Latest hydraulic brake hose Tenders | Government hydraulic brake hose Tenders

Central Government/Public Sector

CTN :39115640

22 Feb, 2025 NA

Multi City - Multi State

Tender For replacement of badly corroded angles, gusset plate of side pathway of br. no. 821up (4x18.30m), br. no. 970 up (10x18.30m) & br. no. 974 (18x18.30m) on lko-be section of mb division

CTN :39105310

04 Feb, 2025 11.32 Lacs

Multi City - Karnataka

Tender For supply of matrials for constraction of swm , unit in grama panchayat jummanakatti - mgnrea-jmk drilling equipment, mgnrea-jmk special gelatin, mgnrea-jmk detonators, mgnrea-jmk safety fuse wire, mgnrea-jmk drilling mechanic grade i, mgnrea-jmk licenced blaster, mgnrea-jmk add sundries charges at 1 % on material, mgnrea-jmk over head & other miscellaneous charges, mgnrea-jmk broken stone aggregate 40 mm size, mgnrea-jmk broken stone aggregate 20 mm size, mgnrea-jmk broken stone aggregate 12 mm to 10 mm size, mgnrea-jmk coarse sand (zone iii), mgnrea-jmk portland cement, mgnrea-jmk mixer (concrete) - 1 cum capacity, mgnrea-jmk add watering charges at 1 % on material, mgnrea-jmk super plasticizer admixture is marked as per 9-103-1999, mgnrea-jmk mason class ii (with tools), mgnrea-jmk hom of vibrator 0.71 days, mgnrea-jmksilver oak or equivalent planks 38 mm thick, mgnrea-jmk jungle wood runners and planks, mgnrea-jmk casurina poles 75 - 100 mm dia, mgnrea-jmk add handling , loading and unloading at 2% on material, mgnrea-jmk casurina poles 100 - 150 mm, mgnrea-jmk ms flat, mgnrea-jmk bolts and nuts, mgnrea-jmk add sundries charges at 2 % on material, mgnrea-jmk rubble stones, mgnrea-jmk bond stone 20 x 20 x 45 cm, mgnrea-jmkmixer (concrete small used in culvert), mgnrea-jmk size stone 20 x 20 x 25 cms, mgnrea-jmk boulders, mgnrea-jmk mason class i (with tools), mgnrea-jmk stone chistler class ii, mgnrea-jmk add sundries charges at 1 % on labour, mgnrea-jmkadd watering charges at 1 % on labour, mgnrea-jmk brick, mgnrea-jmk add handling , loading and unloading at 1% on material, mgnrea-jmk solid concrete blocks (40 x 20 x 20 cms)-4.00 n/sqmm, mgnrea-jmk add providing and removing scaffolding at 3% on labour, mgnrea-jmk water proofing cement paint, mgnrea-jmk add brush, putty, sand paper at 2% on cost of paint, mgnrea-jmk painter class i, mgnrea-jmkbroken granite metal 20 mm, mgnrea-jmk broken granite metal 10 mm, mgnrea-jmk mgnrea-jmk ms angle iron 50mm x 50mm x 6mm, 33.8 mtr in length at 4.5 kg per mtr, mgnrea-jmk ms angle iron 40mm x 40mm x 6mm, 23 mtr in length at 3.5 kg per mtr, mgnrea-jmk gusset plates 6 mm thick, mgnrea-jmk base plate / base plate, mgnrea-jmk anchor bolts 750mm, mgnrea-jmk corbon electrodes, mgnrea-jmk welder grade i, mgnrea-jmk hom of welding and grinding machine, mgnrea-jmk add, mgnrea-jmk hom of cutting and grinding machine, mgnrea-jmk ready mix primer paint (ready mix red lead paint), mgnrea-jmk add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, mgnrea-jmk enamel metal paint, mgnrea-jmk add brush at 1% on cost of paint, mgnrea-jmk tools & plants and electrical charges at 2%, mgnrea-jmk unit cost as per the specification, mgnrea-jmk enamel paint, mgnrea-jmk add brush, putty, sand paper, roller at 5% on cost of paint, mgnrea-jmk tmt bars fe 500, mgnrea-jmk binding wire, mgnrea-jmk orissa pattern of size 580x440mm with integral type foot rests, mgnrea-jmk 100mm s or p trap, mgnrea-jmk p.v.c. flushing cistern 10 ltslow level with fitting, mgnrea-jmk c.i. / m.s. brackets for flushing cistern, mgnrea-jmk g.i. 32mm dia telescopic flush pipes with fittings specials, mgnrea-jmk m.s. holder bat clamp 32mm, mgnrea-jmk g.i. overflow pipe 20mm dia, mgnrea-jmk special for overflow pipe, mgnrea-jmk mosquito proof coupling 25mm, mgnrea-jmk add white lead paint,gasket, cement, sand for making good the wall and floor at 2% on material

CTN :38811326

31 Jan, 2025 NA

Tiruvallur - Tamil Nadu

Tender For corrigendum : supply of snail/172.26. 003cb-2a - snail, flange, plate, plate, gusset plate, side frame r.h, side frame l.h, spiral, cover, flange

Central Government And Public Sector

CTN :39008516

10 Feb, 2025 NA

Guntur - Andhra Pradesh

Tender For design of overall tensile structure for canopy including membrane (fabric) & steel. supply offabricated steel as per design, erection, painting of steel structure & installation & tensioning ofmembrane (fabric). wind load of 44 m/s. 1.38 kn/sqm. designing, supply, fabrication &erection of structural steel works with necessary gusset plates, stiffener plates, brackets, bolts,cleats etc., including painting. structural frame shall be of factory fabricated from structuralsteel using standard make is 1239 pipes. yst240 the steel design shall be as per is code 800. allsegments of the assembly will be welded properly by mig weld & all sharp edges and cornersare grinded. the steel shall be enamel painted with two coats at site (with brush) over zincchromate primer for good finish. approved make: jindal/ appollo/ surya/ neuzone,designing, supply fabrication & installation of pvdf fabric to be used is serge ferrari, franceflexilight 902s2(950 gsm) of tensile strength 420/400 dan/5cm and 832s2(850 gsm) of tensilestrength 420/420dan/5cm. steel cables, endplates, tensioning hardware and all accessories .the fabric used for the tensile structure to be analyzed for its strength requirement andbehaviour in tensile engineering software ixcube and to be chosen after deriving throughanalysis. fabric pattering is done on ixcube software considering fabric prestress, structureform, welding joints and fabric elongation properties. all fabric patterns are plotted on fabricrolls by plotter and welded on high frequency welding machine in dust proof conditions. fabricwarranty period will be - 10 years. colour of fabric are white and grey approved make: sergeferrari, france flexilight 902s2(white color) & 832s2(grey colour) both sides pvdf coated pvcfabric.all structural wire rope shall be of 10 mm dia steel core galvanized 6/19, conforming to issteel cable manual requirement. end plate should be hot dip galvanized. all cables and endfitting shall be delivered clean & dry. swaged end fittings, tensioning hardware (viz. forkterminal, turn etc) are galvanized & painted.approved makes: usha martin/dp wirescomplete as per drawing for finished item of work and as directed by the engineer-in-charge

Central Government/Public Sector

CTN :39058926

06 Feb, 2025 NA

Vadodara - Gujarat

Tender For supply of bolster bottom gusset for boxnhl wagon

State Government

CTN :38952841

30 Jan, 2025 1.50 Crore

Balasinor - Gujarat

Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka balasinor under taluka panchayat, balasinor under mgnrega (annual unit rate) - 53 grade isi opc cement, 2, 467.28, cu.m., 1.000, screened gravel 12 mm size, 6, 178.42, cu.m., 1.000, rubble, 10, 90.62, kg, 1.000, white cement, 14, 57.63, cu.m., 1.000, hand broken stone aggregate 40 mm size to 63 mm size, 18, 39.83, 100 each, 1.000, g. i. plain washer, 22, 151.69, litre, 1.000, marble slab polished granite stone 20 to 25mm thick black, 26, 402.54, each, 1.000, r.c.c. heavy duty non-pressure pipe i.s.class np2-600 mm dia., 30, 3.18, rmt, 1.000, upvc sch 40 for cold water 40mm dia (1.1/2"), 34, 273.73, rmt, 1.000, structual steel m.s. channel,joints, tee, gusset plate etc., 38, 296.61, each, 1.000, white vitriousching wash down w.c. (european), 42, 39.62, sq.m., 1.000, pillar tap 15 mm dia., 46, 198.31, sq.m., 1.000, g. i. sheet 0.8 mm thick corrugated class-3, 50, 226.27

Central Government/Public Sector

CTN :39022859

14 Feb, 2025 NA

Multi City - Multi State

Tender For strengthening of badly corroded x-girder and replacement of badly corroded/perforated lateral bracing, cross frame, bottom cross lateral bracing, gusset plate of br. no. 1307 up & dn (5x30.5m) & replacement of top flange cover plate, x-frame, bracing and gusset plates of br. no. 1317 dn (4x18.30m) and provision of side pathway at br. no. 1307 up & dn (5x30.5m), br. no. 1317up & dn (4x18.30m) on sre-mb section & br. no. 219 up (3x22.87m) & 219 dn (4x18.30m) on dli -sre section over umb division.

Central Government/Public Sector

CTN :38960712

28 Jan, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of bolster bottom gusset for boxnhl (mbs) wagons to rdso drg. no. wd-09034-s-15, alt. 8, item no. 9. [ warranty period: 30 months after the date of delivery ]

CTN :38844369

05 Feb, 2025 NA

Liluah - West Bengal

Tender For supply of gusset plate 8x260x290 to icf's drg. no. t-1-2-524, item no-3, alt-w/9 (small w) [ war ranty period: 30 months after the date of delivery ]

Hydraulic Brake Hose Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector