Latest instrumentation system repair Tenders | Government instrumentation system repair Tenders

Corporations And Associations And Others

CTN :43027914

23 Dec, 2025 8.00 Lacs

Ambala - Haryana

Tender For corrigendum : expression of interest for preparation of detailed project report, tender documents for designing, detailed project report for construction of 10 mld water treatment works with complete automation and scada comprising of rcc inlet from kanwala minor, rcc storage & sedimentation tank, raw water pumping sump & pump house,water treatment plant comprising of stilling chamber, parshall flume or ventury flume, flash mixer for rapid mixing, clariflocculators for flocculation and settling swith sludge withdrawl, rapid gravity filters, chlorination, underground clear water tank, pump chamber and requisite pumping machinery, rising main from proposed s&s tank to wtp including cost of transformer, dg set, electrical, mechanical instrumentation works complete in all respect in sector – 24, urban estate ambala city.

corporations/Associations/Others

CTN :43166919

23 Dec, 2025 2.69 Crore

Surat - Gujarat

Tender For supply, erection, testing and commissioning of vertical turbine (vt) pump set with allied electrical, mechanical and instrumentation work at new booster house of bhimrad water distribution station of surat municipal corporation.

corporations/Associations/Others

CTN :43166921

23 Dec, 2025 3.28 Crore

Surat - Gujarat

Tender For supply, erection, testing and commissioning of vertical turbine (vt) pump set with allied electrical, mechanical and instrumentation work at new booster house of pal water distribution station of surat municipal corporation.

State Government

CTN :43115394

16 Dec, 2025 14.54 Lacs

Pune - Maharashtra

Tender For supplying, installation, testing and commissioning of generator set for central instrumentation facility department at savitribai phule pune university. (2nd call)

Central Government And Public Sector

CTN :43070181

26 Dec, 2025 NA

Surat - Gujarat

Tender For supply of spare parts for instrumentation limited make make pneumatic operated control valves c c - spare valve plug with stem assembly for vsc 1. 5 inch 1500 bw , spare upper andlower cage for vsc 1. 5 inch 1500 bw , spare seal, material_ peek for vsc 1. 5 inch 1500 bw , spare gaskets set which includes gasket _monel_, upper gasket _ss316 serrated plus graphite_ and lower gasket _ss316 serrated plus graphite_ for vsc 1. 5 inch 1500 bw , spare gland packing set, material_ high density double graphoil _nuclear grade_ for vsc 1. 5 inch 1500 , spare upper andlower cage set for vsc 1. 5 inch 1500 bw , spare gaskets set which includes gasket _monel_, upper gasket _ss-316 serrated plus graphite_ and lower gasket _ss-316 serrated plus graphite_ for vsc 1. 5 inch 1500 bw , spare gland packing set, material_ high density double graphoil _nuclear grade_ for vsc 1. 5 1500 bw plain bonnet with hn2r actuator linear, lift_ 25 mm , spare valve plug with stem assembly for vst 1 inch 1500 bw 3by4-35228-cv148nbys , spare cage type seat ring for vst 1 inch 1500 bw 3by4-35228-cv-148nbys , spare gaskets set which includes gasket _monel_, gasket _ss-316 serrated plus graphite_ for vst 1 inch 1500 bw 3by4-35228-cv-148nbys. , spare gland packing set, material_ high density double graphoil _nuclear_ for vst 1 inch 1500 bw 3by4-35228-cv148nbys , spare valve plug with stem assembly for vst 1 inch 1500 bw 3by4-35228-cv-149nbys , spare cage type seat ring for vst 1 inch 1500 bw 3by4-35228-cv-149nbys , spare gaskets set which includes gasket _monel_ and gasket _ss-316 serrated plus graphite_ for vst 1 inch 1500 bw 3by4-35228-cv-149nbys , spare gland packing set, material_ high density double graphoil _nuclear grade_ for vst 1 inch 1500 bw 3by4-35228-cv-149nbys , spare valve plug with stem assembly for vst 1. 5 inch 1500 bw 3by435228-cv-313 , spare seat ring for vst 1. 5 inch 1500 bw 3by4-35228-cv-313 , spare gaskets set which includes gasket _monel_, upper gasket _ss-316 serrated plus graphite_ and lower gasket _ss-316 serrated plus graphite_ for vst 1. 5 inch 1500 bw 3by4-35228-cv-313 , spare gland packing set, material_ high density double graphoil _nuclear grade_ for vst 1. 5 inch 1500 bw 3by4-35228-cv-313 , spare valve plug with stem assembly for vsc 1. 5 inch 1500 bw 3by4-35234-cv-44 , spare upper andlower cage set for vsc 1. 5 inch 1500 bw 3by4-35234-cv-44 , spare seal, material_ peek for vsc 1. 5 inch 1500 bw 3by4-35234-cv-44 , spare gasket sets which includes gasket _monel_, upper gasket _ss-316 serrated plus graphite_ and lower gasket _ss-316 serrated plus graphite_ for vsc 1. 5 inch 1500 bw 3by435234-cv-44 , spare gland packing set, material_ high density double graphoil _nuclear grade_ for vsc 1. 5 inch 1500 bw 3by4-35234-cv-44 , cage spanner for vsc 1. 5 , 1500. , assembly spanner for vst 1 , 1500. , assembly spanner for vst 1. 5 , 1500. , cage spanner for vsc 2 , 1500. , spare epdm diaphragm, tape liner along with o-rings set for pneumatic actuator, model no. hn2r , spare epdm diaphragm, andtape liner set for pneumatic actuator, model no. hn1d , spare epdm diaphragm, andtape liner set for pneumatic actuator, model no. hn2d //bid details2 / 41

CTN :43047862

17 Dec, 2025 NA

Umaria - Madhya Pradesh

Tender For supply of implants - supply of implants, d.h.s. plate long barrel & short barrel with round holes 125 , 130 , 135 , 140 angle; 3-6, holes ( cortical screw 4.5mm & dhs screw ), d.h.s. plate long barrel & short barrel with round holes 125 , 130 , 135 , 140 angle; 7-18 holes (cortical screw 4.5mm & dhs screw), d.h.s. plate long barrel & short barrel with d.c. holes 125 , 130 , 135 , 140 angle; 3-6 holes (cortical screw 4.5mm & dhs screw), d.h.s. plate long barrel & short barrel with d.c. holes 125 , 130 , 135 , 140 angle; 7-18 holes (cortical screw 4.5mm & dhs screw), d.h.s plate long barrel and short barrel with l.c. hole 125 , 130 , 135 , 140 ; 3-18 hole., note:- dhs instrumentation set with box ,, pediatric d.h.s.1250,1300, 1350,1400 angle;round hole plates 3-8, (cortical screw 4.5mm & dhs screw ), note:- pediatric d.h.s. instrumentation set with box, d.c.s plate (950) with round holes 4 -8, holes (cortical screw 4.5mm & dhs screw & cancellous screw ), d.c.s plate (950) with round holes 9-20, holes (cortical screw 4.5mm & dhs screw & cancellous screw ), d.c.s plate (950) with d c holes 4-8, holes (cortical screw 4.5mm & dhs screw & cancellous screw ), d.c.s plate (950) with d c holes 9-20, holes (cortical screw 4.5mm & dhs screw & cancellous screw ), d.c.s plate long barrel and short barrel with l.c. hole 125 , 130 , 135 , 140 ; 3-18 hole., note:- d.c.s. instrumentation set with box, trochanteric stabilisation plate and screw (125 , 130 , 135 , 140 ; 2-18 hole)with round hole, trochanteric stabilisation locking plate and screw and dc hole (125 , 130 , 135 , 140 ; 2-18 hole), contoured locking plate for fracture shaft femur (right & left) with screw 5mm(broad l.c.p), contoured locking plate for distal end femur (right & left) with screw 3-20 hole., medial & lateral proximal tibial buttress locking plate (t- & l- shape) with screw, hockey plate for tibia (right & left) with screw (4-17hole), hockey locking plate for tibia (right & left) with screw (4-17 hole), contoured medial/ antero-lateral locking plate for lower end tibia with screw (4-20 hole), clover leaf plate with screw (3-20hole), cobra head plate with screw (3-20 hole), hook plate with screw (3-20 hole), proximal humerus locking plate (philos plate) with screw (3-12 hole), contoured locking plate for distal end humerus. with screw (medial,lateral ,posterolateral for right and left side; 3-12 hole), calcaneal plate., calcaneal locking plates., clavicle locking plates.(pre contoured :5-12 hole for right and left), allis plate/ contoured plate for distal end radius with screw (2-12 hole) right and left ., locking elise plate/ contoured locking plate for distal end radius with screw 2-12 hole right and left side ., h-plate. with screw, y- plate. with screw, universal lower end tibia locking plate with screw (3-12 hole), d.c.p. narrow. with cortical screw (4-20 hole), d.c.p. broad. with cortical screw (4-20 hole), small d.c.p. plates with cortical screw (4-20 hole), small d.c.p. locking plates with cortical screw (4-20 hole), lcdcp 3.5mm (4-20 hole), lcdcp 4.5mm (4-20 hole), 1/3 rd tubular plates 3.5mm. with cortical screw (3-14 hole), reconstuction plates 3.5mm.with cortical screw(3-14 hole), reconstuction plates 4.5mm. with cortical screw(3-14 hole), reconstuction locking plates 3.5mm. with only locking screw (3-20 hole), reconstuction locking plates 4.5mm. with only locking screw (3-20 hole), pelvic spring plate, pelvic curved plate, pelvic streight plate, pelvic symphyeal plate, proximal tibia raft plates (4-20 hole), extra articular distal humerus plates (4-20 hole) for right and left, olecranon plates 3-12 hole., lateral distal fibula plates locking , precontoured 4-12 hole., fully threaded cannulatedcancellous screws 4mm. 25, 30 .115 mm, in 5 mm increment., 16 mm threaded cannulatedcancellous screws 4 mm., fully threaded cannulatedcancellous screws 6.5 mm 25, 30, .115 mm, in 5

CTN :43020662

31 Dec, 2025 NA

Delhi - Delhi

Tender For tender for rate contract of orthopedic spine implants - spine implants, pedicle screw set for spine consisting of 4 screws with ini and 2 connecting rods; top loading, polyaxial screws 4.5mm/5.5mm/6.5mm, length- all sizes, with one trans rod connector(all sizes). titanium., pedicle screw set for spine consisting of 4 screws with ini and 2 connecting rods; top loading, monoaxial screws 4.5m25m/5.5mm/6.5mm, length- all sizes with one trans rod connector(all sizes). titanium., pedicle screw set for spine consisting of 8 screws with ini and 2 connecting rods; top loading, polyaxial screws 4.5mm/5.5mm/6.5mm, length- all sizes. titanium., pedicle screw set for spine consisting of 8 screws with ini and 2 connecting rods; top loading, monoaxial screws 4.5mm/ 5.5mm/ 6.5mm, length- all sizes. titanium, cervical spine locking plate set, titanium. plate length 36mm to 90mm (adequate for one to four level vertebral fixation), 4 screws 4.0 mm( length 14mm/16mm)., top loading implant system for posterior stabilization of cervical spine and upper thoracic spine -the system should have locking screws for angularly stable locking and fixation of the rod. the system must have self- tapping screws. the system must have 3.5 mm ti rod. the system should have oc fusion option. the system should offer hooks. cancellous profile bone screws: 3.5 mm: 8 mm 50 mm (2 mm increments ) 4.0 mm: 8 mm 50 mm (2 mm increments). cortical profile bone screws: 3.5 mm: 28 mm 50 mm (2mm increments). screw head profile: height = 11 mm, diameter=9 mm. rod run = 9 mm. shaft screws (cortical profile):3.5mm: 22 mm 36 mm (2mm increments). shaft screws (cortical profile):3.6mm: 22 mm 36 mm (2mm increments). shaft screws should have 10 mm unthreaded portion rods must be of the following specifications: 3.5 mm ti rod: 80 mm, 120 mm and 240 mm lengths. 3.5 mm/5.0 mm ti rod, 120 mm/170 mm. 3.5 mm/6.0 mm ti rod, 120 mm/170 mm. trans-connector: 60 mm and 75 mm. short and long/left and right hooks. 3.5 mm ti transverse bar. the system should have occipital plate/rods options. should be quoted as a set of 4/6/8 screws with inner nuts and 2 rods. should provide undertaking to provide the instrumentation one day prior to surgery. price of transverse connectors and occipital plate with screws to be quoted separately., titanium mesh cage, fenestrated and hollow from inside to accept bone graft- all sizes (10-16mm dia, 80mm length)., titanium tlif banana cage - all sizes (6/8/10/12mm height, small/medium/large foot print), titanium expandable cage for cervical/ thoracic/ lumbar spine. misc sizes *, device for intervertebral assisted motion 8mm, 10mm, 12mm, 14mm *, titanium anterior staples 13 mm, 15mm, 17 mm, plif cage peek 7-14 mm, foot print 22-28 mm. 1 set consists of 2 pcs *, tlif cage peek 7-14 mm, foot print small/ medium/ large. 1 set consists of 1 pc *, laminoplasty spacer peek with 2 screws misc sizes *, kyphoplasty kit *, vertebroplasty kit *, absorbable haemostat (oxidized regenerated cellulose), sterile 1.25 x 5cm, hemostatic matrix plus flex tip (flowable haemostat)*, non- suture self adhesive artificial dural membrane (small / medium size), round tip diamond burr with long handle (2mm diameter) stryker, round tip diamond burr with long handle (3mm diameter) stryker, round tip carbide burr with long handle (3mm diameter) stryker, hydroxyapatite trapezoidal spacer (2cm x 1cm x 0.5cm) for cervical laminoplasty, titanium lateral mass/ pediclescrews set (4 screws 3.5mm and 2 rods and transverse connector) *, titanium cannulated lag screw for odontoid all sizes *

CTN :43020671

31 Dec, 2025 NA

Delhi - Delhi

Tender For tender for rate contract of orthopedic trauma implants - arthroplasty implants, proximal humerus locking compression plate (philos) 3.5mm, left/right set: 3 to 11 holes on shaft of plate with 9 locking screws 3.5mm (length-all sizes) and 6 cortical screws 3.5mm (length-all sizes), stainless steel., narrow 4.5 mm locking compression plates set: 6 to 14 holes (combihole design) with 4 cortical screws 4.5mm (length- all sizes) and 6 locking screws 4.5mm (length- all sizes), stainless steel., distal humerus anatomical locking plate set 3.5mm left/right (two plates- one medial and one lateral with 6 cortical screws and 8 locking screws, 4 to 8 holes on shaft of plate), stainless steel., extra articular distal humerus locking compression plate 3.5mm left/right set, with 4 to 12 holes on shaft of plate(combihole design), with 4 cortical screw(length- all sizes) and 8 locking screws (length all sizes), stainless steel., interlocking nails for humerus with provision for minimum 3 proximal and 2 distal locking screws (nail diameter 6-8mm, length 22-30mm), proximal radius anatomical locking plate set 2.4mm/2.7 mm, left/right for fixation of radial head and neck, 4 to 6 hole with 4 locking screws and 2 cortical screws, stainless steel., olecranon anatomical locking plate set (hook plate) 3.5mm, left/right, 4 to 8 holes on shaft of plate with 8 locking screws and 4 cortical screws, stainless steel., locking compression plate 3.5mm (combi-hole design) set 5 to 12 hole with 4 cortical screws and 4 locking screws, stainless steel., 1/3rd tubular plate set 3.5mm 4 to 12 hole with 8 cortical screws, stainless steel., 1/3rd tubular locking plate set 3.5mm 4 to 12 hole with 4 cortical and 6 locking screws, stainless steel., distal radius anatomical locking plate set (volar) 2.4mm/3.5mm left/right with 3 to 7 holes on shaft of plate, with 6 locking 2.4mm screws and 2 cortical 3.5mm screws and 4 locking 3.5mm screws, stainless steel., distal radius t locking plate 3.5mm set with 3 to 7 holes on shaft of plate with 6 locking screw and 4 cortical screws, stainless steel., distal radius t non locking plate set 3.5mm set with 3 to 7 hole on shaft of plate with 8 cortical screws, stainless steel., clavicle locking plate set 3.5mm right/left (6-8 holes) with corresponding screws, ss., headless compression screws 2.7mm, self-tapping, cannulated, length 10-40mm,titanium, headless compression screw 3.5mm self-tapping, cannulated, length 10- 50 mm, titanium, headless compression screw 4.5mm self-tapping, cannulated, length 10 60 mm, titanium., 1.5 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, 2.0 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, 2.4 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, radius intramedullary square nail set diameter 2.0mm to 4.0 mm and length 20 to 36mm, stainless steel., ulna intramedullary square nail set, diameter 2.0mm to 4.0 mm and length 20 to 36mm, stainless steel., 3.5mm reconstruction non- locking plate set 4 to 14 hole with 8 cortical screw, stainless steel, 3.5mm reconstruction locking plate set 4 to 12 holes with 4 cortical screw and 6 locking screw, stainless steel., 2.7mm reconstruction non locking plate set, 4 to 14 holes with 8 cortical screws, stainless steel., orthofix external fixator, size- l/m/s/es, ss, dynamic screw measuring 9mm, ilizarov ring fixator set for tibia: one set consisting of 10 half rings (120 mm to 220 mm), plus one 5/8 ring (120mm to 220mm), 10 ring connecting bolts, 12 threaded rods(100 mm to 400mm), eight 1.8mm ilizarov wires(trocar/bayonet tip), six olive wires, 30 slotted bolts (centric/eccentric/schanz screw holding), 120 full nuts, 10 washer, two male and two female posts(one to four holes), four schanz screw 4.5mm/5.0mm, two male hinge and two female hinge. instrumentation to be provided along with the set must

CTN :42988193

13 Dec, 2025 NA

Thiruvananthapuram - Kerala

Tender For tender for supply of equipment and tools for setting up of facilitation centre for student innovation - setting up of facilitation centre for student innovation & entrepreneurship under plan fund of government of kerala - equipment, tools & consumables, scroll saw, band saw, belt and disk sander, bench top drill press, bench top mini metal lathe, planer, sheet metal folder, miter saw, bench vices, arc welding machine, dremel 4250-3/50 rotary tool kit, electric router (1300 w, 8 mm bit, variable speed, restart protection) and 15 pc. router bit set, electric planer (710 w, 82 mm width, 2.6 mm depth, 18000 rpm), electric orbit sander (250 w, 12000 rpm, velcro type fastening, micro filter system), handheld blower (16000 rpm, 650 w), 37 piece socket set , hole saw set, riveter set, aviation snips, chisel compass (16"), plastic nipper plier (5"), needle nose miniature plier, tubing cutter 3-28 mm, jaw locking plier (10") - (micro adjusting screw and pressure release lever), t handle socket (8 mm, 6 point socket-hex end), compact frame hack saw (24 t), toolbox with top lid and removable tray compartment (16"), electric hoist, pipe bending machine, digital microscope, weighing scale, virtual instrumentation suite

Instrumentation System Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

corporations/Associations/Others

corporations/Associations/Others

State Government

Central Government And Public Sector