Latest insulation mat Tenders | Government insulation mat Tenders

Central Government / Public Sector

CTN :38604587

20 Dec, 2024 NA

Tirupati - Andhra Pradesh

Tender For supply of 53 mm thick thermal cum sound insulation in roof and side wall of drivers cab a rea (nose cone area) only in ts/dtc coaches as per spec.icf/md/spec-413 and as per drawing train18/mc/ ac(727)-9-0-005,item-9, alt-e -13 sq.mts 2) supply and installation of 28 mm thick thermal cum sound insu lation in flooring of drivers cab area (nose cone area) only in ts/dtc coaches as per spec.icf/md/spec- 413 and as per drawing train18/mc/ac(727)-9-0-005,item-10, alt-e -10 sq.mts 3) non-flammable solvent bas ed adhesive for pasting insulation material to stainless steel and spec. icf/md/spec-093,issue status-01 ,rev-00,dated: 27.06.1998 with amendment no.1&2 and as per drawing train18/mc/ac (727)-9-0-005,item-6,a lt-e - 6 kg (approx). 4) aluminium foil pressure sensitive self adhesive tape size to size 0.12mm x 30mm x2 0 mtrs long. with spec.scotch-mount nr 0.425(zb.fa.3m) and as per pp57131, dt:03.06.1994 and as per dra wing train18/mc/ac(727)-9-0-005,item-7,alt-e- 1 no [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38499987

27 Dec, 2024 19.00 Lacs

Rajkot - Gujarat

Tender For supply of 1100 volt grade multi-stranded copper conductor flat cable,suitable for submersible, pvc insulated, pvc sheath. size :6 sq.mm. x 3 core annealed bare copper flexible isi marked fr/frlsflat cable as per is: 694: 2010 latest. type of insulation (shallconforming to is:5831: 1984 ) type-d. type of sheath : st 2 (hr).note: (1) oem/authorized dealer proof of purchase to besubmitted along with the material supplied. 2) type testcertificate from nabl approved lab. cable should be require insingle length only, delivered in pieces will not be accepted.accepted make:-polycab, avocab, havells, paragon, finolex,bharatcab, rr kabel, l&t, anchor, kei, paragon, hpl, bentec,fortgloster or similar approved make , self-content drinking water cooler with (non -cfc refrigerant)energy-efficient compressor, full ss body colling capacity 150 ltrs/ hrs, storage capacity 150 ltrs, rate of maximum energy 1550watts, water cooler cabinet sheet material stainless steel ( gradeaisi - 304) total ss-304 body,cooler cabinet sheet thickness0.8mm, is:1475 latest, make :-voltas, usha, bluestar, sidwal, onlyoem proof of purchase to be submitted along with the materialsupplied warranty period : 30 months from the date of supply , led light fitting for lavatory/mirror, type-d, 9-watt, 110v ac/dcas per rcf drawing no. lw 76092 and per rdso specification no.rdso/pe/spec/tl/0091-2016 rev-1 or latest . accepted make :ensave, rt vision, dr auto, k-lite, intra and kwiklite. , brushless direct current (bldc) motor type ceiling fan1200mm with remote, blade, down rod compete, 28/36 w,230v, 50hz, white colour, make: usha, havell's, crompton,bajaj, orient only , 1200mm sweep, 5-star rated bldc fan with electronic regulator tooperate on 230v single phase ac supply. wattage 28-32w ,is:-374:1979 or latest version make orient,atomberg ,havells,usha,crompton, bajaj only , industrial wall air circulating fan 600 mm sweep, 230vacincluding mounting accessories. sweep 600 mm (24 inch) 180wpower consumption heavy duty ,high speed, 3blade type swing 90degrees speed 1400 rpm, adjustable speed, as per is:-2997 make:-bajaj,crompton,almonard,havells, anchor only ,1x18w led fitting with 4 feet long led tube minimum 1440lumens for platform lighting batten type ip 65 (with clampsfor platform covershed hanging) as per western railwaytechnical specification no. wr / ccg/ specification/p/001(rev) 2018. make:-surya, philips, jaquar, crompton,bajaj,polycab only , supply, installation, testing and commissioning of wall mountinverter type 1.5 ton capacity, 5 star ratingcooling machine (variable speed), compressor type- bldc, rated iseer value 5 &above, input power supply 230 v ac (+/- 10 %), 50hz, with one setheavy duty ms stand suitable for outdoor unit and additionalmaterial require (except standard installation material) 10-footcopper pipe, 10ft water pipe,insulation material 10ft, 2.5 sq.mm.frls copper flexible insulated cable 10ft . note: (1) requireminimum 10 years warranty on compressor &5 year warranty onall type of electronic pcb circuit & rest parts of machine. (2)make: o general, daikin, voltas, samsung, blue star, ifb, hitachi,mitsubishi only(3) delivery required at: sse/rac/rjt officewarranty certificate & test report to be submitted along with thematerial supplied. rites inspection if applicable should be done asper is 1391(part 2)/6/ sept 2023

CTN :38442901

20 Dec, 2024 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of fire class, thermal and acoustic insulation material for project 7500 dwt multipurpose dry cargo vessel.

Central Government/Public Sector

CTN :38456986

26 Dec, 2024 40.00 Lacs

Kangra - Himachal Pradesh

Tender For repair/ replacement of lt underground cables and connected items in various locations at mil stn yol - excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard dense soil, complete all as specified and directed., excavation in trenches, not exceeding 1.5 mtr wide and exceeding 1.5 mtr but not exceeding 3 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard dense soil, complete all as specified and directed., returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cms thick in any type of soil complete all as specified and directed., removing excavated materials/ soils, not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed., pcc 1:3:6 (nominal mix) type c-2 (using 40mm graded crushed stone aggregates) as in coping of pole including necessary form work complete all as specified and directed., pcc 1:4:8 (nominal mix) type d-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed., sand cushioning to protection of underground cables, laid 8 cm before laying and 15 cm after laying of cable, and punned to form an overall layer of 18 cms thick, complete all as specified and directed note: punned thickness shall be measured., sub class b brick, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick including taking out old bricks, complete all as specified and directed., laying only bricks along the length of cable on sand cushioning, with width equal to the length of the brick , complete all as specified and directed., mild steel galvanised iron tubing light grade for cable protection as in road crossing, along poles, walls, floors, drain of 80mm size fixed with ms clamps, nuts and bolts required complete all as specified and directed., mild steel galvanised iron tubing light grade for cable protection as in road crossing, along poles, walls, floors, drain of 50mm size fixed with ms clamps, nuts and bolts required complete all as specified and directed., dismantling poles/struts, any size and type including insulators and removing from site, complete all as specified., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe insulated screened and pvc sheathed armoured electric power lt cable heavy duty with aluminium conductor nominal cross sectional area 300 sqmm 3.5 core for working voltage upto including 1100 volts conforming to is-7098 (part-i) 1988 including taking out existing unserviceable cable, complete all as specified and as directed., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe insulated screened and pvc sheathed armoured electric power lt cable heavy duty with aluminium conductor nominal cross sectional area 240 sqmm 3.5 core for working voltage upto including 1100 volts conforming to is-7098 (part-i) 1988 including taking out existing unserviceable cable, complete all as specified and as directed., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe insulated screened and pvc sheathed armoured electric power lt cable heavy duty with aluminium conductor nominal cross sectional area 185 sqmm 3.5 core for working voltage upto including 1100 volts conforming to is-7098 (part-i) 1988 including taking out existing unserviceable cable, complete all as specified and as directed., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe i

Central Government And Public Sector

CTN :38466634

20 Dec, 2024 NA

Multi City - Multi State

Tender For specification for supply of 1kw heating element for electric oven: 1. item: ceramic insulated heating element 2. heating element material: nichrome 3. shape of heating element: spiral 4. wattage of heating element: 1000 watts (1kw) 5. operating voltage: 240 volts 6. insulation material: multiple ceramic tubular beads 7. size of each insulation tubular beads: 20mm dia x 50mm length 8. length of coil element along with insulation tubing: 1550mm 9. terminal connection: extra 50mm heating element for connection 10. insulation resistance of heating element: minimum 80 m-ohm 11. maximum temperature: 300 deg.c 1 2. inner dia of existing oven tube for inserting heating element: 22mm 13. warranty: minimum 01 year fro m the date of supply 14. documents required from the supplier along with the supply of material: (a) manuf acturer?s test certificate indicating of kw, current, voltage & ir value. (b) warranty certificate. 15. inspecti on: by consignee after receiving of material at rwf site 16. for more information, the dimensions shall be f ollowed as per sketch enclosed. [ warranty period: 12 months after the date of delivery ]

CTN :38264700

26 Dec, 2024 28.64 Crore

Rajsamand - Rajasthan

Tender For construction of 220kv and 132kv transmission lines associated with 220kv gss deogarh distt rajsamand including survey, supply of all equipments/ materials, erection (including civil works), testing and commissioning turnkey project - tower: fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, d-shackles, bird guard, u-bolt, pack washer, anticlimbing devices etc., high tensile steel, mild steel, supply of bolts & nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, spring washers etc. ), supply of earthing material of towers, pipe type set, counter poise earthing set, supply of following tower accessories, danger plate, number plate, phase plate (set of three), design, manufacture and supply of following line material. **, 70 kn disc insulators, 120 kn disc insulators, hardware fittings for acsr zebra conductor, single suspension h/w fittings for acsr zebra conductor, single tension h/w fittings for acsr zebra conductor, double suspension h/w fittings for acsr zebra conductor, double tension h/w fittings for acsr zebra conductor, accessories for acsr zebra conductor, mid span compression joint for acsr zebra conductor, repair sleeve for acsr zebra conductor, preformed armour rod for acsr zebra conductor, vibration damper for acsr zebra conductor, earth wire, g.i. earth wire 7/3.15 mm, strain assembly for earth wire 7/3.15mm with copper earth bond, suspension assembly for earth wire 7/3.15mm, vibration damper for earth wire 7/3.15mm, mid span compression joint for earth wire 7/3.15mm, repair sleeve for earth wire 7/3.15mm, any other item required for successful completion of work

Insulation Mat Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector