Latest insert plate Tenders | Government insert plate Tenders

Central Government/Public Sector

CTN :38208521

10 Dec, 2024 NA

Jodhpur - Rajasthan

Tender For supply of high tensile hex head bolt with full threads size: 12x50 mm with one nut, double plate was her, one spring washer and one nyloc nut conforming to is:1367(pt-14) sec 1, 2023, gr. a2, pr-class-70 ( stainless steel i.e. ss-304)make-tvs, lps, unbrako or equivalent [ warranty period: 30 months after t he date of delivery ]

Central Government/Public Sector

CTN :38005126

18 Nov, 2024 45.72 Lacs

Mundra - Gujarat

Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa

Central Government/Public Sector

CTN :38190236

25 Nov, 2024 NA

Pune - Maharashtra

Tender For supply of stainless steel plate to size 1250x6000x4mm as per rdso spec.no. irs: m44/97 suitable for boxn hl wagon. [ warranty period: 30 months after the date of delivery ]

Corporations And Associations And Others

CTN :36342958

04 Dec, 2024 NA

Panipat - Haryana

Tender For corrigendum : supply of ash handling spares for ptps panipat - "ash handling system spares item name:check valve size:2 in part number:a-103 assembly: material handling valve,size:8 x 6 in equipment: fly ash make:indure model:for 210 mw, additional information:for air inlet,same for 250mw,600mw, valve butterfly type:wafer size:300 mm pressure rating: class 150 end connection:not available body & bonnet material/spec:cast iron disc material:ductile iron seat material:nilon coated epdm operating type:manually gear operated, valve butterfly type:wafer size:150 mm pressure rating: 10kg/cm2,class 150 end connection:flanged body & bonnet material/spec:mild steel disc material:ductile iron operating type:manually gear operated length:82 mm indian standard:is:13095 , valve butterfly type:wafer size:200 mm pressure rating :10kg/cm2,class 150 end connection:flanged body & bonnet material/spec:mild steel disc material:ductile iron operating type:manually gear operated length:82 mm indian standard:is:13095 , valve gate size:50 mm pressure rating:class 150 body & bonnet material/spec:bronze end connection:screwed additional information: is778ci2,rising spindle,os&y,body bonnet dicsis318gr2,stem h.t.brass body seat ring is318gr2 , "valve gate type:not available size:25 mm pressure rating:not available body & bonnet material/spec:bronze end connection:screwed , "valve gate type:rising spindle size:15 mm body & bonnet material/spec:bronze end connection :screwed operating type:manually isolating, "valve gate type:rising spindle size:20 mm body & bonnet material/spec:bronze end connection: screwed operating type:manually isolating, valve gate type:rising spindle size:40 mm pressure rating :class 150 body & bonnet material/spec:bronze end connection:screwed operating type:manual, "valve gate type:knife size:300 mm pressure rating:12 kg/cm2, class:150 body & bonnet material/spec:cast iron stem & trim material / spec:moc of plate:ss-304 end onnection:flanged, operating type:manual additional information:suitable for fly ash, valve gate type:knife size:200 mm pressure rating:12 kg/cm2, class:150 body & bonnet material/spec:cast iron stem & trim material / spec:moc of plate:ss-304 end connection:flanged operating type:manual additional information:suitable for fly ash, "valve gate type:rising spindle size:80 mm pressure rating: class 125 body & bonnet material/spec:cast iron stem & trim material / spec:steel/aisi1410 seat material:stainless steel, end connection:flanged operating type:manual, valve gate type:o,s & y size:100 mm pressure rating:asa 125 body & bonnet material/spec:cast iron stem & trim material / spec:aisi:410 seat material: 13% cr steel end connection: flanged operating type:hand additional information:rising spindle,flanges as per bs-10 table "f", "valve spares item name:gland follower & packing part number:kgv300823/7 equipment:control valve make:galaxy , size of valve:300 mm

CTN :37998624

20 Nov, 2024 NA

Panaji - Goa

Tender For corrigendum : supply installation and commissioning of lab. equipment for mechanical engg dept - separating & throttling calorimeter with mini boilerfeatures: determining the vapour content usingo a separating calorimeter with cyclone water separatoro a throttling calorimeter with vapour depressurization using an h-s diagramspecifications:supplied vapour temperature: 240 c pressure: 10barsafety valve: 10barmeasuring ranges temperature: 0 400 c pressure (inlet): 0 16bar pressure (outlet): -150 100mbar230v, 50hz, 1 phase230v, 60hz, 1 phase120v, 60hz, 1 phasedimensions and weight: l x w x h: 800x 800 x 1700 mm weight (approx.): 110 kg, steam turbine power plant setupfeatures steam power plant and its components start-up, operation and shut down of a steam power plant closed steam-water circuit with feed water treatment among others, determining:o boiler efficiencyo mechanical/thermal efficiency of the turbineo condenser efficiencyo specific fuel consumption of the plantspecificationsteam generator steam output: 200kg/h at 11bar fuel consumption: 12l/h heat-up time: 8min pressure: 13barsuper heater power: 7kwsingle-stage axial turbine with curtis wheel and hydraulic speed regulator power: max. 1,5kw at 3000min-1water-cooled condenser cooling capacity: 98kw transfer surface: 2,5m2measuring ranges temperature: 9x 0 400 c, 2x 0 100 c flow rate: 0 167l/min (cooling water) pressure: 3x 0 16bar, 1x 1bar torque: 0 20nm speed: 0 4000min-1400v, 50hz, 3 phases400v, 60hz, 3 phases, 230v, 60hz, 3 phasesdimensions and weight l x w x h: 3500x 2500 x 2250 mmweight (approx.): 2250 kg, rotary air compressor test benchfeatures: to study all components/accessories used in rotary air compressor. to study & determine isentropic work, actual work volumetric efficiency, isentropic efficiency & free air delivery at different delivery pressure. to plot volumetric efficiency/isentropic efficiency against delivery pressure & comment on the nature of the plot.observations can be taken by air compressed in storage& free condition. instrumentation: sensors with digital displays software for data acquisition via usbspecifications: vane compressor rotary compressor, driven by 3 hp motor. calibrated orifice meter with water manometer to measure air intake. energy meter to measure input of the meter. pressure gauge to measure discharge pressure. control valve at delivery side. stop clock.dimensions and weight: l x w x h: 1500x 1500 x 1250 mmweight (approx.): 320kg, marcet boiler test apparatusfeatures: recording the vapour pressure curve of water presentation of the relationship between pressure and temperature in a closed system temperature and pressure measurementspecification:bourdon tube pressure gauge: -1 24bartemperature limiter: 200 csafety valve: 20barheater: 2kwboiler, stainless steel: 2lmeasuring ranges temperature: 0 200 c pressure: 0 20bar230v, 50hz, 1 phase230v, 60hz, 1 phase120v, 60hz, 1 phasedimensions and weight: l x w x h: 800x 600 x 600 mmweight (approx.): 45 kg, rope brake dynamometerpower 0.5 kwvoltage 220 vphase single phasefrequency 50 hzmaterial stainless steelwheel size 45 cm, cam analysis apparatus capacity 7. 5 hpphase 3 phasespeed 1500 rpmfrequency 50 hzmaterial stainless steel 304color blue, slip gauge set steel sets with high wear resistance.47 & nabl calibrationslip gauge set steel sets with high wear resistance. high level accuracy and reliability of measuring results are guaranteed by precise calibration. provided with nabl traceability if required. sets of m46, m87, m112. metric/imperial., bevel protectorblade length 150mm w/60, 40degree edges, required stand and type, sine bar range 200mm for checking concentricity, run out of sharpness taken & degree checking, digital outside micrometerspecification range 0-25mm, digital vernier caliperspecification range 0-150mm/6 , radius gaugeradius gauge 1-7mm, surface plate granite a grade 24 x 36 inch in a class granite, mechanical comparator analog type with dia

CTN :38198299

04 Dec, 2024 10.00 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For supply of arduino uno r3 , arsuino nano , resberry pi 3 , aurdino mega , breadboards 800points , breadboards 400points , berg strip f,m , zero pcb , 16x2 ldc display with i2c module , usb cables , 9v battery , resistors kit , capacitors kit , linear voltage reguiulator set , water pump module , piezoelectic plate , 8by8 led matrix module , bluetooth module , 7 segment led display , gsm module , gps module , laser diode emitter , ldr module , keypad , joy stick , active buzzer , motor driver l298p , sound playback module , esp 32 , vibrating motor , alligator coonector , dc jack male and female , rgb leds , leds red , leds green , leds blue , leds yellow , leds white , ic lm555 , diod and transistor kit , button switch set , touch module , battery clip , ir sensors , triple axis magnetometer , mq4 sensor , mq5 sensor , mq6 sensor , mq7 sensor , mq8 sensor , mq135 sensor , ir transmiter and receiver , ultrasonic sensor module , triple axis accelerometer , pulse rate heart sensor , relay 1 channel module , relay 2 channel module , sound module , soil moisture sensor module , rain drop sensor , flex sensor , temperature and humidity sensor module , force pressure sensor , colour recognisation sensor , water flow sensor , power bank module , pir motion sensor module , rfid reader , rf module , stepper motor , dc motor , servo motor metal gear 180 , servo motor metal gear 360 , small servo metal gear , 4 wheel robot car chassis kit , drone kit , bio-medical kit , 3d printer , 3d filament 1000gm , cardboard , foam core boards , rubberband , popsicle stick , wood glue 500ml , hacksaw frame , hacksaw blades , mini hacksaw frame , mini hacksaw blades , pliers set , twizer set , ball peen hammer , steel shaft claw hammer , c-clamp , allen key set , drill machine set , workstation for drilling , spanner set , vice normal , precision screw driver , wrench , wire stripper , screwdriver , cordless rotary multitool set , air blower , drill bit set , file set , mini file set , flexiable cutting mat , plastic storage drawer , pegboard , hot glue gun , digital oscilloscope , soldering kit , adapter 5v , adapter 12v , electric screw driver , dual temperature heat gun , soldering helping hand , return measuring tape , stainless steel rule , digital vernier calliper , spirit level , digital multimeter , diy paper microscope , telescope , sewing kit , glue stick , cable tie , power strip adapters , buld holder , electric wires 20m , first aid kit , fire extinguisher , saftey goggles , safety gloves , safety mask , furniture , chairs , leh solar training kit , leh green house kit bid details/ 2 / 103

CTN :38188789

27 Nov, 2024 2.74 Lacs

Manjeri - Kerala

Tender For supply of instruments and materials to omfs - titanium miniplates 2mm 4 hole with gap, titanium miniplates 2mm 2 hole with gap, titanium miniplates 2mm 6 hole with gap, titanium miniplates 1.5 mm 2 hole with gap, titanium miniplates 1.5 mm 4 hole with gap, titanium miniplates 1.5 mm l plate right, titanium miniplates 1.5 mm l plate left, titanium miniplates 2 mm 6 hole without gap, titanium screws 2 x 8mm, titanium screws 2.5x 8mm, titanium screws 1.5x 8mm, titanium screws 1.5x 6mm, screw driver 1.5 mm hospital grade stainless steel - self holding, screw driver 2 mm hospital grade stainless steel - self holding, tungsten carbide bur no.702, tungsten carbide bur no.703, wire cutterhospital grade stainless steel, needle holderhospital grade stainless steel, wire twister largehospital grade stainless steel, wire twister smallhospital grade stainless steel, surgical straight handpieceexternal irrigation, adson fine dissecting forceps 5 "toothedhospital grade stainless steel, adson fine dissecting forceps 5 " non toothedhospital grade stainless steel, adson fine dissecting forceps 7 " toothedhospital grade stainless steel, adson fine dissecting forceps 7 " non toothed, suture removal scissors 6", mayo scissors straight, mayo scissors curved, suction tip ace fraizer 6 french 2mm, suction tip ace fraizer 8 french 2.67 mm, howarth periosteal elevator, tray, erich arch bar, soft stainless steel round wire, probe mirror tweeser set

CTN :37748954

15 Nov, 2024 NA

Purnia - Bihar

Tender For corrigendum : supply of plywood for general purposes as per is 303 (v2) (q3) , hydraulically regulated door closers (q3) , tower bolts (ferrous metals) as per is 204 (q3) , wood screws (q3) , non - ferrous metal butt hinges as per is 205 (q3) , wire nails (q4) , door handles as per is 208 (q4) , hasps and staples as per is 363 (q3) , wire mesh fabric or cloth (v2) as per is 1568 (q3) , stainless steel kitchen plate rack 30 cm into 36 cm into 9 cm , looking mirror 600 into 450 mm , fevicol 1 kg , pvc rawl plug 100 nos pkt , window glass ordinary 3 mm thick 1 point 2m into 1 point 2m , wooden beading of size 20mm into 6mm into 8 inch , wooden beading of size 20mm into 20 inch size 20mm into 6mm into 20 inch , round plug wooden , gi wire binding , bracket for curtain rod , putty 1 kg pkt , aluminum curtain rod 19 mm dia into 12ft lenght , super flush strip 100 mm wide 10 mtr long , pvc float valve 20 mm , gate valve brass 20mm , hack saw blade , gate valve 15 mm , gate valve 25 mm brass , pvc float valve 15mm , pvc float valve 25 mm , pvc stop cock 15mm dia , water storage tank 500 l isi marked , pvc lid for 1000 ltrs capacity , pvc lid for 500 ltrs capacity , m seal 200 gms pkt , brass jumper washer for 15 mm bib tap , hdpe grating 100 mm dia , gi hook for pipeline , gi check nut 20mm , gi check nut 25mm , cp glass self 450 mm long with 4mm glass , ms angle bracket for whb , cement 50 kg , white cement 1 kg , pad lock 6 lever , drill bit for brick hole 4mm 5mm 6mm 8mm and 10mm bid number/ ( ( ) ): gem/2024/b/5442434 dated/* : 02-10-2024 bid document/ 1 1 / 50

corporations/Associations/Others

CTN :38175984

02 Dec, 2024 NA

Khorda - Odisha

Tender For supply of indoor unit , soft or hard drawn copper pipe , frls pvc insulated copper conductor , providing and fixing chlorinated polyvinyl chloride cpvc pipes , medium class pvc conduit along with accessories , 63 a 4 pole rccb , 125 a 4 pole mccb , gi tray 300 mm , cu earth plate , gi wire , mcb with enclosure box , gland and lugs , outdoor unit , refrigerant gas r 410 , 35 sqmm 1.1 kv armoured cable , rafnet , wired remote , kitchen chimney , inline and outline fan , ss flexible rigid pipe , 150 mm pvc pipe , white linear hanging led light , supply and installation of rectangular cafeteria table with seating capacity of 6 persons. , supply and installation of fabrico furniture blackout roller blind. , cafeteria chair , supply and installation of rectangular stainless steel 304 electric hot brain marie with glass top and rectangular pan. , marble work , providing and laying in position specified grade of reinforced cement concrete 1 ratio 1.5 ratio 3. , tmt bar fe 500d , half brick , white cement based putty of average thickness 1 mm , wash basin , making and provision of wash basin and kitchen basin , pvc waste pipe , iron grating for gully trap , stainless steel kitchen sink , mirror of superior glass , ptmt liquid soap container , providing and fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore , fixing c.p. brass long nose bib cock , supply and fixing c.p. brass angle valve , supply and fixing unplasticised p.v.c. connection pipe , supply and installation of aquaguard potable water purification system with inbuilt water cooler. uv

Central Government And Public Sector

CTN :38162026

30 Nov, 2024 2.89 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For supply of domestic plates (v2),domestic plates (v2),domestic plates (v2),domestic soup or salad bowls (v2),domestic soup or salad bowls (v2),tea set,donga with lid 1500 to 2000 ml capacity & thick. 3 to 5 mm,soup bowl with plate and spoon 200 to 250 ml capacity,round stainless steel buffet capacity 05 litre (min. ) . complete set which includes ss lid/ cover

Insert Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others

corporations/Associations/Others

Central Government And Public Sector