Tender For supply of qube kit tmr t/o 4p comp (consisting of compensated qube-o for celox or carbon application, charging , front lance pipe for celox. part no. 66300105 , contact block celox 4 core. part no. 10804662 , mi cable 4.5 mtrs 4 core for celox. part no. 61832261
Tender For supply, installation, testing and commissioning of various electric item on annual rate contract - supply of din rail mounting contactor and accessories confirming to iec 61095 with following description and configuration in existing distribution board / sheet including making connections, testing etc. as required.oem shall have submit nabl / cpri / erda accrediated lab type test reports & all as per pre approved by engineer in charge.for additional technical parameters of product / work refer annexure a attached with this bsr modular contactor 40a - 3no, supply of wiring for sub mains isi marked (is:694) 1100 volts grade pvc insulated flat twin core sheathed solid aluminium conductor as required. for additional technical parameters of product / work refer annexure a attached with this bsr4.0 sq.mm, 6.0 sq.mm, 10.0 sq.mm, supply of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and ac1 rating of 16-20 mperes including making connection, programming conforming to iec 0730-1 and 60730-2-7 etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer exure "a" attached with this bsr.one day & week reserve (analog type ), one day & week reserve (digital type ), supply of 240/415 v ac mcb with positive isolation of 10 ka breaking capacity (b/ c/d tripping characteristic as per type of load and site requirement) 4 kv impulse withstand voltage, isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , ip 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 a rating and 10,000 upto 63 a, 5000 for 80 a & above rating including making onnections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab type test reports & all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr. single pole mcb (with b/c curve tripping characteristics) 0.5 a to 5 a rating, 6 a to 32 a rating, 40 a rating, 63 a rating, providing & fixing of 240/415 v isolator isi marked is:13947- iii/conforming to iec 60947-3, suitable for ac22a utilization category, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering overall poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. ip 20 contact protection and fitted in existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab type test reports & all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr. double pole isolator 30 a / 40 a rating, 63 a rating, triple pole isolator 40 a rating, 63 a rating, sitc of single stage, water cooled, high speed (2880 rpm), horizontal, centrifugal, openwell submersible pumps set pre filled with coolent water and fitted with mechanical seal - t/c vs t/c, thrust bearing shall be of carbon + s.s.the stator body of single phase pump shall be of ss and rest of all shall be of cast iron. all casting parts should be cathod electro deposition (ced) coated and other construction material should be confirming to is : 14220: 2018 . the overall performance of pump shall confirm to bee energy efficiency level of 3 star. valid bee certificate from oem must be submitted for the same. motor should be ie2 class as per iec 60034-2-1: 2007, iec 60034-30: 2008, & is12615:2011, including making connection etc as required complete in all respect. oem shall have submit nabl / cpri / erda accrediated lab type test certificate before executio
Tender For ortho implants-, femur interlocking nail diameter 8-13 mm and length 32-46cm (1cm difference) with four locking screws and carbon zig, , dfn (distal femoral nail) diameter 8-13 mm and length 32-44 cm with locking screws all size and zig, , pfn nail short all size with locking screw all size and carbon zig, , pfn nail long all size with locking screw all size and carbon zig, , proximal femoral nail antirotation (pfna-ii) nail all size with locking screw all size and carbon zig, , tibia interlocking nail - diameter 8-12 mm and length 28-40cm with four locking screws carbon zig (titanium& ss, , expert tibia interlocking nail diameter 8-12 mm and length 28-38cm (1cm difference with for locking screws and carbon zig (titanium& ss, , humerus interlocking nail diameter 6-9 mm length 22-36cm (1cm difference) with four locking screws carbon zig (titanium& ss, , 1/3 tubular plate 3.5 mm hole size 4-14 with compatible screw cortical or cancellous partially or fully th any size and number as per pate holes. (titanium& ss, , semi-tubular plate 4-14 with compatible screw cortical or cancellous partially or fully threaded any size number as per pate holes. (titanium&ss, , low contact small d.c.p- 3.5 mm hole size 5-14 with compatible screw cortical or cancellous partially threaded any size and number as per pate holes. (titanium&ss, , low contact narrow d.c.p- 4.5 mm hole size 5-14 with compatible screw cortical or cancellous partiall fully threaded any size and number as per pate holes. (titanium&ss, , t-plate 2.7mm 3-12 holes with compatible screw cortical or cancellous partially or fully threaded any siz number as per pate holes. (titanium&ss, , t-plate 3.5mm 3-14 holes with compatible screw cortical or cancellous partially or fully threaded any siz number as per pate holes. (titanium&ss, , t-locking plate 3.5mm 3-14 holes with screw cortical or cancellous partially or fully threaded any size number as per pate holes. (titanium&ss, , t-oblique locking plate 3.5mm 3-12 holes with compatible screws, cortical and cancellous, partially of 1, , threaded (any size and number, as per plate holes) (titanium&ss, , locking compression plate 3.5 mm for l/e radius (volar plate) with head hole 3 and 5, compatible screws, cortical concellous, partially of fully threaded (any size and number, as per plate holes) titanium&ss, , locking compression plate 3.5 mm for l/e radius (dorsal plate) with head hole 3 and 5, compatible sc cortical and concellous, partially of fully threaded (any size and number, as per plate holes) titanium&ss, , recon reconstruction plate 3.5 mm hole size 4-14 with compatible screw cortical or cancellous partially fully threaded any size and number as per plate holes. (titanium&ss, , recon reconstruction plate. 4.5 mm hole size 4-14 with compatible screw cortical or cancellous partiall-fully threaded any size and number as per plate holes. (titanium&ss, , locking reconstruction plate 3.5 mm hole size 4-14 with compatible screw cortical or cancellous partial fully threaded any size and number as per pate holes. (titanium&ss), , locking reconstruction plate 4.5 mm hole size 4-14 with compatible screw cortical or cancellous partial fully threaded any size and number as per plate holes. (titanium&ss, , anatomical locking plate for distal humerus 4-14 holes with compatible cortical, cancellous and locking screws any number and size as per plate hole (titanium&ss), , ?-plate for distal humerus 4-14 holes with compatible cortical, cancellous and locking screws any numb size as per plate hole (titanium&ss) ?, , chief medical officer, , , , 5. lateral locking plate for distal humerus 4-14 holes with compatible cortical, cancellous and locking screws any number and size as per plate hole (titanium&ss), , 7. locking olecranon plate (lt. & rt. with 3-14 holes) (titanium&ss), , 8. locking.d.c.p. small 3.5 mm 4-14 holes with compatible screw cortical or cance