Latest hot air damper Tenders | Government hot air damper Tenders

Central Government/Public Sector

CTN :45019228

05 May, 2026 NA

Ajmer - Rajasthan

Tender For auction sale of depot ferrous scrap - scrap u/s cast steel comprising of nj/wj adopter, buffer,yoke, knuckle, buffer plunger, shafts, icf /lhb coach parts, casing, bg/mg axle boxes/hosing, cpc top/bottom, shackle draw, extension shaft, connecting rod, vibration damper, armature pan, coupling, saddle, collars, brake disc, gears, corroded m s tyre of loco, ecc outer drum, carriage, wagon & diesel loco parts of sorts & sizes. location: bin no. 333

CTN :45027069

15 May, 2026 NA

Delhi - Delhi

Tender For supply of lock nut for dt car front bogie overhauling of rs-2 "a) lock nut for radial arm, qty = 16 nos, prevailing torque type (thread type/thread: m20, pitch: 2.5, grade 8) surface protection: a3c (iso 4042) or lanfranco part no: m20-8-a3c. cf 00-040fp6 or bt part no: 100104344 or bufab part no: ag183459-01 b) lock nut for anti roll bar foundation bracket, atp bracket, qty: (8+8)=16 nos, prevailing torque type (thread type/thread: m16, pitch: 2 , grade 8)surface protection: a3c (iso 4042)or lanfraco part no: m16-8-a3c cf 00-040fp6 or bt part no: 100104343 or bufab part no: ag183459-02 c) lock nut for primary vertical damper, secondary vertical damper, bogie to axle earth cable, qty: (16+08+01)=25 nos, prevailing torque type (thread type/thread: m12, pitch: 1.75 , grade 8) surface protection: a3c (iso 4042).or lanfranco part no: m12-8-a3c cf 00-040fp6 or bt part no:100104342 or bufab part no: ag183459-03 d) lock nut for lateral buffer, levelling rod, qty= (08+06)=14 nos, prevailing torque type (thread type/thread: m10, pitch: 1.5 , grade 8) surface protection: a3c (iso 4042).or lanfranco part no: m10-8-a3c cf 00-040fp6 or bt part no: 100104341 or bufab part no: ag183459-04 e) lock nut for brake caliper, qty= 16 nos.(thread type/thread: m20, pitch: 1.5, grade 10, standard iso 10513), surface protection: a3c (iso 4042), material dimension: as per sample (approx. dimension attached as per annexure: a) or bt part no: 100107935, f) lock nut for cleat for bogie to axle earth cable, qty=01 no, prevailing torque type (thread type/thread: m8, pitch: 1.25, grade 8) surface protection: a2c (iso 4042).or lanfranco part no: m8-8-a2c cf 00-040fp6 orbt part no: 100104340 or bufab part no: ag183459-05 note: 1) prevailing torque as per iso 2320. 2) mechanical properties as per iso 898-2. 3) certificate of genuinity required from vendor." ]

CTN :45027071

15 May, 2026 NA

Delhi - Delhi

Tender For supply of washer for dt car bogie replacement of rs-2 a) plain washer for centre pivot-08 nos. 20-200hv-st-a3c- iso 7089 bt part no. = 100104369 b) plain washer for lateral damper & earth return cable -08+02 =10 nos. 12-200hv-st-a3c- iso 7089 bt part no. =100104367 c) conical spring washer for vertical damper mount-08 nos. ""fst 12 din 6796 bt part no. =100001109 d) conical spring washer for anti roll bar body bracket-08 nos. 16-fst-a3c, din 6796 bt part no. =100104405 e) conical spring washer for speed sensor on axle box-04 nos. ""8-fst- a3c, din 6796 bt part no. =100001107 f) plain washer for bogie to coach earth cable-02nos. 10-200hv-st-a3c. iso 7089 bt part no. =100104366 g) strain washer for bogie to coach earth cable-02nos. m10 as per sample h) plain washer for apc reciever/atp antenna cable, atp odometer cable, cleat for bogie to axle earth cable-30+8+1=39 nos.8-200hv-st-a2c. iso 7089 bt part no. =100104365 make:- bufab, vardhman industrial fasteners, lps bossard pvt. ltd. , shaildeep engineering private limited, etc. ]

CTN :45013027

25 May, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of set of damper for wap-5 locos as per clw specification no. clw/ms/10/005 alt.1 or latest consisting of 05 items as given below : [1.)axle damper as per clw drg.no.1210-01-215-014 ref. 1 alt-.... set of damper for wap-5 locos as per clw specification no.clw/ms/10/005 alt.1 or latest consisting of 05 items as given below : [1.)axle damper as per clw drg.no.1210-01-215-014 ref. 1 alt-1 - qty. 8 nos [ 2.) vertical damper as per clw drg. no. 1210-01-215-014 ref.3 alt-1 - qty. 4 nos. (3.) horizontal damper as per clw drg. no.1210 -01-215-014 ref.3 alt-1-qty. 4 nos [4 ]

CTN :45000766

30 Apr, 2026 NA

Kharagpur - West Bengal

Tender For auction sale of others - condemned locomotive used and released uncerviceable equipment-[1] condemned wap-7 loco gear case assembly (10 nos) ,-i) fe-1800 kg, [2] condemned bogie o/h corresponding releaed materials-i)fe-200 kg,[3] condemned nut ,bolt,liner ect -i)fe-530 kg, [4] condemned screw coupling(02 nos) -i) fe-60.4 kg, [5] condemned 16 ton capacity two leg polyester sling (01 nos) -i)fe-18.5 kg,ii)polyester-10.1 kg [6] condemned push pull rod(02 nos) -i) fe-98.4 kg, [7] condemned ¿h¿ type cbc operating handle (04 nos) -i)fe-37.12 kg, [8] condemned yaw damper (04 nos) -i) fe-120 kg, [9] condemned verticle damper (10 nos) -i)fe-130 kg, [10] condemned horizontal damper (02 nos) -i)fe-60 kg, [11] condemned axle damper (09 nos) -i) fe-112.5 kg, [12] condemned kuckle (04 nos) -i) fe-146.4 kg,[13] condemned clevis (02 nos) -i) fe-24 kg, ,[14] condemned trunion assembly (01 nos) -i) fe-8.44 kg.total weight- 3355.86 kg-i) fe-3345.76 kg, ii) polyester-10.1 kg.

Central Government/Public Sector

CTN :45000768

04 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - 98080106: cond. & u/s. ms/ci/gi item scrap consisting of signal items, ground connection, lock rod, point machine parts, loco parts, gears, slide cover, cams, beaters, bars, ms rod/angle /channel/pipe cut piece, bm box, pipe fittings, screw couplings, coupling hook, signal three aspects, signal two aspects, cast iron components, pressure tank, augers, dip lorry, ms trolly, tension rod, plate, large pipe,signal post, fastners, pick axe, beaters, crow bars, lever, train coach door broken parts, ms stand, weighing set, motor case, compressor case, compressor valve, ms tank, nut, bolt, tool box, ci linked pots, chain, damper, l c gate parts and tap, valve, gear case, flat rod, rottery key, grill, pulley, air filter, fencing, hood, boiler tube, winch wheel, steel rope, ladder, battery boxes, frames, ms boxes, ring, ci foundation ct boxes, loco liner, buffer, buffer case, buffer plunger,icf buffer complete set, piston, piston cylinder, connecting rod, signal posts ,bearing case, tension rod, cam shaft,ms cut pieces,pipes, pump case, pta parts,shock absorber,e type lock,d bracket,axle box housing,end shield,cast iron component,trolly parts, hyd scissors table,air suspension system, pipe,ladder, pantograph parts, ms hood tap and such other similar signal,cut pieces of mast, loco and c&w items with or without non ferrous and other attachments as is where is condition. note: (1) if any non- ferrous items found in loose in the location to be handed over to custodian at the time of delivery, (2) crane/jcb loading permitted (3) cutting permitted to loadable size at the time of delivery. 4).material available in first location have to be removed first. location: in two locotion:1)b-2 and w-48,below camera of scrap yard/ssd/ptj.

CTN :44964519

29 Apr, 2026 NA

Multi City - Odisha

Tender For auction sale of others - lot no. sse/cs/2025-26/38, srl no.[1] secondary spring (outer), qty-15 nos., wt-1950 kgs, srl no.[2] dampers, qty-100 nos., wt-2500 kgs, srl no.[3] primary spring (outer), qty-20 nos., wt-364 kgs, srl no.[4] primary spring (inner), qty-20 nos., wt-80 kgs, srl no.[5] primary axle damper, qty-60 nos., wt-1008 kgs, approx. total ferrous weight-5902 kgs.

Central Government/Public Sector

CTN :43923060

22 Apr, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For bid to ras corrigendum : supply of pneumatic power cylinders for ntpc projects : : -l183419759901001 cold air damper actuator a j 08 x 08 , l183419759901002 hot air damper actuator a h 8 x 16 , l183419759901003 linkage rod for cold air damper actuator , l183419759901004 linkage rod for hot air damper actuator , l184019759901001 cold air damper actuator a h 08 x 08 , l184019759901002 hot air damper actuator a h 8 x 16 , l184019759901003 linkage rod for cold air damper actuator , l184019759901004 linkage rod for hot air damper actuator , l185619759901001 cold air damper actuator a j 08 x 08 , l185619759901002 hot air damper actuator a j 8 x 16 , l185619759901003 linkage rod for cold air damper actuator , l185619759901004 linkage rod for hot air damper actuator

CTN :44892860

18 Jun, 2026 NA

Delhi - Delhi

Tender For procurement of spares for an-32 aircraft - shocks absorber, check bolt, bolt, block, clamp, bolt, end, surge stopper, damper (v), pipe line in left engine nacelle, bolt (0101 through 0605), safety harness, bracket, jet, end piece with hose, bracket, lock, capacitor, retainer, attachment of ics acess, lock, lh, lock, rod, edging, angle, lock, rh, relay, bolt, cover, knob for pot (ms27473t16f35p), framing, bracket (up to 0610), holdr (lh) (through 0710), pipe, elbow, cable (to no. 0510 length 6330 mm), casing, lock casing (lh), bracket, relay time, pipeline, installation of nav foot ptt switch betn f 5 and 6, left hand side, runner, through connection, framing, selector switch, pipeline, elbow, pipe, leading edge, bellcrank, rope, threaded t-piece, selector switch, rivet, rear plate, an32 flight acc. a kit als, matting connector, support (rh), support (lh), link, axle, selector switch, cover plate, panel, cover plate lh, panel, pipe, panel, bracket, power supply card, panel

CTN :44903592

30 Apr, 2026 NA

Delhi - Delhi

Tender For supply of lock nut for dt car front bogie overhauling of rs-2 "a) lock nut for radial arm, qty = 16 nos, prevailing torque type (thread type/thread: m20, pitch: 2.5, grade 8) surface protection: a3c (iso 4042) or lanfranco part no: m20-8-a3c. cf 00-040fp6 or bt part no: 100104344 or bufab part no: ag183459-01 b) lock nut for anti roll bar foundation bracket, atp bracket, qty: (8+8)=16 nos, prevailing torque type (thread type/thread: m16, pitch: 2 , grade 8)surface protection: a3c (iso 4042)or lanfraco part no: m16-8-a3c cf 00-040fp6 or bt part no: 100104343 or bufab part no: ag183459-02 c) lock nut for primary vertical damper, secondary vertical damper, bogie to axle earth cable, qty: (16+08+01)=25 nos, prevailing torque type (thread type/thread: m12, pitch: 1.75 , grade 8) surface protection: a3c (iso 4042).or lanfranco part no: m12-8-a3c cf 00-040fp6 or bt part no:100104342 or bufab part no: ag183459-03 d) lock nut for lateral buffer, levelling rod, qty= (08+06)=14 nos, prevailing torque type (thread type/thread: m10, pitch: 1.5 , grade 8) surface protection: a3c (iso 4042).or lanfranco part no: m10-8-a3c cf 00-040fp6 or bt part no: 100104341 or bufab part no: ag183459-04 e) lock nut for brake caliper, qty= 16 nos.(thread type/thread: m20, pitch: 1.5, grade 10, standard iso 10513), surface protection: a3c (iso 4042), material dimension: as per sample (approx. dimension attached as per annexure: a) or bt part no: 100107935, f) lock nut for cleat for bogie to axle earth cable, qty=01 no, prevailing torque type (thread type/thread: m8, pitch: 1.25, grade 8) surface protection: a2c (iso 4042).or lanfranco part no: m8-8-a2c cf 00-040fp6 orbt part no: 100104340 or bufab part no: ag183459-05 note: 1) prevailing torque as per iso 2320. 2) mechanical properties as per iso 898-2. 3) certificate of genuinity required from vendor." ]

Hot Air Damper Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector