Latest infrastructure services Tenders | Government infrastructure services Tenders

CTN :42973103

15 Dec, 2025 26.98 Lacs

Panipat - Haryana

Tender For corrigendum : carrying out injection grouting works per eil standard specification for arresting of leaks in concrete structures at cooling tower 2 and manholes for piling ug piping civil and strl work uando part b panipat refinery expansion project of iocl

State Government

CTN :43131709

29 Dec, 2025 46.11 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For improvement of igo phey canal by way of strengthening of main canal and distributor channels including pitching and grouting and extension of distributor chanal cross drainage for igo phey canal by way pf repair to lining of canal between d8 to d12

State Government

CTN :43131710

29 Dec, 2025 56.47 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For improvement of igo phey canal by way of strengthening of main canal and distributor channels including pitching and grouting and extension of distributor chanal cross drainage for igo phey canal by way pf repair to lining of canal between d4 to d8

CTN :43116278

30 Dec, 2025 NA

Nagpur - Maharashtra

Tender For box culvert structural design over natural drain d d = excavation for foundation in earth, soils of all types, sand, gravel, soft murum , providing and laying in situ ready mix controlled grade of m 15 , providing and laying in situ ready mix controlled grade of m20 , providing and laying in situ ready mix m 30 , providing and laying in situ ready mix m 30 cement , providing and laying in situ ready mix m 30 controlled cement concrete , providing and laying in situ ready mix m 30 plain cement concrete , providing, cutting, bending, hooking, tying and laying in position tmt fe 500 , providing reinforced cement concrete crash barrier , providing and applying synthetic enamel paint to crash barrier , providing and laying of filter media with granular materials stone crushed aggregates , providing and laying weep holes of 100 mm dia , providing and laying in-situ m40 grade unreinforced plain cement , providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete. , providing and laying filter material underneath pitching in slopes as per drawings and technical specifications etc. complete. , providing and laying pitching on slopes laid over prepared filter media , plain cement concrete 1 is to 3 is to 6 nominal mix in grouting appron , providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40kilogrameach complete as per drawings , back filling behind abutment, wing wall and return wall

State Government

CTN :43111339

23 Dec, 2025 23.43 Lacs

Multi City - Telangana

Tender For tggenco 5x800mw ytps supply laying and fixing of ms plates clamps bolts and grouting below rails at loco sheds wagon tipplerslocated in the marshalling yard of yadadri thermal power stationveerlapalem v dameracherla m nalgonda district

State Government

CTN :43114946

30 Dec, 2025 2.08 Crore

Delhi - Delhi

Tender For core cutting and grouting of anchor bolts/plate screws in mainline/depots strengthening of track plinths in mainline and depots of line-1, 2, 5 and 7 of dmrc network.

State Government

CTN :43117029

17 Dec, 2025 NA

Delhi - Delhi

Tender For sic of submersible pump set and all allied e/m equipment for rebored tube well near h.no.-116c shahpur jat in greater kailash constituency ac-50. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 10 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point:200 lpm on 90 mtr. head. having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved make, supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted.a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no.b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 noc) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no.e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable bankingg) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos. complete wiring & installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated & pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs.make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., s/o nut & bolts of 1/2 dia of different size i.e. 1.5 dia& 2.5 long full threaded., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 8-10 inch diameter made out from 6mm thick m.s. sheet in 2 halves & a circular hole in centre 3-1/2 dia. with locking arrangement by nuts & bolt., earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

State Government

CTN :43130373

23 Dec, 2025 NA

Multi City - Punjab

Tender For filling of cavities behind cc lining slabs bycoarse sand grouting in between bypass ofph-v to rd 1846 m on both sides of mhc-iiduring the year 2025-26 tender document

State Government

CTN :43115651

23 Dec, 2025 NA

Multi City - Punjab

Tender For to prevent leakage of cross drainages at variouslocations by filling of cavities behind lining bycoarse sand grouting at rd11444m & rd13225mof mhc-i during 2025-26. tender document

CTN :43033958

11 Dec, 2025 NA

Mahamayanagar - Uttar Pradesh

Tender For the work of shifting of line full deposite scheem at various place under edd-sadabad hathras. - safe carriage of following material from electricty store center hts to pit site of work through the kacha and pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, t&p, etc. which required for proper completion of work.(distance 00-50 kms.), 8.5/9 mtr. long pcc poles., 9/11 mtr. s.t. poles, acsr weasel conductor, earthing complete, shackle insulator, stay set complete, teoff channel, 33/11 kv pin insulator with pin, disc insulator with disc fitting, f bracket, 11 kv x-arm, 50/95/120 sqmm. ab cable, suspension clamp, dead end clamp, distribution box with clamp, pearcing connector, guarding angle with clamp, g.i wire 6/8/10 swg, neutral cum earth wire, cable jointing kit, 11 kv xlpe cable, 25 kva t/f, 63 kva t/f, 100 kva t/f, errection of following poles including cutting of kharanja/mettalic road/concrete portion while digging pit & complete h.t./l.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t&p and carrier etc. required for proper completion of work., pcc poles 8.5/9 mtr., stp 9.0/11 mtr., errection and grouting of stays as per respo norms and as per direction of supervising engineer. grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost., fixing of earthing rod as per respo norms and as per direction of supervising engineer., safe installation of following new/repaired cousted t/f on newly constructed double pole in proper alignment direction & making all ht/lt connection., 25 kva t/f, 63 kva t/f, 100 kva t/f, laying, sagging and stringing and jumpering / binding etc. of new & old acsr weasal conductor / gi in 11 kv / lt lines as per respo manual and as per direction of supervising engineer., acsr weasal conductor, 50/95/120 sqmm. ab cable, xlpe cable, providing & fixing of following clamps, 11 kv x arms clamps for stp/pcc pole, nut,bolt & washer, 11 kv f clamp for stp/pcc pole, earthwire clamps, lt clamp with nut & bolt, cable jointing kit, cutting, chopping, triming of tree branches to clear the line route to give 2 mtr. horizontal and vertical clearance to the line coming in the route of different feeders as per direction of supervising engineer, guarding/reguarding of 11 kv line by laying, stringing, sagging and binding of 2 nos. parallel gi wire 6 swg after providing, fabrication and fixing of guarding angle and fabrication and fixing of x-guards (tillis) of gi wire at distance of 3 mtr., installation of extra t on the erected poles wherever required alongwith all fitting as per direction of supervising engineer including the cost of labour, t&p etc, required for proper completion of work. the "t" pole shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of material., dismentlling and removal of existing line from the various area, dismentlling of pole stp/pcc, back cartage, acsr weasel conductor scrap, iron scrap

Infrastructure Services Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government

State Government