Latest iron board Tenders | Government iron board Tenders

CTN :39544024

10 Mar, 2025 6.78 Lacs

Chandigarh - Chandigarh

Tender For replacement of old conventional type fittings and electrical accessories in sakhi niwas (working women hostel), sector 24, chandigarh. - dsr item no. 1.15 rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /pvc conduit including dismantling as required., group c, dsr item no.1.28 supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required., 3 module, 4 module, 6 module, 8 module, dsr item no.1.25 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required., dsr item no.1.24 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., 5/6 amps switch, 3 pin 5/6 a. socket outlet, 15/16 amps switch, 6 pin 15/16 a. socket outlet, dsr item no.1.26 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required., dsr item no.1.21 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., 25 mm, dsr item no. 1.17 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required., 3 x 1.5 sq. mm, 3 x 2.5 sq. mm, dsr item no. 1.33 supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required., s/e of 2 x2 led fitting surface type square type with integral/ non integral driver to be installed on existing surface with the help of rawl plug & screws etc. the fitting should be philips / wipro / bajaj / trilux / jaquar/ havells/ crompton/ panasonic/ lt make only. (as per complete item no. 9 of the dnit)., s/i/t/c of 1x18/20watt. led box type fittings made of crca sheet with 1 nos. led tube rods. the fittings should be installed on existing surface. the led tube rod should be of philips/ wipro/ havells/ bajaj/ crompton/ trilux/ panasonic/ lt/ jaquar make of polycarbonate material only. (as per complete item no. 10 of the dnit)., supply & erection of exhaust fan (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, (as per complete item no. 11 of the dnit)., size 12 sweep 900 rpm with louver of havells make turbo force sp / orient make industrial heavy duty / crompton make exhd 380-6-1/ bajaj make supreme dlx/ usha make turbo hdef only., providing and fixing following rating mccb 4 pole 415 volt (thermal magnetic / microprocessor release) without ms enclosure for over load and short circuit protection, 36 ka breaking capacity (ics=100% icu) with positive isolation. (as per complete item no. 12 of the dnit)., 63/100 amp 4 pole mccb (thermal magnetic release)., s/e of ceiling fans with copper winding but without regulator complete with aluminium blades, plastic canopies 2 nos. double ball bearing, ms hanging rods, condenser, reels, clamps etc. (as per complete item no. 13 of the dnit)., size 48 1200mm sweep ceiling fan of havells make velocity white / orient make new breeze / crompton make high speed / usha make striker/ bajaj sabse tezz ee only., s/e of enclosure for following rating mccb 3 pole/ 4 pole made out of 16 gauge m.s. sheet. the enclosure is to be painted after one coat of primer including its erection in existing angle iron board with nut bolts/ screws etc. to complete the job to the entire satisfaction of engineer-in-charge., 100 amp. 4 pole, s/e of led bulk head luminaries weather pro

CTN :39545834

18 Mar, 2025 3.00 Lacs

Ganganagar - Rajasthan

Tender For work of making iron board and making sign board to show municipal land property.

Central Government And Public Sector

CTN :38874243

05 Mar, 2025 53.10 Lacs

Nashik - Maharashtra

Tender For bid to ras corrigendum : supply of transportation of dismantled 2 no. ac units upto 20 km with all accessories incl. hiring of vehicle, manpower etc , transportation of dismantled 3no. to 5 no. ac units upto 20 km with all accessories incl. hiring of vehicle, manpower etc , transportation of dismantled 2 no. ac units from 21 km to 50 km with all accessories incl. hiring of vehicle, manpower etc , transportation of dismantled 3no. to 5 no. ac units from 21 km to 50 km with all accessories incl. hiring of vehicle, manpower etc , transportation of dismantled 2 no. ac units from 51 km to 100 km with all accessories incl. hiring of vehicle, manpower etc , transportation of dismantled 3no. to 5 no. ac units from 51 km to 100 km with all accessories incl. hiring of vehicle, manpower etc , transportation of dismantled 3no. to 5 no. ac units from 100 km upto 200 km with all accessories incl. hiring of vehicle, manpower etc , itc of 1.5 or 2tr window ac unit with properly finshing and minor civil work , itc of wall mounting type 1.5 or 2tr split ac unit with properly finishing and minor civil work , itc of 2x1.5 tr high sensible ac unit with properly finishing and minor civil work , s and f of 1 by 4 inch copper refrigeration pipe , s and f of 3 by 8 inch copper refrigeration pipe , s and f of 1 by 2 inch copper refrigeration pipe , s and f of 5 by 8 inch copper refrigeration pipe , p and w of expanded polyethylene foam tube insulation for 1 by 4 inch copper refrigeration pipe , p and w of expanded polyethylene foam tube insulation for 3 by 8 inch copper refrigeration pipe , p and w of expanded polyethylene foam tube insulation for 1 by 2 inch copper refrigeration pipe , p and w of expanded polyethylene foam tube insulation for 5 by 8 inch copper refrigeration pipe , s and f of prefabricated powder coated heavy duty iron stand having projection arm minimum 600 mm , s and fabrication of m.s. frame made out of various m.s. sections incl. hardwares finishing, painting, minor civil work etc , p and f of 12mm thick prelaminated particle board with decorative lamination on both side flat pressed 3 layer or graded wood particle board , s and l of 4 x 1.5 sq mm copper conductor unarmoured cable of 1.1 kv grade isi mark , s and l of 3 x 2.5 sq mm copper conductor unarmoured cable of 1.1 kv grade isi mark , s and f of 20 mm dia heavy gauge rigid upvc pipe of isi mark , s and f of 25 mm dia heavy gauge rigid upvc pipe of isi mark , s and l of 3 x 2.5 sq mm copper conductor armoured cable of 1.1 kv grade isi mark , s and m end termination with brass compression gland for 3 x 2.5 sq mm size of pvc insulated pvc sheathed or xlpe cu condr armd cable , s and f of 2 way spn mcb db , s and f of 5a to 32a 10ka c curve sp mcb , s and f of 5a to 32a 10ka c curve spn mcb , s and f microprocessor based energy saver unit for controlling the operation of 2 a.c. unit having safety protection, disply, auto, manual mode , repairing of faulty ac controller of ac unit , sand f of electronic ac voltage stabilizer suitable for operation on 130volt to 290 volt for 1.5tr ac unit , installation of spn or tpn mcb db , fixing of sp or spn or dp or tp or tpn or fp mcb , fixing of outdoor condensor stand , fixing of both size of refregerent piping but without heatlone tube , laying of 2 or 3 or 4 core copper conductor armoured or unrmoured cable up to size 4 sq mm. , fixing of cyclic timer , fixing of 20mm or 25mm dia drain water pvc pipe.

CTN :39224751

04 Mar, 2025 NA

Jammu - Jammu And Kashmir

Tender For bid to ras supply of smart driving track - embedded system controller unit arm based processor with quad core on board soc and 64 bit industrial micro controller for multiple signal sensors measurements , customized embedded software to measure the distance comma signal from light comma speed and gear which will communicate to all devices and etc , obstacle name reader industrial ultra high frequency reader with ip66 enclosure with 12v dc input with mounting accessories , distance sensor that is water proof industrial proximity sensor comma distance 2 to 5 meter with metal enclosure with input voltage range from 5 to 30 dc , obstacle name transmitter that is rfid pole for 15 obstacles comma programmed pole with pvc pipe of 75 mm dia and 3 feet height , signal reflector iron board 4 x 4 with 2x4 plate frame to measure the left comma right and back distance , auto electrical wires and flexible hose with accessories , wi fi routers with 4 to 5 hours battery backup , intel core laptop with 14inches display to run training programme , modules for audio and speed , laser jet or ink jet printer , installation charges including inspection, design, civil labour and engineering charges

CTN :39512280

21 Mar, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of iron bars , iron bars stand , short iron board , rope , hook

State Government

CTN :39508725

06 Mar, 2025 2.75 Lacs

Udaipur - Rajasthan

Tender For bid for supply of painted iron boards

CTN :39489844

19 Mar, 2025 NA

Jodhpur - Rajasthan

Tender For supply of combat cloth , iron board 3 by 4 , night sig board , iron box , plastic tarpaulin

State Government

CTN :39485591

03 Mar, 2025 NA

Chandrapur - Maharashtra

Tender For b1/tender/2024-2025/mregs material supply - material items :, 0002-hire charges of concrete mixer 0.25 to 0.40 cum with hopper, 0012-vibrator(needle type 40mm), 0041-joint cutting machine with 2-3 blades, 0295-stone aggregate(singale size):20mm normal size, 0296-stone aggregate (singale size):12.2 mm nominal size, 0324-coal tar, portland cement, brass tower bol 250*10mm, brass 150mm floor door stopper(0.357 kg), oxidised mild steel sliding door boli 250*16mm, synthetic enamel paint, white cement, plastic emulsion paint, coarse sand (zone iv), fine sand, kota stone slab 20mm to 25 mm thick, teak wook in planks, watre proofing material, c i bracket for wash basin and sink, g.i pipes 25 mm dia, g i pipes 50 mm dia, vitreous china orrisa type w.c pan size 580 mm, floating glass sheet of 5.5 mm thick, display board/cib, conveyance, gst, all drive screw (for gypsum board), frosted glass sheet 4mm, flexible pvc waste pipe, aluminium t or l section, binding wirw, turpentine oil, ceramic tiles, metal primer, interlocking c.c paver block, quality control and survey, mr6203-bricks, stone ware pipe 150mm dia, steel tmt fe 500, rubble, hum prope, nylon/pvc gasket, cpcv pipe 15mm dia, plunber with tool kits, aggregate 40mm, socket brass for 32mm tap, soft murum, welder, all frame rail angle anodized, hold fast iron 300*40*5 mm, alluminium section, lock for sliding shutter, all bearing roller, structural steel, oil enamel paint, handle 150mm stainless steel(rounded shape), hinge stainless steel 125mm, steel primer, aldrop, sinc base oil paint, material coast rs.1 per unit, white glazed wash hand basin, pvc connector 15mm dia, steel centering for foundation, steel centering for columns/pillera, steel shuttering for lintel,beams,grider,plinth beam,cantilever, steel shutering for roof ,landing,balcony having 12.5 cm tk, electric vibrator, tiles cutting machine, water tank, stop tap brass with crunch wheel 15mm dia, piller tap 12mm dia chronimu plated heavy, surface vibrator, stoneaggregate 40mm, water profing cement paint, mt vibratory roller for 200mm loose metal, iron square and rectangle pipe, iron circle pipe, iron door with frame and palla, paving block, water proofing liquid, water proofing net, mixer machine with operator, jcb with operator, tiles ceramic, aluminium window, iron window, checkers, door set, tractor-trolly with driver and labour (up to 1km form gp), ms nails (khilla), centring bhada, iron board, ferul, hpl bathroom door, polimer liquid(water proofing), nani trap, toilet seat, comod seat, r.c.c.pipes np2 class 900mm dia, r.c.c.collar np2 class 900mm dia, r.c.c pipes 900 mm dia, worksite facilitie/creche/drinking water/firsy aid, tap 1/2 inch brass, unioun, valve 1 inch, bid cock 1/2, niddle, channel, granite

CTN :39479230

17 Mar, 2025 NA

Jaipur - Rajasthan

Tender For supply of iron board , bed sheet double plain white , pillow cover plain white , duvet , duvet cover , bath towel trident luxery , hand towel trident , nandan terry face towel , dolphy paper dispenser white , m fold tissue paper , polyratan basket small squre , milton carafe flask 2 ltr , bucket 18 ltr , mug 1 ltr , patta tp , dolphy automatic perfume , shirt hanger wooden , clip hanger wooden

CTN :39479171

17 Mar, 2025 1.00 Lacs

Bathinda - Punjab

Tender For supply of acrylic letter with fitting minimum average annual - war memorial pillier sticker set , acrylic letter for photo pillar , acrylic board for unit fmn pillar , acp board ith acrylic letter 16x96 fwc , acp board with acrylic letter 16x96 mandir , flex board with frame standing sports arena , flex printout 10x8 dbn darbar , acrylic letter with fitting , radium sticker iron board 71 sabse pahale , acrylic display board with steel stand , flex board with frame , vinyl printing with fitting 4x3 , acrylic letter with border

Iron Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

State Government