Latest igniters Tenders | Government igniters Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

State Government

CTN :38600251

31 Dec, 2024 25.36 Lacs

Shimoga - Karnataka

Tender For dismantling of existing porcelain lightening arrestors, surge counters, cvts, acsr conductor, supporting porcelain insulators, supporting structures, complete form line side insulator to takeoff tower for 66kv shimoga bhadra lines 1, 66kv shimoga bhadra lines 2 and lh transmission lines.2)2)supply, erection, testing and commissioning of 3 nos. of 66kv transmission line equipments like cvts, polymeric lightening arrestors with surge counters, supporting polymeric insulator stacks, lynx acsr conductor, clamps, connectors, structure etc. complete from line side isolator to take off tower of 66kv transmission line equipments from line side isolator to take off tower at bhadra generating station.3.dismantling of existing 72.5kv, 0.5cl current transformers, supply, erection, testing and commissioning of 0.2 class, 72.5kv current transformers for 12mw river bed units 1 and 2 at bgs.4.supply of essential spare 04 nos. of 66kv polymeric insulator stack and 01 no. of 0.2cl 72.5kv current transformer.5.jungle clearance along the lines wherever necessary.6.the scope also includes testing at works before dispatch, pre-commissioning and commissioning tests at site and the performance guarantee tests in respect of 72.5kv cts, 60kv las, 72.5kv cvts required for bhadra generating station.7.the scope of supply shall include all accessories, marshalling box, terminal connectors, wedges, clamps, supporting structure etc., which are necessary for assembly and erection of ct, cvt & la.8.modifications required for foundation and support structures to erect newly supplied cts, cvts and las shall be carried out by contractor at no extra cost.

CTN :38582060

27 Dec, 2024 NA

Ganjam - Odisha

Tender For transportation of 245 kv 160 kn porcelain long rod insulator from store s/d choudwar to line s/d store bhanjanagar under eht (o&m) division, bhanjanagar and transportation of various materials from mancheswar store to 132/33 kv grid s/s, chatrapur under eht (o&m) division, chatrapur

CTN :38555933

03 Jan, 2025 NA

Siang - Arunachal Pradesh

Tender For supply of air filter , thermostat assy , fan belt auxiliar drive , master cylinder assy , slave cylinder assy , tie rod end outer , ball joint upper , ball joint lower , insulator engine front , hose brake lh frt , fuel line tank and filter , front wiper with imported rubber

State Government

CTN :38503384

31 Dec, 2024 72.24 Lacs

Medininagar - Jharkhand

Tender For supply of electric line materails - electrical items :, connector pipe to panther, connector panther to panther, connector panther to ab switch, connector pipe to ab switch, connector dog to ab switch, pg clamp for 80/100mm2 conductor, pg clamp for 232/150mm2 conductor, pg clamp(ring type) for 232/150mm2 conductor, led flood light out door with ip 66 protection rectangular (100 watt), al. winding wire, lt pin insulator with pin(porcelain type), lt pre-insulated mid span joint suitable 95mm 2 phase, insulation piercing connector for db charging, insulating piercing connector bracing suitable for t. joints, 33 kv disc insulator with fitting 90 kn (b&s) type polymer, 33 kv polymer type pin insulator with pin 10 kn, (nuts & washer), 33 kv post insulator, 33 kv fuse set, 11 kv (b&s type) disc insulator with fitting polymer, 70 kn, 11 kv polymer type pin insulator with pin 5 kn nuts & washer type, 11 kv fuse set, suitable lungs, suspension clamp (assembly suitable up to 70-85 sq mm bare messenger including 1 no suspension clamp with bracket two meter stainless steel strap & 2 no ss buckle), spring loaded (distribution bus bar insulated box for fixing on pole suitable for ab xlpe cable and three phase connection 1 incoming & 3 outgoing 3 phase connection as per field requirement), dead end bracket suitable above 70 sq mm bare messenger including 1 no dead end bracket + i no dead end +2 mtr ss strap + 2 nos ss buckle.(minimum braking load 15 kn), jointing sleeve suitable for 150-232 sq mm, lt shackle insulator with strap porcelain type

State Government

CTN :38503386

31 Dec, 2024 30.87 Lacs

Medininagar - Jharkhand

Tender For supply of electric materials under electric supply area medininagar - electrical items :, 33kv v cross arm (100x50x6mm galvanized 19.7 kg), 33kv line dp channel (100x50x6m galvanized 65.2 kg), 33kv pole top bracket (50x10mm galvanized 2.5 kg), 33 back/support clamp for v cross/top (1.6 kg each 50x10 mm galvanized), 33kv g i stay set (1900x20mm) complete with stay wire 7/10 galvanized and guy insulator, 11kv v cross arm (75x40x6mm galvanized 14.6 kg), 11kv line dp channel (75x40x6mm galvanized 41.3 kg), 11kv pole top bracket (50x8mm galvanized 2.2 kg), 11kv back clamp for v,top,dp (50x6mm galvanized 3 kg), 11 kv g.i stay set (1800x16mm) with stay wire 7/10 galvanized and guy insulator, channel for transformer base (100x50x6mm galvanized 52.63 kg), channel for transformer hg fuse set (75x40x6mm galvanized 19.3 kg), channel for transformer ab switch (100x50x6mm galvanized 52.63 kg), tr. belting (50x50x6mm) with support (40x40x6mm galvanized 52.3 kg), lt stay set (1700x16mm) complete with stay wire 7/12 galvanized, earth clamp for earth wire (50x6mm galvanized 1.8 kg), angle/side stay clamp (50x6mm galvanized 1.08 kg), lt angle bracket (50x50x6mm galvanized 4.75 kg), lt back clamp for lt angle (50x6mm galvanized 1.1 kg), m/s nuts & bolts (10 x5/8 half thread), m/s nuts & bolts (8 x5/8 half thread), m/s nuts & bolts (5 x5/8 full thread), m/s nuts & bolts (3 x5/8 full thread), m/s nuts & bolts (2 x5/8 full thread), clamp for dss as per field req. (50x6mm galvanized 3.2 kg), spike earthing made of (20 mm gi solid rod

CTN :38526292

08 Jan, 2025 39.38 Crore

Jaipur - Rajasthan

Tender For segregation of 11 kv mixed feeders at tonk circles of jaipur discom of rajasthan state under revamped reforms-based and results linked distribution sector scheme (rdss) on turnkey basis against tn-583 - pcc poles, pcc pole 9 mtrs long (400 kg), pcc pole 9 mtrs long (200 kg), outdoor 11 kv o/d vcb kiosk complete with accessories including use of special tools, armoured cable of size 2c x 4 sq.mm. 1100 volts pvc insulated including supplyof ferrules, control cable of size 12c x 2.5 sq.mm. 1100 volts pvc insulated including supply of ferrules, overhead steel cored aluminum acsr dog[100sqmm(6+7) /(4.72+1.57)] conductor complete in all respect as per latest specification and drawing, overhead steel cored aluminum acsr rabbit conductor in all respect, earthing rod sets for s/s made with ms rod (galvanized ) 20 mm dia, 3 meter length with gi wire and clamp as per latest specification and drawing adopted & approved by nigam., ctpt structure set (galvanized), 11kv ct pt set(200/5 amp.), mip meter box for meter with ttb, go double break without eb isolator on existing bracket complete in all respect as required including hardware, nut, bolts & washer etc., 11kv ( with 9 x 24 kv post insulator ) 400 amp., horn gap sets on existing brackets in all respect as required including hardware nut & bolt & washer etc., 11kv ( with 6 x 24 kv post insulator ) 1 set=3 nos, supply of insulators, 11kv porcelain disc.insulators b&s type 45kn, hardware for 11kv disc insulator b&s type 45kn, composite polymer insulators, 11kv polymer disc.insulators t&c type 45kn, hardware for 11kv disc insulator t&c type 45kn, 11 kv composite polymer pin insulator complete in all respect, pg clamps for suitable acsr dog conductor, pg clamps for suitable acsr rabbit conductor, 11 kv danger plate of size 200 x 250 mm complete in all respect, supply of angle and channel, m.s channel 100x50x6 mm, m.s channel 75x40x6 mm, m.s. flat 50 x 6 mm (galvanized), 1.4 mtr channel bracket with clamp, supply of lightening arrestors, substation type 9kv, 10ka station class (1set=3 nos.) lightening arrestors., 11kv double pole line structure set for cut point complete on existing poles in all respect with clamp, as required made from m.s.channel 100 x 50 x ismc ( 9.56 kg. per mtr.) isa m.s.angle 65 x 65 x 6 mm, m.s.angle 50 x 50 x 6 mm and m.s.flat 50 x 6 mm (galvanized as per is), gi stay set (galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300x300x4 mm,12 mm dia turn buckle) including stay clamps,, strain/guy insulator for stay set, 7/10 swg gi stay wire, gi wire 8swg, underground cable for working voltage of 11kv aluminium conductor (is 7098) cable xlpe armoured, under ground cable of size 3x185 sq.mm for 11 kv, g.i. pipe of 125 mm diameter, b-class (is:1239 mark), gi pipe for cable support at pole ( each 3.3 mtr ), cable for11 kv aluminum conductor xlpe armoured ht cable, xlpe 3x185 sq.mm h.s. on indoor type, xlpe 3x185 sq.mm h.s. on outdoor type, xlpe 3x185 sq.mm h.s.s.t. joint, 11.4 mtr. long lattice tower made of 50 x 50 x 6 mm m.s. angle with 50 x 6 mm m.s. flat for bracing as per nigam specification, 11kv cross arm with top hamper with clamps made of ms angle 65x65x6mm, clamp 50x6 mm, earth clamp 50x6 mm (galvanized), fixing of 11/0.4 kv substation structure set for three phase 63 kva transformer on double poles in all respect. weight (as per specification and drawing with go channel) approx=219.54 kg (all galvanized as per relevant is), 11 /0.4 kv al wound, three phase distribution transformer (completely self protected with provision of lt bushing box), 25 kva, 63 kva, 6.35/0.24kv s/s structure set for single phase transformer on single 9mtr, 400kg pcc pole in all respects., 11kv 100 amp drop out cum isolator with 3.0 amp. fuse & 12 kv post insulators., lt xlpe cable, size 4cx70 sq. mm, size 4cx120 sq. mm, aerial bunched cable, aerial bunched cable 3cx25+1x25 sqmm, aerial bunched cable 3cx50+1x35 sqmm, lt distribution pillar

State Government

CTN :38535207

23 Dec, 2024 3.52 Lacs

East Nimar - Madhya Pradesh

Tender For procurement of ss braided flexible hoses for ldo/hfo oil gun igniters and flame scanner hoses assembly installed in bmd area at 2x660 mw sstpp,mppgcl dongalia

Central Government/Public Sector

CTN :38491070

18 Dec, 2024 4.97 Lacs

Dhanbad - Jharkhand

Tender For repairing, overhauling of 6.6 kv overhead line and associated items , pin insulator, disc insulator of different feeder i.e. receiving pit, lagoon feeder, loading complex including earth pit maint. and transformer painting works at madhuban coal w