Tender For supply of provision of furniture and misc items at bahadurgarh railway station under amrit stations scheme--providing and placing of 2 seater sofa. overall size of 2 seater sofa: 1460mm(w) x 905mm(d) x 855mm(h) x450mm(sh). the seat shall be made of pu foam with density 28 2 kg/cu.mtr having an additional top layer ofsupersoft pu foam with density 32 2 kg/cu. seat shall be upholstered with fabric or leatherette. back foam: theback shall be made of pu foam with density 28 2 kg/cu. mtr with two additional top layer of supersoft foam ofdensity 322 kg/cu. mtr, upholstered with fabric or leatherette. understructure shall be made up of 1.20.1 cm.thick hot pressed plywood (which also shall be resistance and termite proof as per is:303.) and pinewood of crosssection deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly ismounted over understrucrure for cushioning effect. it shall be a welded assembly made in stainless steel (grade ss202) tube & plate with plastic endcap. certification: the company should be iso-9001, 14001, 45001, bifmamembership and aiota certified. the item should be as per certifications and specifications as per the directionof engineer-in-chargeproviding and placing of 3 seater sofa. overall size of 3 seater sofa: 2060mm(w) x 905mm(d) x 855mm(h) x450mm(sh). the seat shall be made of pu foam with density 28 2 kg/cu.mtr having an additional top layer ofsupersoft pu foam with density 32 2 kg/cu. seat shall be upholstered with fabric or leatherette. back foam: theback shall be made of pu foam with density 28 2 kg/cu. mtr with two additional top layer of supersoft foam ofdensity 322 kg/cu. mtr, upholstered with fabric or leatherette. understructure shall be made up of 1.20.1 cm.thick hot pressed plywood (which also shall be resistance and termite proof as per is:303.) and pinewood of crosssection deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly ismounted over understrucrure for cushioning effect. it shall be a welded assembly made in stainless steel (grade ss202) tube & plate with plastic endcap. certification: the company should be iso-9001, 14001, 45001, bifmamembership and aiota certified. the item should be as per certifications and specifications as per the directionof engineer-in-charge.6 each3providing and placing in position of center table. the top shall be made of which shall be 12+/-0.3mm thick blacktinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. it shall be awelded assembly made in ss202 grade having dia. 12+/-0.04 as per is:1762. overall dimensions of table shall bewidth of table- 1120 mm, depth-600 mm, height-351 mm. certification: the company should be iso-9001,14001, 45001, bifma membership and aiota certified. the item should be as per certifications andspecifications as per the direction of engineer-in-charge.4 each4providing and placing in positon of corner table. the glass shall be 12+/-0.3mm thick black tinted toughened glassuv glued with bushes made in ss 202 grade for fixing with understructure. it shall be a welded assemblymade in ss202 grade having dia. 12+/-0.04 as per is:1762. overall dimensions of table shall be width of table=60.0 cm, depth=60.0 cm, height=35.1 cm. certification: the company should be iso-9001, 14001, 45001, bifmamembership and aiota certified. the item should be as per certifications and specifications as per the directionof engineer-in-charge.3 each5providing and placing overall size of the table shall be 1800mm(w) x 900mm(d) x 750mm(h) & side table1200mm(l) x 500mm(d) x 750mm(h). the table is made of 25 mm thick mdf one side pre-laminate boardconfirming to is-14587:1998 with 0.4 mm pvc membrane pressed on to top. soft closing access flap within-buildpower box are provided on work surface for wire management. the eru top is made of 25 mm thick mdf oneside pre-laminate board confirming to is-14587:1998 with 0.4mm pvc m
Tender For supply, installation, testing and commissioning of flight informationdisplaysystem (fids)along with active led for the t1 upgrade project at kempegowda international airport, bengaluru
Tender For l-shaped counter table supply to over telangana,maharastra, karnataka states with the following specific ations. main worktop: made of 25mm thick pre-laminated board(plb) of e1-p@ grade and approved shade confirming to is-12823:1990, edge banded with matching 2mm thick pvc lipping. access flap provided on work surface for wire mana gement. return worktop: made of 25mm thick pre-laminated board(plb) of e1-p2 grade and approved shade confirmin g to is-12823-1990, edge banded with matching 2mm thick pvc lipping. modesty pane:made of 18mm thick pre-lamina ted board(plb) of e1-p2 grade and approved shade confirming to is-12823-1990, edge banded with matching 2mm thic k pvc lipping. legs: cube legs are fabricated from ms erw tube of 50mm x 25mm x 1.2 mm thick and 40mm x 40mm x 1.2mm thick ( as peri s:7138). at the top surface of legs, support brackets of 3mm thick hr ( as per is:2062) are weld ed for fixing work shop. these are welded together by argo shiled welding. this welded structure is coated with 50micro n epoxy polyster coating. at the base, a plastic cap with m8 molded insert is fixed, on to which a straight m8 leveler fitte d which allows for adjustment of the height upto 50mm. cross members; cross members in unitized t-2 desk series are made from 50mm x 25mm x 1.2mm thick erw tube ( as per is:7138) these are coated with 50microns epoxy polyster c oating. cross members are assembled by friction fit pdc joinery abd grubscrews. there are always two cross members f or one table. access flap:soft closing access flap is used in unitized t-2 desk series. provision for standard size of 8 mo dule electrical (anchor roma) is offered.access flap is made from alumunium extension, pdc parts made from aluminiu m alloy and plastic parts are made from nylon 6 and wire brush with nylon bristles. power box: power box made with 0. 8mm thick crca (is:513), with switch plate (8 module cutout provision for anchor roma). this is fixed with workshop al ong the depth of access flap position. integrated hinge door storage with drawer: made of 18mm thick pre-laminated t win board of e-1 to p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2mm thick pvc lipping. door is fixed with slide on hinges and handles is providedfor ease of mpening drawer is provided with ebco meta box slide and lock for security. certification: green guard, green pro, indoor air quality, griha certified. make pre ferable: godrej/wipro/damaro ]