Latest insulated barrier Tenders | Government insulated barrier Tenders

State Government

CTN :39601440

11 Mar, 2025 35.85 Lacs

Ranchi - Jharkhand

Tender For supply of spare parts for standard deep well hand pump im ii/im iii under d.w.and s. division, ranchi west, ranchi during the year 2024-25. - spare of deep well hand pump for im-ii & im-iii (vlom-65 & vlom-50) conforming to is:15500 (relevant part 1 to 8)/2004 (with latest amendment) only from manufacturers/ suppliers approved from bis/unicef after proper verification of offer sheet, inspection certificate, marking and packing etc, as per bis/unicef s standard norms., hexagonal bolt m12x1.75x40mm long common to im ii & iii, handle axle (stainless steel), ball bearing 6204 z, spacer for handle, chain with coupling, hexagonal rod coupling m12x1.75x50mm long., nitrile rubber cup washer for india mk-ii, pump head assembly (g.i.) with front cover , hexagonal nut & bolt & third plate., front cover (g.i.), handle assembly (g.i.), (a) water tank assembly for mark ii (g.i.), connecting rod 3mtr. long with coupling and nut (electrogalvanized), cylinder assembly complete set for im-ii, upper valve(plunger) assembly complete set for im ii, lower (check) valve assembly complete set for im ii, plunger rod (s.s,) for mark-ii, upper valve guide (g.m.) for mark-ii & mark-iii (vlom-65), third plate for head assemble (galvanized), cylinder body with brass liner for im-ii with reducer cap for top and bottom., gun metal spacer (bucket), 32mm g.i. socket, add 5% gst

State Government

CTN :39601442

12 Mar, 2025 30.00 Lacs

Ranchi - Jharkhand

Tender For supply of spare parts for standard deep well hand pump im ii/im iii under d.w.and s. division ranchi east, ranchi during the year 2024-25. - spare of deep well hand pump for im-ii & conforming to is:15500 (relevant part 1 to 8)/2004 (with latest amendment) only from manufacturers/ suppliers approved from bis/unicef after proper verification of offer sheet, inspection certificate, marking and packing etc, as per bis/unicef s standard norms., hexagonal bolt m12x1.75x40mm long common to im ii & iii, hexagonal nut m12x1.75mm, hexagonal rod coupling m12x1.75x50mm long., cylinder body with brass liner for im-ii with reducer cap for top and bottom., hexagonal bolt for front cover m12x1.75x20mm long., upper valve(plunger) assembly complete set for im ii, lower (check) valve assembly complete set for im ii, upper valve guide (g.m.), reducer cap for cylinder mark-ii, check valve guide mark-ii, g.m. spacer i.m. -ii, rubber seat retainer for mark-ii, b.s. connecting rod 3.00 m long, water tank assembly for mark ii, c.i. cylinder im-ii, pump head assembly, plunger rod (ss) for mk -ii, add 5% gst

State Government

CTN :39614819

12 Mar, 2025 31.14 Lacs

Ramgarh - Jharkhand

Tender For supply of spare parts of deep well hand pump conforming with latest amendment under dws division ramgarh 204-25 - spare parts of india mark ii deep well hand pump conforming to i.s. - 15500 (pt-ii)/2004 to be procured only from approved manufacturers from approved manufacturers from unicef approved qualified supplier & after proper verification of offer sheet inspection certificate marketing and packing etc as per unicefs standard norms, hexagonal bolt m12x1.75x40mm long common to both mk-ii & iii., hexagonal nut m12x1.75. , high tensile bolt m10x1.5x40mm long., nyloc nut m10x1.5mm, handle axle (stainless steel)., ball bearing 6204z., spacer for handle, chain with coupling., nitrile rubber cup washer for mark-ii & ill., nitrile rubber sealing ring mark-ii., nitrile rubber seating big for lower valve mark-ii., nitrile rubber seating small for upper valve mark-ii., hexagonal rod coupling m12x1.75x50mm long, pump head assembly (g.i.), front cover (g.i.), handle assembly (g.i)., water tank assembly for mark-ii (g.i.), connecting rod 3mtrs long with coupling & nut (electrogalvanized)., cylinder assembly complete set for india mark-ii., upper valve assembly complete set for lm-ii, lower valve assembly complete set for im-ii, reducer cap for cylinder mark-ii, plunger rod (s.s.) for mark - ii, upper valve guide (gm)., rubber seat retainer far mark- ii, third plate for head assembly (galvanized), cylinder body with brass liner for im-ii with reducer cap for top & bottom., brass linear, check valve seat for mark - ii, 32 mm g.i. socket, gst @ 5% (add sgst 2.5% + cgst 2.5%)

Central Government And Public Sector

CTN :39572174

27 Mar, 2025 17.97 Lacs

Lumding - Assam

Tender For providing of customized amc/cmc for pre-owned products - 140 t bd crane - 1) annual maintenance will be signed by railways and the tenderer who taking responsibility of maintenance of the 140 t gottwald bd crane. annual maintenance contract means, the contractor will undertake the maintenance activity of the 140 t gottwald bd cranes, as per the terms and conditions decided. 2) hydraulic (rexroth) for both the undercarriage and the super structure. 3) pneumatics (sab wabco and knorr) for both the undercarriage and the super structure. 4) gear drives (lohmann) for the complete crane 5) bearings (fag, skf, elges) complete check/ inspection. 6) slewing ring (rothe erde and rks) complete check/ inspection 7) auxiliary engine- complete check/ inspection/repair 8) during amc period you would cover all the systems of the crane mentioned above and ensure that each system is working optimally and that the systems are interfacing with each other to provide the desired load capability. 9) while conducting the inspections during the amc visits, your engineers would also be able to indicate the requirement of the spares by identifying parts that would need replacement together with your staff. in doing so, we could establish a system for predicting which parts would be required and when, thus allowing for proper planning for procurement. 10) labour charges for rectifying defects/failure will be borne by the contractor

CTN :39629149

20 Mar, 2025 NA

Kharagpur - West Bengal

Tender For supply of inspection cover to hitachi drg. no. -10s 813-666 (alt.-b) & 10s 813-668 (alt.-c). [ warr anty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39519331

18 Mar, 2025 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of tyre defect gauge for bg wagons as per indian railway standards made of 3.8 mm/ 3.1 mm thick . stainless steel plate with laser etched permanent maeking used for inspection of condemn fla nge thickness, root radius, shrap flange, deep flange, flatness of tread etc. of wheel profile. supplied in car rying case. weight : 300 gm. (approx. without cover) material : stainless steel 3.8 mm or 3.1 mm thick. di mensional tolerance : within 0.05 mm. case : cordura with belt holster flatness : 50/60 mm. flange : 16m m. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39618760

09 Apr, 2025 NA

Multi City - Multi State

Tender For - denoting no.- g 506 b, free travelling authority book, in size: 8.5 inch x 8 inch, (books) with 100 lvs. having one side print on 58 gsm ir logo white water mark security paper in black ink. printing instructions: : printing with raw material. text matter with one side printing in bilingual (hindi and english) text matter printing in black colour ink numbering to be machine serial numbered on right top corner (in duplicate on same page i.e. on 02 counter foils) in 6 digits and as per serial number allotted. in no case the number shall be printed on dot matrix/inkjet or laser jet printers. raw material:- for text printing over 58 gsm ir logo white water mark security paper conforming to is 1848/2007 as amended up to 2018 for cover page kraft paper 130 gsm conforming to is 1397/90 or latest grade- ii binding specifications: 100 leaves (in duplicate on same page) limp bound with two side pins on left side of cover page. one seal pin on right bottom corner supply should be in a bundle of 20 nos. each with strapping. numbering instructions: the commencing no. is to be obtained from amm (sty) by. manuscripts to be get approved from amm (sty)/ by. 2. item details s.no.pl code (group) item type gst(y/n) stock / nonstock orderingconsider for eval approving agency inspection agency currency allowed estimated rate 183055010goods (y)stock---yesconsigneeinr description :(mvb item) (n) description :- denoting no.- g 506 b, free travelling authority book, in size: 8.5 inch x 8 inch, (books) with 100 lvs. having one side print on 58 gsm ir logo white water mark security pape r in black ink. printing instructions: : printing with raw material. text matter with one side printing in bilingual ( hindi and english) text matter printing in black colour ink numbering to be machine serial numbered on right top corner (in duplicate on same page i.e. on 02 counter foils) in 6 digits and as per serial number allotted. in no case the number shall be printed on dot matrix/inkjet or laser jet printers. raw material:- for text printing over 58 gs m ir logo white water mark security paper conforming to is 1848/2007 as amended up to 2018 for cover page kraft paper 130 gsm conforming to is 1397/90 or latest grade- ii binding specifications: 100 leaves (in duplicate on same page) limp bound with two side pins on left side of cover page. one seal pin on right bottom corner su pply should be in a bundle of 20 nos. each with strapping. numbering instructions: the commencing no. is to be obtained from amm (sty) by. manuscripts to be get approved from amm (sty)/ by. [ warranty period: 30 month s after the date of delivery ]

Central Government/Public Sector

CTN :39588067

11 Apr, 2025 NA

Erode - Tamil Nadu

Tender For supply of packing for inspection cover for hitachi traction motor

CTN :38869209

17 Mar, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply of engineering allowance items (consumable) for grse p17a project, yard nos. 3022-24 - 3/8" bsp pr. gauge_dial 100mm_1 to10 bar, 3/8" bsp pr. gauge_dial 100mm_1 to16 bar, bellow metllic - dia 125 , hose assy gasoline armoured 2" x 8.5', teflon rods_various dia(20mm,50mm,80 mm), teflon tape, thermometer (rings 5deg c- 95 deg c), plstc storge bottle_lub oil_oil sampling, plstc storge bottle_lub oil_fuel samplng, tinted glass storage bottles (1ltr)avcat, glass storage bottle for lub oil, blanks for firemain pumps 150tph, blanks_sea water cooling pump 250tph, blanks for ac sea water pumps, blanks for ac chilled water pumps, battery for torches (big), battery for torches (small), snap on for replcemnt ear plug_glass40-1, steel putiy, valvoline premium blue 7800 plus de oil, dyson v11 absolute pro w/ battery&acces., tarpaulin cover for gt,da intake&exhaust, refrigerant removal kit, 100 nb rubber bellow, 125 nb rubber bellow, strainr elemnt_200nb_90/10 cuni,mesh 6mm, strainr elemnt_150nb_90/10 cuni,mesh 6mm, strainr elemnt_100nb_90/10 cuni,mesh 6mm, strainer elemnt_80nb_90/10 cuni,mesh 6mm, strainer elemnt_50nb_90/10 cuni,mesh 6mm, strainer elemnt_40nb_90/10 cuni,mesh 6mm, strainr elemnt for 200nb_ss 316,mesh 100, strainer elemnt for 100nb_monel,mesh 100, strainer elemnt for 80nb_ss 316,mesh 200, strainer element for 32nb_monel,mesh 200, strainer element for 65nb_monel,mesh 200, strainer element for 50nb_monel,mesh 100, strainer element for 65nb_monel,mesh 100, strainer element for 50 nb y-type_monel, strainer element for 65nb_monel,mesh 100, 200 nb rubber bellow, 65 nb corrugated pvc green hose, 10 nb rubber hose, jubilee clips of size 150mm., jubilee clips of size 200mm., metallic bellow, 65 dia, 400mm, metallic bellow, 32 dia, 350mm, metallic bellow, 40 dia, 350mm, strainr elemnt for 150nb_ss 316,mesh 200, bellow metllic - dia 40 , emergency floodlight (led) with battery, inspection camera dewalt, fabric bag 1st intervention facom, steel toe safety shoe (size 7-15 pairs), steel toe safety shoe(size 8-35 pairs), steel toe safety shoe(size 9-35 pairs), steel toe safety shoe(size 10-35 pairs), steel toe safety shoe(size 6 -5 pairs), steel toe safety shoe(size 12-5 pairs), cobalt steel bimetal saw blades, loctite 596 gasket maker, bosny lacquer spray, drill bits carbide tip 3 mm to 20 mm, drill bits tungsten tip 3 mm to 20 mm, st of scrw driver_philips tip consistng:, stanley cushion grip scrw drivr st 16pcs, socket set, 1/21n square drive, kj dual input thermometer extech, non contact thermometer range-32t0760deg, 3/8" bsp pr. gauge_dial 100mm_1 to10 bar, 3/8" bsp pr. gauge_dial 100mm_1 to16 bar, bellow metllic - dia 125 , hose assy gasoline armoured 2" x 8.5', teflon rods_various dia(20mm,50mm,80 mm), teflon tape, thermometer (rings 5deg c- 95 deg c), plstc storge bottle_lub oil_oil sampling, plstc storge bottle_lub oil_fuel samplng, tinted glass storage bottles (1ltr)avcat, glass storage bottle for lub oil, blanks for firemain pumps 150tph, blanks_sea water cooling pump 250tph, blanks for ac sea water pumps, blanks for ac chilled water pumps, battery for torches (big), battery for torches (small), snap on for replcemnt ear plug_glass40-1, steel putiy, valvoline premium blue 7800 plus de oil, dyson v11 absolute pro w/ battery&acces., tarpaulin cover for gt,da intake&exhaust, refrigerant removal kit, 100 nb rubber bellow, 125 nb rubber bellow, strainr elemnt_200nb_90/10 cuni,mesh 6mm, strainr elemnt_150nb_90/10 cuni,mesh 6mm, strainr elemnt_100nb_90/10 cuni,mesh 6mm, strainer elemnt_80nb_90/10 cuni,mesh 6mm, strainer elemnt_50nb_90/10 cuni,mesh 6mm, strainer elemnt_40nb_90/10 cuni,mesh 6mm, strainr elemnt for 200nb_ss 316,mesh 100, strainer elemnt for 100nb_monel,mesh 100, strainer elemnt for 80nb_ss 316,mesh 200, strainer element for 32nb_monel,mesh 200, strainer element for 65nb_monel,mesh 200, strainer element for 50nb_monel,mesh 100, strainer element for 65nb_monel,mesh 100, strainer element f

State Government

CTN :37589325

17 Mar, 2025 72.69 Lacs

Birsinghpur - Madhya Pradesh

Tender For corrigendum : procurement of casing top and bottom with seal packing and inspection cover and labyrinth seal along with fasteners of greaves make gear box of 8.5 e9 coal mill installed at boiler of unit no. 3 and 4, sgtps, mppgcl, birsinghpur.

Insulated Barrier Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors