Latest hub cap Tenders | Government hub cap Tenders

Central Government/Public Sector

CTN :39441917

04 Mar, 2025 NA

Multi City - Multi State

Tender For supply of ckd prv for schneider electric vcb, with external gauge, mounting bracket & rear metal adaptor (fitted) to part no: r1000-8-w-t8. make: ckd only.

Central Government And Public Sector

CTN :39419228

07 Mar, 2025 13.30 Lacs

Cuttack - Odisha

Tender For sitc of 6x3tr ductable split ac units - 3tr metal body copper coil evaporator and copper coil condenser ductable ac units , installation testing and commissioning of 3 tr ductable air conditioning units , supplying and laying of copper refrigerant pipes for 3 tr ductable ac units , extra for supply and charging of additional refrigerant gas , providing indoor unit ceiling mounting bracket system , supplying and laying of 2.5sq.mm 4 core pvc or xlpe insulated and pvc sheathed copper conductor unarmoured cable , supplying and installing 300 mm width x 50 mm depth x 1.6 mm thickness size perforated painted with powder coating m.s. cable trays , providing and laying of 40mm dia fire retardant corrosion free medium class u pvc pipe along with accessories , providing and laying of 32mm dia fire retardant corrosion free medium class u pvc pipe along with accessories , providing and laying of 25mm dia fire retardant corrosion free medium class u pvc pipe along with accessories , supply fabrication and installation of 22 swg gi sheet plenum or duct complete with all accessories , supply and fixing of rectangular fire retardant canvas duct connector , supplying and fixing of powder coated extruded aluminium supply air grills with fixed front louvers

Central Government And Public Sector

CTN :39112820

05 Mar, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of 415v, utilization category ac23a, 630a local isolator cabinet in sheet steel enclosure complete with 630a, 3 pole load break switch. 2. shall be with side operated handle, padlocking facility, prebreak micro switch having 1no+1nc contact. 3. micro switch contacts shall be wired to 4 sq mm tb for external termination. 4. provision of padlock system having sufficient space to lock the isolator at off position by minimum two agencies at a time. 5. complete with both power & control circuit wiring with all insulators, bus bars and control terminal blocks. 6. detachable bottom gland plate for entry of cables from bottom. 7. front door shall be hinged and inter-locked with the isolator in 'on' position. the front door should have a minimum 3 mm thickness perspex/triplex window for observation of position of contacts. 8. isolator should confirm to iec 60364 standard. 9. the dimensional drawing of the local isolator cabinet or product catalogue showing mounting arrangement of the components should be enclosed along with the offer. 10. isolator cabinet should be provided with rain canopy. 11. any isolator parts should not be made of aluminium/aluminium alloy. 12. isolator cabinet shall be metal enclosed suitable for wall fixing using 4 welded fixations, dust and vermin proof and shall be provided with degree of protection as ip-55. 13. provision for three distinct parallel busbar per phase for termination of three nos of 240 sqmm aluminum cables for incoming and two distinct busbar per phase for termination of 120 sqmm copper cable. 14. all hardware used in isolator cabinet shall be corrosion resistant. 15. minimum clearance between the live parts and detachable bottom cable gland plate shall be 400mm. 16. cabinet should be painted with alkaline resistant epoxy paint. 17. isolator cabinet shall have provision for earthing at two separate and distinct points. 18. each isolator cabinet should be supplied with panel keys., push button station specification: 1. pbs made of 2mm sheet steel enclosure with rain canopy, protection: ip-65. 2. 01 no. of green colour start pb with 1no+1nc contacts, 01 no. of red colour stop pb with 1no+1nc contacts, 01 no.of increase pb with 1no+1nc contacts <(>&<)> 01 no.of decrease pb with 1no+1nc contacts. one emergency stop push button with 1no+1nc contacts (push to lock type) shall be provided. size of each push button is of 22.5mm diameter. inscription plate for all push buttons. 3. pb shall be wired with 2.5 sq.mm. copper wire to 40 nos. serially numbered terminal blocks (tb) of elmex make having tb-5-6, 7-8, 11-12, 13-14 <(>&<)> 17-18 shorting link. 4. two nos. of cut out of size 72x72 mm for ammeter and rpm meter shall be provided. 5. 'on','off' <(>&<)> 'trip' indication led lamps in red, green <(>&<)> amber colour respectively with inscription plate to be provided. 6. all push buttons, elements, led lamps <(>&<)> cutout for ammeter <(>&<)> rpm meter shall be on the hinged door of the pb station. 7. pb station shall be weather proof, neoprene rubber gasket suitable for outdoor application. 8. 2nos. of earthing studs to be provided. 9. left side hinged door shall be provided with flexible braided copper earthing. 10. pbs shall have 04 nos. of corrosion free bracket suitable to fix on vertical surface. 11. detachable gland plate to be provided. 12. the push button shall be painted with one coat of red oxide primer <(>&<)> two coats of zinc chromate primer and finally finished with stoving enamel grey paint. 13. the push button station shall be generally in line of enclosed drawing (fig-2). 14. party to submit the drawing along with the offer for technical scrutiny.

CTN :39421503

03 Mar, 2025 NA

Farrukhabad - Uttar Pradesh

Tender For supply of tower bolts (non-ferrous metals) v2 as per is 204 (q2) , sinks (q3) , waste pipe (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , door handles as per is 208 (q4) , tower bolts (ferrous metals) as per is 204 (q3) , bathroom or toilet mirror (v2) (q4) , steel butt hinges as per is 1341 (q3) , hydraulically regulated door closers (q3) , curtain pipe, sider and mounting bracket (q4) , taps or valves of nonferrous metals (q3)

CTN :39420259

13 Mar, 2025 NA

Darjeeling - West Bengal

Tender For supply of oil temp sensor , wheel for gen set , air filter element , mounting bracket , hours meter , drive pinion , amp meter , volt meter

CTN :39419233

13 Mar, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of mt store - hose hw 1sn 6x4300 cabin pump to hyd cyl , clutch master cyl 19 05 dia bs iii , mounting bracket rear , gear select cable , commander light glass , fuel filter fs 1212 water seperator , speedometor head , hes sensor for al gb , eng mounting pad , door lock assy rh , shaft seal

CTN :39429438

14 Mar, 2025 NA

Pune - Maharashtra

Tender For tender for supply of lv1 r90 188-94-005 sb installation of tacho generator , lv1 r90 3020720153430 disk 172-23-082 , lv1 r90 sg-18-030 armature , lv1 r90 sg-18-800a armature , lv1 r90 cqa hv 5.66.016 pipe line assy , lv1 r90 sg-18-603 labyrnith packing ring , lv1 r90 188.31.198.1 shield , z6 r90 misc-t-90s-179-20-001sb hyd mounting of power evation , z6 r90 5945-72-008-5159 electromagnetic actuator , z6 r90 6150720342872 wiring harness , branched , z1 r90 misc-tadiran-20569204050 cpu module , n1 r90 rus-t90-52-iit-412c-41-133 1 bushing tools , z1 r90 misc-yag5-091-002 antenna head , lv1 r90 2910720404771 fuel filling filter 172-33-272sb , lv1 r90 kv3-107 slip cover , lv1 r90 5315720071559 lock drg. no. 186-93-029 , lv1 r90 5340720270155 band drg no 520-25-003-05 , lv1 r90 175-35-578 bolt , lv1 r90 176-31-034sb-2 1 pipe branch , lv1 r90 188.31.086sb bracket , lv1 r90 2520720404058 disc driving 188-41-006sb , lv1 r90 520.01.004-06 bolt , lv1 r90 5315720071537 cotter pin 2x12 gost 397-79 , lv1 r90 3010720532293 sleeve 188-63-013sb

CTN :39431988

01 Mar, 2025 NA

Panchkula - Haryana

Tender For supply of copper alloy fancy taps for bathroom as per is 8931 (latest) (q3) , curtain pipe, sider and mounting bracket (q4) , towel rail / ring / rack / hooks for bathroom (q3) , waste pipe (q3) , flushing cistern (q3) , toilet seat covers (v2) (q4) , hydraulically regulated door closers (q3) , wire mesh fabric or cloth (v2) as per is 1568 (q3) , bathroom water shower (q3) , sinks / wash basins - vitreous china as per is 2556 (part 4) (q3) , european pattern toilet seat vitreous china (q3) , toilet seat - indian style squatting pan (q3) , lock stoppers as per is 1223 (q3) , connection pipe with nuts (v2) (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , ptmt tap fitting (q3) , stainless steel sinks for domestic purposes (v3) as per is 13983 (q2)

CTN :39422153

03 Mar, 2025 NA

Srinagar - Jammu And Kashmir

Tender For supply of led batten (q2) , bathroom or toilet mirror (v2) (q4) , tower bolts (ferrous metals) as per is 204 (q3) , xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1) (q2) , switch fuse unit (q3) , cast copper alloy screw down bib taps and stop valves for water services as per is 781 (q3) , towel rail / ring for bathroom (q3) , european pattern toilet seat vitreous china (q3) , molded case circuit breakers (mccb) as per is / iec 60947 (q3) , connection pipe with nuts (v2) (q3) , mcb - miniature circuit - breakers for a.c. operation as per is / iec 60898 (part 1) (q2) , door handles as per is 208 (q4) , m - seal as per is 9197 (q3) , toilet seat covers (v2) (q4) , hydraulically regulated door closers (q3) , copper alloy fancy taps for bathroom as per is 8931 (latest) (q3) , bathroom water shower (q3) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , curtain pipe, sider and mounting bracket (q4) , pvc insulated unsheathed cable with flexible conductor as per is 694 (q2) , putty for use on window frames as per is 419 (q3) , wire nails (q4) , ht tape (q3) , compression cable lugs (q3)

CTN :39432444

27 Feb, 2025 NA

Mumbai - Maharashtra

Tender For supply of bathroom or toilet mirror (v2) (q4) , flushing cistern (q3) , sinks / wash basins - vitreous china as per is 2556 (part 4) (q3) , copper alloy fancy taps for bathroom as per is 8931 (latest) (q3) , wire mesh fabric or cloth (v2) as per is 1568 (q3) , hydraulically regulated door closers (q3) , floor drain traps (q3) , towel rail / ring for bathroom (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , bathroom water shower (q3) , stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , toilet seat covers (v2) (q4) , tower bolts (ferrous metals) as per is 204 (q3) , connection pipe with nuts (v2) (q3) , steel butt hinges as per is 1341 (q3) , waste pipe (q3) , hasps and staples as per is 363 (q3) , door handles as per is 208 (q4) , curtain pipe, sider and mounting bracket (q4)

Hub Cap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector