Latest isa angle Tenders | Government isa angle Tenders

Central Government/Public Sector

CTN :39598466

17 Mar, 2025 NA

Yamuna Nagar - Haryana

Tender For supply of hot rolled steel beam, column, channel and angle sections (v2) conforming to is 808 (q3)

Central Government/Public Sector

CTN :39600802

31 Mar, 2025 NA

Bengaluru - Karnataka

Tender For supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial knife sterilize

corporations/Associations/Others

CTN :39620818

17 Mar, 2025 NA

Trivandrum - Kerala

Tender For auction sale of un serviceable diesel and air tanks, fire extinguishers,un serviceable rear and front brake drums,un serviceable miscellaneous auto parts.,un serviceable gear box cases, t- covers, flywheels, etc.,un serviceable trolley jacks, etc.,un serviceable rubber item.,un serviceable clutch disc,un serviceable led destination paannel 6 feet,un serviceable led desttination pannel 3 feet,un serviceable fip parts,un serviceable braze bushes, rivets, synchrocones,steel scrap:- king pins, spring shakle pins, etc,un serviceable spring brackets, shakles, coupling flanges, etc.,un serviceable cylinder liners and broken liners.,un serviceable bearing of all type withsleeves, cones, needles etc.,un serviceable crown and pinion spares,un serviceable front & rear brake chamber,un serviceable propeller shaft,un serviceabe armatures, rotor assy, starter assy, etc.,un serviceable battery cable, copper wire, copper coil etc.,un serviceable electrical motor assembly, etc.,un serviceable gear box assy,scrap iron plates,un serviceable aluminium materials aluminiumradiators and inter coolers,un serviceable metal chip and powder, turning wastes (machine shop),un serviceable gear wheels, main shafts counter shafts, etc.,un serviceable cylinder head,un serviceable cylinder blocks,mixed scrap:- un serviceable shock absorbers, air cleaners, etc.,aluminium materials;- aluminium sheet cut pieces , etc.,iron scrap:- un serviceable angle irons, c-channels, etc,un serviceable volvo wheel disc,un serviceable push back seat frame with cushion, without cushion,un serviceable plastic seats frame with cushion, without cushion

Central Government/Public Sector

CTN :39606668

17 Mar, 2025 NA

Raigad - Maharashtra

Tender For supply of ag 84643 - ismc , channel , 100x50x5 mm , is-2062 , ismc , channel , 150 x 75 mm , is-2062 , ismc , channel , 200 x75 mm , is-2062 , angles 40 x 40 x 5 ms , isa angle , ms , 50x50x6 mm thk , is-2062 , beam ms 100x50 , ismb , i-beam , 150 x 75 mm , is-2062 , ismb , i-beam , 250 x 125 mm , is- 2062 , angles 75 x 75 x 8 , ismb , i-beam , 200 x 100 mm , is- 2062

Central Government And Public Sector

CTN :39598537

17 Mar, 2025 NA

Thane - Maharashtra

Tender For supply of hot rolled steel beam, column, channel and angle sections (v2) conforming to is 808 (q3)

corporations/Associations/Others

CTN :39607077

28 Mar, 2025 NA

Kasaragod - Kerala

Tender For supply of metal table of size 1199 width x 590 depth x 735 height , metal table of size 1365 width x 680 depth x 735 height , steel almirah , executive revolving mid back chair , executive visitor chair , plastic chair , slotted angle rack

CTN :39623748

10 Mar, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of hot rolled steel beam, column, channel and angle sections (v2) conforming to is 808 (q3)

CTN :39622874

29 Mar, 2025 NA

Pune - Maharashtra

Tender For supply of angle iron 50mm x 50mm x 6mm , gi barbed wire , steel tmt 10 mm dia , steel tmt 16mm dia , binding wire , wooden planks 8ft x 9inch x 2 inch , gi punched tape concertina wire , wedling rod , cutting wheel cutting for angle iron 4inch dia , cutting wheel cutting for angle iron 14inch dia