Latest hydraulic brake fluid Tenders | Government hydraulic brake fluid Tenders

Central Government/Public Sector

CTN :45125921

18 May, 2026 NA

Mumbai - Maharashtra

Tender For auction sale of rolling stock - condemned diesel loco no. 36157 wds/6 with iron steel and non-ferrous. restricted items: 1. complete bogie frame with wheel set, axel box and gear case = 01 nos., 2. 03 nos. of wheel sets with axel boxes without gear case = 01 nos. removed items: 1. pneumatic valve and air dryer = 01 nos., 2. radiator core = 01 nos., 3. came shaft = 01 nos., 4. extension shaft = 01 nos., 5. lube oil junction 01 and junction pipe 02 = 01 nos., 6. lube oil cooler pipe = 01 nos., 7. lube oil strainer, bottom pipe and cock = 01 nos., 8. steel balo and upper rode lower = 01 nos., 9. water tank = 01 nos., 10. fuel primary filter body and secondary filter body = 01 nos., 11. sensor loader balo = 01 nos., 12. tsc foundation plate = 01 nos., 13. bubble collector pipe ( z pipe, c pipe) = 01 nos., 14. water temperature gauge, pipe = 01 nos. 15. traction motor = 06 nos. remark: 1. restricted items to be returned to the stock holder in good condition by the purchaser at the time of delivery. 2. lot no. is painted on loco. 3. approach road is available up to lot. 4. hsd oil and lubricants if found to be returned to the stock holder. 5. locos are presently stabled at diesel shed kurla. after auction and before handing over, loco will be placed at cla yard for cutting and delivery purpose. purchaser is advised that loco will be placed only after certification of line by sse/pway/mnkd and as advised by sse/d/cla. 6. after purchaser submit all the documents and d.o after auction to dme/d/cla office, sse/d/cla in consultation with sse/p.way/mnkd will decide the date of placement of loco at cutting yard and only after handing over of loco will be done. 6. purchaser has to ensure safety of railway asset and his labour while working in railway premises. if any losses arise due to negligence, the purchaser will be fully responsible. 7. purchaser has to personally visit the site and see the lot. no claim will be entertained after sale of lot. 9. purchaser has to keep enough water/sand at the cutting site. 10.lot is ok for sale. qty : 01 number. location: presently stabled at diesel loco shed kurla. stock holder: dme d cla .

corporations/Associations/Others

CTN :45121507

15 May, 2026 NA

Silvassa - Dadra And Nagar Haveli

Tender For auction sale of used hydraulic oil,gear oil,waste engine oil

CTN :45116184

18 May, 2026 NA

Hanumangarh - Rajasthan

Tender For supply of internal combustion engine crankcase oils for automotive application (v2) conforming to is 13656 (q3) , antiwear hydraulic oil (v3) as per is 11656 (q2) , gear lubricants, multipurpose (?extreme?pressure?gear?oil?) (v3) conforming to is 1118 (q3) , multipurpose industrial grease (v2) conforming to is 7623 (q3) , automotive hydraulic brake fluid, heavy duty (v2) conforming to is 8654 (q3)

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

CTN :45115782

19 May, 2026 NA

Jalpaiguri - West Bengal

Tender For supply of automotive hydraulic brake fluid, heavy duty (v2) conforming to is 8654 (q3) , internal combustion engine crankcase oils for automotive application (v2) conforming to is 13656 (q3) , antiwear hydraulic oil (v3) as per is 11656 (q2)

CTN :45083164

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - p.l no. 98050047.scrap c & w fittings consisting of bolster hanger ,anchor link, c buffer flange, control arm assembly, equalising stay, brake head, striker block, face plate, locking plate, spare parts of brake cylinder, crank shaft of main compressor, knuckle, cbc, cbc coupler, axle box , laminated pole shoe, housing, bcn door, tension rod assembly, rear cover, suspension tube, brake beam, dash pot, buffer ,oil thrower, top casting, brake cylinder(ferrous) ,bottom casting, lower spring beam, oxycut ferrous ball bearing, miscellaneousllaneous spares parts of valve & cock, draft pad, screw coupling, yoke , hand bar, pull road, cam shaft, axle cap, ferrous bearing of sorts and sizes, ferrous part of different type of valve, collar, ring, racer, socket head, jumper head, felt ring, ms cylinder, buffer casing, draw bar hook, hanger block, chain bolt, chute plate, wear plate, flap plate, draft gear, gear, pinion, impeller, schaku coupler parts, traction motor parts, nut bolts, pin, icf bogie component and miscellaneousllaneous ferrous etc. as available in lot, except any non ferrous.qty-145mt. location-east of vm road in ncb-12.

CTN :45085511

13 May, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - wast oil with barrel [(i) hyd. oil (released), qty-7291.5 ltrs, l/f no. 16/25, srl no.(ii) gear oil, engine oil, omls oil (released), qty-1780 ltrs, l/f no. 15/572, srl no. [3] empty barrel, qty-44 nos., l/f no. 20/449], approx. total oil- 9,071.5 ltrs.

Central Government / Public Sector

CTN :45084377

18 May, 2026 NA

Vijayawada - Andhra Pradesh

Tender For auction sale of others - 700hp demu dpc-vijayawada-plno-98112326-(hsn -86079100). cond and u/s under /aged 700hp demu dpc no:15033, 15034 of dls/bza. consisting of engine block complete, ventilation fan with motor, radiator fan with motor, radiators with expansion tank, hydralic pump, hydralic oil tank &oil cooler, fuel tank, muffler tank with exhaust/bellows, , engine block bed, turbo super chargers, air brake system valves(a9, sa9, c2, c3w & feed valve),a9, sa9, c2, c3w, feed valves. main reservoirs, auxilary resrvoirs, wiper motor&arm assemble with opening knob, air compressor trc 1000b, parking brake magnetic valves, horn flutes with operating valves, modified abd valves, angle cut out cocks, mr safty valves, dead man relay vlves, traction alternator, traction motors with nose caps, main rectifer assembly, bl box, 100 v gp relays, 100v auxiliary alternator-18.5kw, regulator rectifier assembly(rra) & blower motor, master controller , bl box,, 100v gp relays, electro pneumatic contractors, em contractors, 2 motors reversers, speed sensor & indicator assembly, engine starting &control pannel, head light unit, flasher light unit, dc-dc converter, 8v 450ah lead acid batteries, 6v batteries. truck assembly, axle box with bearings,buffer complet, schaku coupler assembly, , brake cylinders, wear pieces, gear case assemblies, 24b/charger alter nator, 24v self startrr, cable, control wiring lumpsum, actuator, fsd, driver cab fan, brass bearings, cntre pivot pin brass bush, etc.the all above parts ( except rc items) contains- ferrous-93162.98kg,,copper-5320.34 kg, brass-834.8kg, aluminium-1656.8 kg,stainless steel-1900kg, wood-1000kg. total qty-103.875mt. ( except rc items). rc-items 1). wheel set with bull gear-08 nos, 2) buffer complete-08 nos, 3) shaku coupler assembly-02nos/sets, , 4) brake cylinders -08 nos, 5) .8v 450ah lead acid batteries- 06nos, 6) 6v batteries-38 nos. the above dpc s are available inside the compound of dls/bza. delivery on lot basis. ds-8.no s-236190001/2. dt.07/04/2026.. ( in this dpc no:15033, bl box -01 no, not available). .note-1. rc items should be handing over by the purchaser before effecting the delivery.2) while cutting processes purchaser has to stock the similar type of material in the seperate places in a heap. purchasers shall visit the lot for physicall inspection of the material and site before bidding in e-auction. note- cutting is permitted for dismanlting/loading purpose.

Central Government / Public Sector

CTN :45084416

21 May, 2026 NA

Guntakal - Andhra Pradesh

Tender For auction sale of others - mixed scrap - 80.000 mt- delivery on actual weighment basis only. lot no. 5321 25 04 61 gtl gtl mixed ap available with sse dsl gtl scrap cond. u/s beyond use mixed ferrous scrap (ms & ci). released assorted scrap consisting of 50 items: (1) cattle guard (2) cylinder heads (3) tm end shield (4) outer end liner bearing caps (5) knuckle (6) cbc (7) draft gears (8) side buffers (9) equalizing beams (10) compressor liners (11) compressor housing (12) water pump (13) lube oil pump (14) brake adjusters (15) screw coupling (16) gear cases (17) compressor heads (18) extension shafts (19) cam gears (20) extension gears (21) pulleys (22) cam shafts (23) sucs (24) pull rods (25) system pipe liners (26) cattle guard supporters (27) axle box distance pieces (28) horn box liners (29) brake hangers (30) fttm, rttm blowers (31) intermediate casings (32) after cooler housing (33) m6 turbo support (34) axle box covers and plates (35) fip supports (36) ms plates & angulars (37) carbody filters (38) ecc guards (39) cylinder head valves (40) push rods (41) derators (42) fasteners of different sizes of locomotive (43) ms plates (44) focus lights housing (45) other scrap items related to loco assorted scrap (46) centrifuge base (47) fuel oil headers (48) valve lever assembly (49) main bearing shells (50) connecting rods total qty: 80.000 mts (approx) as per ds-8. available at ferrous scrap yard , diesel loco shed, guntakal. ds-8 no: 053211050 dt.13.02.26. hsn code: 720429 - gst 18%. note to the bidders 1) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2) post auction no representation shall be entertained.3) for photos of this lot, kindly click on view lot image on bottom left side. 4) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description 5) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7) clubbing of the lots, what so ever, is not permitted for loading 8) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr. dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 9) railways does not guarantee for quality, quantity description etc.