,t bolt, d.g set sani, element,lub oil filter, kit,fuel filter and ring, kit,super byp.filter elem, kit,air cleaner element, belt,v, belt,v, hose,plain, hose,plain, hose,plain, hose,plain, clamp,hose, clamp,t bolt, clamp,hose, hose,flexible, d.g set padum, element,lub oil filter, kit,fuel filter and ring, kit,super byp.filter elem, kit,air cleaner element, belt, belt,v ribbed, belt,v, hose,flexible, hose,plain, hose,plain, hose,plain, hose,plain, hose,hump, hose,flexible, hose,plain, hose,flexible, hose,plain, clamp,hose, clamp,hose, clamp,hose, clamp,hose, d.g set jhumkhar, element,lub oil filter, filter,fuel, filter,coolant, kit air cleaner elements (6c200kva), belt,v ribbed, hose,plain, hose,flexible, connection,tur oil drain, hose,flexible, clamp,hose, hose,plain, clamp,hose, manifold,fuel, turbo charger for 500 kva d.g set, fan for 500 kva d.g set, fan belt for 500 kva d.g set, injector for 500 kva d. g set, diode for 500 kva d.g set, magnet switer for 500 kva d.g set, magnet pickup for 500 kva d.g set, rubber insert for 250 kva d. g sets, service charges for engineer to attend d.g set. at zanaskar for installation/ replacement of d.g sets spares as and when required.

CTN :38199042

20 Dec, 2024 10.00 Lacs

Siang - Arunachal Pradesh

Tender For corrigendum : supply of fabrication - angle iron 35 mm by 25 mm by 5 mm , angle iron 50 mm by 50 mm by 6 mm , ms flat 25 mm by 3 mm , ms flat 25 mm by 4 mm , ms flat 40 mm by 6 mm , hose pipe high pressurebfor car washing plant with nozzle pipe length 20 mtr , plastic pipe flexible 12 mm id 16 mm od , araldite 36 gram tube , m seal 100 gram , spring washer 10 mm id , spring washer 11 mm id , spring washer 12 mm id , spring washer 13 mm id , spring washer 14 mm id , hose clamp 15 mm size , hose clamp 25 mm size , hose clamp 50 mm size , hose clamp 75 mm size , hose clamp 100 mm size , copper benjo washer 12 mm pkt of 100 nos , benjo washer inner dia 17 mm pkt of 100 nos , benjo washer inner dia 10 mm pkt of 100 nos , benjo washer inner dia 19 mm pkt of 100 nos , benjo washer inner dia 14 mm pkt of 100 nos , plain washer 10 mm size , plain washer 12 mm size , plain washer 14 mm size , plain washer 16 mm size , plain washer 18 mm size , plain washer 20 mm size , soap yellow , rope manila size 1 inch for recover veh , number punch 0 to 9 size 5 by 16 inch , letter punch a to z size 5 by 16 inch , fog light with complete fittings for lt vehs , rear oblique side view mirror with complete fittings for lt vehs , belt fastener nut and bolt type , cotton waste superior quality , rear oblique side view mirror with complete fittings for all model vehicles , horn 12 v for maruti gypsy , nut with bold 22 mm head length of inch , nut with bold 20 mm head length of 04 inch , nut with bold 18 mm head length of 03 inch , nut with bold 16 mm head length of 03 inch , nut with bold 14 mm head length of 03 inch , nut with bold 12 mm head length of 21 by 2 inch , nut with bold 11 mm head length of 2 1 by 2 inch , die and tap 10 into 1 mm pitch , die and tap 10 into 1pt25 mm pitch , die and tap 10 into 1pt5 mm pitch , die and tap 16 into 1pt5 mm pitch , die and tap 16 into 2 mm pitch , die and tap 6 into 1 mm pitch , die and tap 8 into 1pt25 mm pitch , die and tap 18 into 2 mm pitch , die and tap 18 into 1pt5 mm pitch , die and tap 20 into 2pt5 mm pitch , die and tap 22 into 1pt5 mm pitch , die and tap 22 into 2pt5 mm pitch , die and tap 24 into 1pt5 mm pitch , brass rod 1 inch dia , hex rod , buffing wheel size 150 mm cotton whell , buffing shop bar , drill bit 1 mm , drill bit 10 mm , drill bit 12 mm , drill bit 12pt5 mm , drill bit 13pt5 mm , drill bit 14 mm , drill bit 14pt5 mm , drill bit 15 mm

Central Government/Public Sector

CTN :38569360

17 Jan, 2025 NA

Chennai - Tamil Nadu

Tender For supply of set of items for s-trap arrangement for bolted design ir-drdo smaller bio dige ster (for non-cbc fitted coaches). 1)rubber hose, nominal dia. 70, type b, length = 375 confi rming to specification no. is:14933-2001 and to rdso drawing no. cg-16008, item-4, alt.-2, qty.-0 1no./set. 2)s.s. hose clamp 80 confirming to specification no. is:4762-84, aisi-304 and to rdso d rawing no. cg-16008, item-9, alt.-2, qty.-01no./set [ warranty period: 30 months after the date of deli very ]

CTN :38554677

02 Jan, 2025 NA

Kargil - Jammu And Kashmir

Tender For supply of 116br03009 break drum , water pump to ratiator hose , hose thermostate to radiator , hose clamp , fuel over flow pipe , 30z4110151 push rod

Hose Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector