Latest hydraulic lifting table Tenders | Government hydraulic lifting table Tenders

CTN :44913351

07 May, 2026 NA

Jamalpur - Bihar

Tender For design, manufacture, supply and commissioning of air leakage test bench along with hydraulic lifting table for air spring as per annexure a. the firm will use his own labour and tools/plants what so ever is required for execution of work. participant should have certificate of such type of work done in railways. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :44804249

21 Apr, 2026 29.63 Lacs

Delhi - Delhi

Tender For for the providing of building materials and execution the work under the work emergency repairs of the structures at the group of monuments, hauz khas, new delhi - material and work, un slacked lime (air tight packing/bass), river coarse sand free from clay, dust, foreign materials, surkhi of 1st class bricks free from clay, dust, foreign materials, belgiri dry, gur/ sheera (air tight packing/bass), gum, san, brick agg. (20 to 25 mm n/s)graded form, brick aggregate (10 to 20mm n/s) graded form, cr stone as per site incharge or site requirement, dq stone as per site incharge or site requirement, brickzira graded form, lakhori brick required size and shape, sun jute, pvc bucket standard size, pvc mug standard size, pvc water tank 500 liters isi marked, pvc pan (tasla), green net, pvc gum boot, pvc pipe 1.5" isi marked, work in progress board with ms angle iron 25x25x5 mm with 1mm ms sheet in both side of writing in hindi & english etc complete, pvc helmet for labour isi marked, safety jacket for labour isi marked, safety belt isi marked, pvc drum 200ltr, tell -tale as per site required, copper dowels (size 6inch), araldite standard epoxy adhesive (resin 1kg + hardener 800g), provision for photo documentation of conservation work before, during & after the execution of work in proper album two set, structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete., providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron y shaped placed 2.4m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer-in-charge, with reinforced barbed tape(r.b.t.) / spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of m.s. angle, c.c. blocks shall be paid separately){m}, earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge, dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead dismantling old lime plaster, disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge., "providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety feat

CTN :44821711

30 Apr, 2026 NA

Allahabad - Uttar Pradesh

Tender For supply of hydraulic aggregate ha 25-3v (pump) , oem pt no. 150- 200-003-004 , gear shift booster, oem pt no. 130-071-820- 294 , piston c/w cylinder ea-9k-07, oem pt no. 443-978- 710-107

CTN :44767631

27 Apr, 2026 NA

Allahabad - Uttar Pradesh

Tender For supply of 10531067 releif valve vpc 4a 7.4 bar , 10325619 sealing ring 12x16 , 10350106 synchromesh cone ii , 10302998 sealing ring 286x3 silicon rubber gr tse , 10519409 tapered roller bearing 32209a , 10331833 thrust ring , 10323483 dust seal boot , 10614936 bulb h4 24v 925946 , 10324801 window frame lh , 10324854 hydraulic aggregate ha 25 3v pump , 10614845 door filling rh , 10333402 tool box

Central Government/Public Sector

CTN :44720111

09 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms sheet of various sorts and sizes, blower rotary forging, liner, guide fixtures, side frame fixtures, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand, salary bin, cupboard, structural items, different type of packing channels, trolley, undersling water tank, sand box, flat, trough sheet, coach cut up parts, ms tank, grill gate, rolling shutter, bench test, wheel with plate, bins, roller of shutter, regulator empty box, sliding doors, dolley,platform shelter, engine base rail of demu, collapsible gate, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam with composite brake blocks, gi sheets, pipe 8"(ductile)inside thin layer of concrete in full pipe&negligible quantity of rubber beeding, square &rectangular tubes & galvanised sheets, ms grill gate,grill window &stair case handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt,ladder,plate,grill, barricade, bolts, nuts, tray under frame, cut rod, rails of various sorts and sizes with/without concrete/brick/mud adhering, cut rails or rails used in support structures, coach head stock, coach parts,battery tray, ladder, all types of trolley wheels with minor nfs attachments, screens, channel post, sheets, stand, track machine cut up parts, ms pipes covered with or without rope &with or without parts of rubber, dome, vrla rack, vcb in dismantled condition, vrla battery box & clamp, stand, dtmf way station equipment box, led line display board, hydraulic lifting table with available fittings, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, ci pipes and fittings, ms plate, roofsheets, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, ticket punching cut parts, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, s&t panels, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, tap changer cover with fiber attachments, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, mdb w/o non ferrous attachments, st light tubular post, gi/ms window, luggage rack, ,bed portion of weighing scale l with or without any minor non-ferrous attachments and all other scrap excluding ms hand hold in fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings in as is where is condition.pl no 98050126. note:(1) cutting is permitted to loadable size and for heavy nature items only. 2) during delivery if any major non-ferrous items found the same may be handed over to custodian. 3) jcb/crane loading permitted. location: behind a row bin 5 & 6

Central Government/Public Sector

CTN :44687368

13 Apr, 2026 2.75 Crore

Cuddapah - Andhra Pradesh

Tender For tender for supply of earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m , as directed by engineer-in-charge. all kinds of soil , filling available excavated earth (excluding rock) in trenches , plinth , sides of foundations etc. in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead up to 50 m and lift upto 1.5 m , complete as per directions of engineer-in-charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1-3-6 (1 cement - 3 coarse sand (zone-iii) -6 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement - all work up to plinth level 1-1.5-3 (1 cement - 1.5 coarse sand (zone-iii)- 3 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , steel reinforcement for r.c.c. work including straightening , cutting , bending , placing in position and binding all complete above plinth level and below plinth level.thermo-mechanically treated bars of grade fe-500d or 550d , complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and lifta) in foundations , footings , bases of columns , etc.complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and liftb) in superstructure columns , lintels , beams , plinth beams , roofs etc. , complete as per directions of engineer-in-charge. , dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete , complete as per directions of engineer-in-charge. , supplying and filling in plinth with sand under floors , including watering , ramming , consolidating and dressing complete , complete as per directions of engineer-in-charge. , demolishing r.c.c. work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge. , neat cement punning , providing and grouting of pockets with cementitious grout non shrink of approved make by suitable means free flowing pump curing etc complete as per directions of engineer in charge the payment shall be made on the basis of actual weight of approved grout used as per directions of engineer in charge , structural steel work riveted , bolted or welded in built up sections , and framed work like purlins , frames , trusses etc. including cutting , hoisting , fixing in position and applying two coats of synthetic enamel paint over a coat of approved steel primer , complete as per directions of engineer-in-charge.. , providing , laying and jointing glazed stoneware pipes of 150mm dia pipe of class sp1with stiff mixture of cement mortar in the proportion of 1ratio1 1 cement 1 fine sand including testing of joints etc complete as per directions of engineer in charge , constructing masonry chamber 120x120x100 cm inside , in brick work in cement mortar 1-4 (1 cement - 4 coarse sand) for sluice valve , with c.i. surface box 100 mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and rcc top slab 1-2-4 mix (1 cement - 2 coarse sand - 4 graded stone aggregate 20 mm nominal size) , ic necessary excavation , foundation concrete 1-5-10 (1 cement -5 fine sand - 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1-3 (1 cement - 3 coarse sand) 12 mm

Central Government/Public Sector

CTN :44679023

20 Apr, 2026 NA

Jabalpur - Madhya Pradesh

Tender For supply of hydraulic scissor lift capacity-2-ton manually operated heavy duty double acting highpressure hydraulic pump , control steering for eassy turning with pulling handle, hard chrome plated heavyduty ram for long life, honed cylinder, replacable oil seal, double scissior hydraulic lifting table, enamal paint finish, platform size 1220mm x 610 mm, closed height 350-450 mm, max lifting height from ground level 1900-2100 mm , heavy duty ci four wheel size 200-250 mm [ warranty period: 30 months after the date of delivery ]

CTN :44514963

30 Mar, 2026 NA

Chandigarh - Chandigarh

Tender For bid to ras supply of china wash down closed pan pedastal pattern , aggregate 50 mm , stone aggregate 20mm , viterous china squatting pan orrisa pattern size 580 x 440mm white , vitreous china wash basin white flat back size 500 x 400mm , aluminium handle 125 oblique 150mm , pvc pipe size 50mm , door seal 1200 mm long , gi female elbow 1 oblique 2 inch x 1 oblique 2 inch , white cement in 1 kg pack , road marking paint white , gi nipple 20 mm dia 2 inch long , gi nipple 15 mm dia 9 inch long , gi tee 20mm , gi nipple 15 mm dia 6 inch long , gi socket 15mm , gi elbow 20mm , gi tank nipple 15 mm , gi union 20mm , gi nipple 20 mm dia 6 inch long , gi nipple 15 mm dia 2 inch long , gi nipple 15 mm dia 4 inch long , gi nipple 20 mm dia 4 inch long , gi female tee 3 oblique 4 inch x 3 oblique 4 inch x 1 oblique 2 inch , wash basin flat back size 60 x 40 x 40 color white , vitreous china white counter top wash basin in square rectangular shape of standard size , pvc pipe size 75mm , pvc pipe size 100mm , wc orrisa type white vitreous , pvc bend size 75mm , bracket ss , e w c toilet seat s type europen pattern toilet seat vitreous china type srisht , pvc bend size 100mm , pvc bend size 50mm , gi socket 25mm , gi socket 20mm , gi reducing elbow 1 inch x 1 oblique 2 inch , gi tee size 1 oblique 2 inch dia , gi nipple 20 mm dia 9 inch long , m seal 90 oblique 110 , gi female elbow 3 oblique 4 inch x 3 oblique 4 inch , black nails 1 inch and 2 inch and 1 point 5 inch , screw wood steel 20mm , taplone tap , dhaga nos of pkt 10 nos , drill bit 100mm , hecksaw blad double ended , ms door spring , cp toilet paper holder , stainless steel peg set 5nos , screw wood steel 50mm , cp towel rack 600 mm , pvc connection 15 mm x 450 mm with brass nuts , cp soap dish , glass pane pin headed of 3 mm thick of 900 x 600 mm , plywood 7 fut x 3 fut x 12 mm , cp waste coupling 32 mm , gi union 25 mm , gi tubing 15 mm , liquid soap dispensear , cp towel rail 450 mm , beta valve 15 mm , gi union 15 mm , bathroom corner glass shelf 660 mm x 420 mm x 2028 mm , ply wood 8 fut x 4 fut x 6 mm bwp grade , cp curtain rod 25 mm dia , gi nipple 15 x 150 mm , gi tee 15 mm , gi union 20 mm , gi elbow 20 mm , pvc connection pipe 15 x 600 mm with brass nut , pvc waste pipe 32 x 800 mm , gi socket 20 mm , jumper valve brass with plastic washer for pillar cock 15mm , cp toilet paper holder , gi nipple 15 mm x 100 mm , flexible pipe 20 mm dia medium grade , m seal , glass pane plain 4 mm thick size 900 x 600 mm , stainless steel bracket for curtain pipe 25 mm , pvc pillar tap 15 mm , pvc bib cock long body 15mm with flange , glass pane plain 3 mm of size 1200 x 1200 mm , pvc bib cock 15 mm , gi tee reducer 20 x 15 mm , brackets for curtain rod cp 20 mm dia pipe , pvc gitti 1 point 5 inch 100 nos pkt , gi elbow 15 mm , gi socket 15 mm , gi bend 25 mm , gi nipple 20 x 150 mm , gi bend 20 mm , aluminium floor door stopper 140 mm , paint enamlled og , gi nipple 20 x 100 mm , flexible pipe 25 mm dia medium grade , brass spindle for 15mm bib cock , gi nipple 25 x 100 mm , cp curtain rod 20 mm dia 3.65 mtr long , floor drain traps jali 100 mm with hole , screw wood steel 35 x 8 swg , gi nipple 20 mm x 50 mm , pvc waste pipe 40 x 800 mm , paint enamlled white , gi bend 15 mm , gi nipple 50 x 15 mm , paint enamlled blue aquiren , paint enamlled red , nut and bolt with washer 10 mm dia , turpentine oil , silicone sealant in 280 ml , paint enamlled black , gi socket 25 mm , thinner in 1 ltr packing , brush painting 100 mm , paint brush 125 mm , brush painting 75 mm , brush painting 50 mm , brush painting 25 mm , door seal bottom , glass putty , gi pipe 15 mm dia medium grade //bid details 2 / 139 , hydraulic door closer aluminium , curtain rod end caps ss type 20 mm , curtain rod end caps ss type 25 mm

CTN :44590749

02 Jun, 2026 NA

Delhi - Delhi

Tender For procurement of spares for mi-17v5 helicopter - receiver, shaft-70, oxygen regulator, emergency floating system, bearing, transfer pump casing, alcohal tank, fdr cable with usb comi adapter, weather radar, power supply unit of vector m system, control rod assy, hydraulic system panel with aggregate, tail skid frame, hydraulic shaft, rod, casing, winch control box