Latest interlocking paver tile laying Tenders | Government interlocking paver tile laying Tenders

State Government

CTN :43156705

22 Dec, 2025 2.09 Lacs

Mayabunder - Andaman And Nicobar Islands

Tender For renovation of iei of ground floor of girls hostel of mg govt. college, mayabunder. sw-special repair and maintenance of 125 kva genset and amf panel of mgg college under sub division-iv,nacd, mayabunder.

State Government

CTN :43139103

26 Dec, 2025 NA

Doda - Jammu And Kashmir

Tender For supply of renovation to kindergarten room smart class with power backup -floor and wall renovation , alphabet and vocabulary flash cards , essential learning flash cards , mathematics activity kit , creative building blocks set , kids educational laptop , shape and color learning set , drawing and activity workbook , alphabet wooden toys , puzzle and logic blocks , mini jumping ball with pump , indoor classroom slide , smart panel , connectivity setup , podium , classroom desk , inverter with battery , wireless wi-fi with installation

State Government

CTN :41162488

13 Dec, 2025 NA

Chandigarh - Chandigarh

Tender For bid to ras bid to ras corrigendum : supply of networking active and passive components with installation c c - managed layer 3 10 gig 48 ports with 4x40g slash 100g uplink ports 2x hot swappable load sharing power supplies , managed layer 3, 24 port 1 slash 10g sfp plus ports, 4x 100g uplinks ports , managed layer 2 24x1g copper ports with 4 x 10g sfp plus ports , 10g multimode transceiver , 10g singlemode transceiver , 1g copper transceiver , 6 core multimode optical fiber cable , 96 fiber rack mount liu loaded with lc adapter and lc pigtails multimode , 6 fiber rack mount liu loaded with lc adapter and lc pigtails multimode , lc-lc multimode fiber patch cord - 3 meter , 6 core singlemode os2 optical fiber cable , 48 fiber rack mount liu loaded with lc adapter and lc pigtails singlemode , 6 fiber rack mount liu loaded with lc adapter and lc pigtails singlemode , lc-lc singlemode fiber patch cord - 3 meter , cat6 utp cable 305 meter box , cat6 24 port patch panel - unloaded , cat6 information outlet - jack for patch panel , cat6 information outlet - jack for end user , face plate , surface mount box , cat 6 utp patch cord - 1 meter , cat 6 utp patch cord - 3 meter , 42u floor standing rack 800 x 1000 mm with accessories , 15u wall mount rack 600mm depth with accessories , plb hdpe pipe 40 x 33mm , 1.5inch pvc conduit isi - lms , laying of pvc conduit 1.5inch , laying of fiber , laying of hdpe pipe 40 x 33mm , treanchless digging though hdd machine , splicing of pigtail , fixing and termination of patch panel cat6 , fixing of rack , laying of utp cable , termination of i slash o , termination of patch panel , penta scanning of utp nodes , otdr of fiber, per core , installation and configuration of switches , 3 years camc of active components and modules ) /bid number : gem/2025/b/6469342 * /dated: 22-07-2025 & & / bid document 1 / 33

CTN :43148198

01 Jan, 2026 NA

Calcutta - West Bengal

Tender For supply of cisco x series c9200l switch , patch panel 24p utp , liu module ofc 12 port fully loaded with coupler and connecter , 10g sfp module , 42u rack floor mount rack loaded poer supply and accessories , 9u rack with power supply accessories , rack mount ups 1kva line interactive , i o boxes outlet , ofc patch cord 5m , cat vi cable 305m per box , fiber optic cable 06 armoured core , laying of cat vi utp cable , laying of casing caping and pvc per meter , ofc splicing and joining point to point , utp patch cord , fixing of information outlet , fixing of rack , fixing of liu fixing , 1 inch flexible pipe per mtr , casing and caping 2 per mtr , fixing of 24 port utp cat6 jack panel , pvc self adhesive cable tie tag , rack installation for server room 42u rack.

CTN :42901043

15 Dec, 2025 NA

Pune - Maharashtra

Tender For bid to ras supply of augmentation of stationery and consumables store d d - modular track mounted glide access with metal cladding , laminated faced composite panel cabinet , block work storage module , aluminium framing with water proof composite finish in fluid panel , sculpted pop grid framework , fitment of flexible poly surface floor covering , fitment of contour profile illumination , in-wall fixed storage bay , recessed downcast cob fixture assembly , graphic art work surface treatment , fixture connection set with routing components , surface routing and insulation kit with accessories , protective oil based surface finish , concealed overhead air circulation 4 ton hvac module , wall rack 8ft height with full back closed 18 inch depth base and 3 inch pillar , gandola double rack , frontal end rack , wall channel rack without base wall hanging , shopping trolley 60 liters , point of issue counter 48 inch , surveillance and recording system , card tap and check out with system , visual display unit 55 inch ) /bid number: gem/2025/b/6740707 * /dated: 24-11-2025 & & / bid document1 / 23

CTN :43151452

18 Dec, 2025 1.39 Lacs

Karaikal - Pondicherry

Tender For construction of 476 nos of regular bedded and 81 nos of non complementary bedded jipmer karaikal hospital g plus 5 ht panel cum control room and connecting corridor from existing academic building to hospital building at second floor sh hiring the services of mts service for ae - iii kpd - ii, cpwd karaikal for a period of 6 months (dec - 2025 to may - 2026)subwork/packages:hiring mts service for ae - iii, kpd - ii cpwd, karaikal for a period of 6 months (dec - 2025 to may - 2026)

CTN :43140429

25 Dec, 2025 34.90 Lacs

Khetri - Rajasthan

Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c

Central Government/Public Sector

CTN :43125796

30 Dec, 2025 57.75 Lacs

Pondicherry - Pondicherry

Tender For supply of sitc of cctv access control and rf link with camc for ans facilities at puducherry airport c c -pair of rf link antennas along with lightning arrestors and other mounting accessories , ip based 2megapixel ptz dome camera with ip67 protection , ip based 2mp starlight ir ip h. 265 bullet camera with ip67 protection , 32 channel nvr with 4 sata and 40 tb storage 10 tb x 4 nos in raid 5 configuration , high end workstation for monitoring cctv and access control system , ip based access control devices and associated accessories , 24 port poe indoor managed switch with 4 x 1g sfps , 8 port poe 2x 1g sfp industrial grade managed switch , 16 port poe 2x 1g industrial grade managed switch , 8 port managed l2 network switch with sfp and populated ports and 4 x 10g sfps , floor mount 42u rack with accessories with 02 nos of power distribution units with 10 plug points each , wall mount 9u indoor rack with accessories with 02 nos of power distribution units with 05 plug points each , ip 55 rated 6u outdoor ip55 rack pole mount with rain canopy and accessories , cat6 utp patch cord of 1 meter length , 24 port jack panel fully loaded , indoor cat6 utp lszh cable , outdoor cat6 utp armored cable , sm 12 core armored ofc cable , 24 port liu with fully loaded lc connectors with accessories , lc - lc single mode fiber patch cord 3 meter , 3 core 2. 5 sq. mm armored power cable , 55-inch large format display 24 x 7 operations , camera pole of height 5 meters along with 8 nos of ip55 camera mount boxes , camera pole of height 12 meters for mounting rf antenna and camera along with 2 nos of ip55 camera mount box , 40mm hdpe pipe with required accessories , 25mm pvc electrical pipe with fixing accessories , high-end laptop for trouble shooting and network maintenance , excavation for laying of power and data cables and for mounting camera poles , installation testing commissioning and integration of above items from sl no 1-27 for complete cctv and access control system with rf link and existing ofc network , first year camc after warranty period , second year camc after warranty period , third year camc after warranty period

Central Government/Public Sector

CTN :42645704

17 Dec, 2025 NA

Nashik - Maharashtra

Tender For corrigendum : supply of osaero job work for manufacturing of 99 parts 03 individual package ref semfg624 - p1-1 angle lh-top , p1-2 angle rh-top , p1-3 angle rhbottom , p1-4 longitudinal member nlg jack , p1-5 splice bracket-lh sta-1a , p1-6 splice channel-outerlh , p1-7 fitting-lh rear seat blkd , p1-8 floor side member-aft-lh sta -7 to , p1-9 angle-lh sta -18--19 , p1-10 bracket-rh , p1-11 control column support bracket , p1-12 edge member-rh , p1-13 edge memberlh , p1-14 support member - nlg jack bracket , p1-15 kink bracket-lheqpt floor assy , p1-16 splice-t member-lh sta -16 , p1-17 tee-bot-sta-16 , p1-18 teebot-sta-17 , p1-19 splice-rhsta-17 , p1-20 tee-rh sta18 oxy bay , p1-21 tee-bot-sta-18 , p1-22 splice-lh sta18 , p1-23 locking bracketstep way , p1-24 stepway pedal , p1-25 leveling bracket-fwd , p1-26 leveling bracket-aft-lh , p1-27 bottom bracket-lhengine mount , p1-28 tee-top center -23--25 , p1-29 side member-lh-19--20 , p1-30 tee-rhsta-24-sta-25 , p2-1 frl locator bracket-rhsta-19 , p2-2 angle-lh sta-24 , p23 bracket-y stopper , p2-4 leverlocking bracket , p25 leverlocking bracket , p2-6 leverlocking bracket , p2-7 lever , p2-8 bracket lever , p2-9 auxillary spar-front , p2-10 auxillary spar-rear , p2-11 jacking pad , p2-12 i-s rib -2 center , p2-13 i-s rib -3 fwd , p214 hinge sta-3 flap , p2-15 hinge sta-3 flap , p2-16 hinge sta-7 flap , p2-17 i-s rib -6 , p2-18 fuel tank boundary ribs -7 , p2-19 lg aux. spar fwd , p2-20 lg aux. spar aft , p2-21 hinge sta-12 aileron 0-b , p2-22 fork fitting bal. tab , p2-23 rear spar splice joint , p2-24 i-b hinge sta-3 lh , p2-25 o-b hinge sta-11 lh , p2-26 nose block fixed mass sta-1-sta , p2-27 t-e block m-b lh , p2-28 t-e block o-b , p2-29 trim tab t-e block , p2-30 angle plate support bracket , p3-1 fork fittingbal. tab , p3-2 stopper lh , p3-3 support plate root , p3-4 wow bracket , p3-5 sleeve rh , p3-6 plate , p3-7 boss , p3-8 spacer-unfether pump , p3-9 bracket , p3-10 bell crank lever , p3-11 nut , p3-12 flap , p3-13 prv mounting bracket , p3-14 bracket , p3-15 lever-control lock , p3-16 bracket , p3-17 bracket , p3-18 lever , p3-19 lever , p3-20 strech test bktrear cockpit , p3-21 lever , p3-22 actuator mounting lug , p3-23 lever , p3-24 bracket_lh , p3-25 base bracket , p3-26 lever , p3-27 spacer , p3-28 top bracket-front , p3-29 top bracket-rear , p3-30 flange , p3-31 wedge-qtr panel fc , p3-32 block , p333 bracket connector fitting , p3-34 lever , p3-35 integral lever torque tube , p3-36 lever , p3-37 angle , p3-38 i-s rib -2 aft , p3-39 i-s rib -8

State Government

CTN :43144631

01 Jan, 2026 NA

Anantnag - Jammu And Kashmir

Tender For supply of sand,bajri,boulder,cement 50 kg bag,wall tiles,floor tiles,chemical for tiles,toilet seat english commode,wall mixer,angle value,bib cock,towel rod,mirror 18inx24in,soap case,wash basin,basin mixer,jet spray health foucet,gyser 25 ltr,pvc connection 18in,pvc pipe 4 inch,pvc pipe 3 inch,floor trap,frame for wooden door chowkat,wooden door double,wooden door for bathroom,wooden door,pvc ceiling,fluid panel for wall,wooden floor,ply wood 12 mm 4ftx8ft,wooden jamp,exhaust fan 1200mm,surface pvc 25 mm,pvc pipe 25 mm,ceiling fan 1200 mm,ceiling rose,fan dimmer,mcb 63 amp dp,mcb 40 amp dp,mcb 16 amp sp,mcb 10 amp sp,mcb box 14 way,automatic change over 32 amp,tap roll,screw 1 1 2in,felixiable pipe,16 amp top,bulk head 10 watt,steel wire,wire 7 18,wire 1 mm 90 mtrs coil,wire 1.5 mm 90 mtrs coil,wire 2.5mm 90 mtrs coil,square block,6 amp switch,5 pin socket,indicator,switch blank,16 amp socket,16 amp switch,ss comine box type,8 module plate,6 module plate,4 module plate,12 module plate,concealed light 12 watt,pvc gatt

Interlocking Paver Tile Laying Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government