Latest isolation board Tenders | Government isolation board Tenders

CTN :38820669

25 Jan, 2025 NA

Pune - Maharashtra

Tender For supply of godrej interio dual seating 25mm thick-laminated particle board modular extendable conference table

CTN :38786133

14 Jan, 2025 12.50 Lacs

Kochi - Kerala

Tender For supply and installation of pantry furniture at infopark kochi campus - supplying and installing in position pantry table of size 1200 x 900 x 750 mm having 25 mm thick prelaminated particle board, edge banded and stainless steel 304 grade understructure, of colour and shade all similar to the existing tables as approved by engineer-in-charge. the picture and specification with measurements of quoted item should be attached. (approved make: wipro, featherlite, trisun, bosq, mbm, ispace, metafab ), supply and installation of pantry chairs stackable type with polypropylene seat and back and stainless steel 304 grade legs, of colour and shade as approved by engineer-in-charge. the picture and specification with measurements of quoted item should be attached. (approved make: wipro, featherlite, trisun, bosq, mbm, ispace, metafab )

Central Government/Public Sector

CTN :38478441

08 Jan, 2025 59.00 Lacs

Gandhidham - Gujarat

Tender For corrigendum : provn of furniture for md accn for 08 offrs, 09 jcos and 16 ors at gandhidham mil stn - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07) dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mm h.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs., bin linen multipurpose (fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of first class hard wood with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg.all parts where polish require shall be done with glossy finish., chair dining offrs (fd/map-ii/04)all wood must be first class teak wood.overall size shall be 950mm high,450mm wide and 450mm deep.the size of the legs shall be 35x50mm .front and side rails shall be of size 25x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.four teak wood vertical stiffeners of section 20x25mm shall be fixed in back of chair. side frame should be 35x50mm.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.the curved teak wood back shall be of section 25x45mm.all sizes shall be taken as stated in drg. all wood surfaces shall be lacquer polished with high gloss finish of walnut shade.rest all as per drg., chair easy (fd-229)dimension: overall size shall be 510 mm long, 575mm wide and 740mm high .description:- all wood shall be first class teak . front legs shall be 25mmx55mm in section and 355mm high up to seat level. rear legs shall be of 25mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. front, back and side rails of seat shall be out of 25mmx50mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear teak wood arm rests shall be provided at 190mm above seat level and shall be size as shown on drawing.caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. caning shall be done in godrej pattern. pvc shoes 25mmx25mm shall be provided at the bottom of all legs.finish:- all wood surfaces exposed to view when placed in position shall be given high gloss french polish with lacquer finish., chair dining (fd/map-ii/05)dimension:overall size shall be 890mm high, 440mm wide and 430mm deep.description:the size of the legs shall be 30x55mm.front and side rails shall be of size 30x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg. pvc seat 4mm thick of ppcp material and weight not less than 0.50 kgs with perforated holes shall be fixed inside the frame of seat with proper screws.one additional stiffener of size 30x25mm shall also be fixed below the seat for extra suuport of pvc seat.the height of the seat shall be at 460mm high from ground.the size of the teak wood back shall be 45x15mm made out of 45x35mm section.25mm dia and 25mm high nylon buffers shall be provided to bottom

CTN :38760669

14 Jan, 2025 3.36 Lacs

Gwalior - Madhya Pradesh

Tender For supply furniture by moulik nidhi of ward no. 11 and ward samiti no. 07 file no. 35/24x1/3 - high back chair size: total height-1050-1150mm, depth 650mm, width-650mm seat height:440-540mm. 5-prong nylon base for stability. twin wheel heavy duty castor for easy mobility under load. hot pressed ply wood with steel t-nuts for rigid fastening. sturdy steel column gas lift for center support and seat height adjustment. telescopic abs cover over steel column. lockable center tilt mechanism and with single piece integral skin pu arm rest. quality tapestry with pvc beading all around. high density moulded pu cushion. over all appearance of product as shown in picture. upholstery 2.0 mtr, visitor chair with arms size: total height-850mm, depth 570mm, width-550mm seat height:440mm.under structure cantilever type ms cold rolled close annealed tube 1.6 mm thick. hot pressed ply wood with steel t-nuts for rigid fastening. single piece integral skin pu arm rest. quality tapestry.high density pu moulded cushion. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. upholstery 1.5 mt, p/f of good quality plastic chair, heavy duty with handles over all size 580w*590d*880h, daul desk: p/f dual desk of overall length 1020 mm width 900 mm and hight 750 mm, writing top and seat made up 18mm thick particle board frame made up of 1*1 inch thick ms pipe provision of shelf for keeping book, steel frame banch -top wooden bord size 18"h*12"w*72 l strong and durable design to take load up to 400 kg distributed across the length., office executive table size 1220w)x600(d)x750(h) 30 mm thick melamine edge bended top with 18 mm thick melamine edge bended side panels provision of 1 shelf and 1 drawer on one side of the table

CTN :38765301

11 Jan, 2025 NA

Jabalpur - Madhya Pradesh

Tender For supply of particle boards (q3) , prelaminated mdf board (q3)

CTN :38749014

18 Jan, 2025 NA

Bareilly - Uttar Pradesh

Tender For supply of steel tubes, tubulars and other steel fittings as per is 1239 (part 2 - steel pipe fittings) (q3) , flashing tape , wooden beading 18mm , rubber beading for ai door , fevicol 200 gm , white cement make jk , putty for fixing glass , wire mesh 0 point 41mm steel , hydraulic door closer aluminium die cast body between 36 to 60 kg make hardwyn everest godrej , door magnet catcher , curtain rod 25mm dia stainless steel , plywood 8 feet x4 feet x19 mm make green ply or kit ply or century , tank nipple 20mm isi marked , tank nipple 15mm isi marked , gi tubing 15 mm med grade make jindal or tata or surya , gi tubing 20 mm med grade make jindal or tata or surya , gi tubing 25 mm med grade make jindal or tata or surya , cp mixer whb 15mm , pvc ptmt bib cock with nozzle 15mm make polytuff or shakti , waste coupling 32mm dia make essco or pearl or polytuff , pvc connection pipe 15 x 450mm make polytuff or shakti , gate valve 15mm gm make prima or jainko or shakti , gate valve 20 mm gm make prima or jainko or shakti , foam cushion 560x530x100mm make sleepwell or kurlon , prelaminaed particle board 18 or19mm one side teak face , plywood 8 mm 8 feet x 4 feet make kitply or greenply or century , plywood 18mm size 8 feet x 4 feet make kitply or greenply or century , plywood commercial bwr 8 feet x4 feet x 12 mm thick make kitply or greenply or century , prelaminated particle board18mm one side teak 8 feet x 4 feet , sunmica 0 point 8 mm x 8 feet x 4 feet , plywood 3 point 5 oblique 4mm 8 feet x 4 feet one side teakface , plywood commercial bwr 8 mm x 8 feet x 4 feet , varnish in 04 ltrs pack , fevicol in 2 kgs per pkt , varnish clear wood keeper , fevicol in 1 ltrs pack , wooden beading half round 18mm wide , paint black , particle board one side teakface 18mm size 8 feet x 4 feet , french polish in 04 ltrs pack , plywood commercial bwr 8 feet x 4 feet x,6 mm , paint white in 4 ltrs pack , knob fancy type 32mm round

CTN :38754408

20 Jan, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of study table for technical training room , study chair for technical training room , wood particle board glass door almirah for technical training room , wood particle board book shelves for technical training class room , reading stand table for ground crew room , resting device for ground crew room

CTN :38748979

18 Jan, 2025 NA

Bareilly - Uttar Pradesh

Tender For supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3) , plywood commercial 8 feet x4 feet x1 2mm , seat and back for chair cb tubular , plywood one side teak face 8 feet x4 feet x 19 mm , prelaminated board 8 feet x 4 feet x 18 oblique 19mm , block board of size 8 feet x 4 feet x 18 oblique 19mm , plywood commercial 8 feet x4 feet x 4 mm , pvc seat for chair school , plywood commercial 8 feet x4 feet x 6 mm , sunmica 8 feet x 4 feet x 1 mm , foam sheet 6 feet x 3 feet x 100 mm , foam sheet 6 feet x 3 feet x 75 mm , synthetic enamel paint gray 1st quality 4 ltr pack , d type cp handle of size 75mm , wooden french polish in 4 ltr pack , two hole brass lock for almirah , prelaminated particle board exterior grade 8 feet x 4 feet x 9 mm , looking mirror 450mm x 1250mm x 5mm , plywood commercial 8 feet x 4 feet x 6 mm one side teak face , synthetic enamel paint silver 1st quality 4 ltr pack , hasp and staple aluminium 75mm , varnish oil in 4 ltr pack , teak wood beading 18 mm x 4mm , plywood commercial 8 feet x 4 feet x 4 mm one side teak face , stainless steel d type handles 75mm , door magnet catcher size 4x5x4 cm , abressive cloth s 100 no size 25mm x 50mtr , synthetic enamel white primer 4 ltr pack , door magnet catcher size 6 x 2.5 x1.5 cm , cloth malmel 1.2 mtr width , peg set of six brass 100 mm long bea 30 , abressive cloth s 60 no size 25mm x 50mtr , lock brass for drawer with keys for table steel , knob anodised 25mm with screw , hasp and stapple stainless steel 75mm , knob anodised 32mm with screw , brush paint 50mm , stainless steel d type handles 100mm , but hinges steel 100mm , screw wood steel 65x12mm , turpentine oil 5 ltr pack , peg hook brass 125 mm long , but hinges steel 75mm , brush paint 75mm , aluminium d type handles 100mm , sr solution in 200 grm pack , brush paint 25mm , screw wood steel 35x8mm , but hinges steel 50mm , lakh dana , screw wood steel 25x4mm , creosote oil for furniture 1 ltr pack , pilli mitti 400 gm pack , nails wire 2inch , putty for wood works 400 gm pack

CTN :38732140

17 Jan, 2025 NA

Mathura - Uttar Pradesh

Tender For supply of plywood commercial 8 ft x 4 ft x 19mm,plywood commercial 8 ft x 4 ft x 19mm,plywood commercial 8 ft x 4 ft x 19mm,plywood commercial 8ft x 4ft x 12mm,plywood commercial 8ft x 4ft x 12mm,plywood commercial 8ft x 4ft x 6mm,plywood 8ft x 4ft x 6mm bwr grade,plywood 8ft x 4ft x 9mm bwr grade,plywood 6ft x 3ft x 12mm bwr grade,plywood 6ft x 3ft x 12mm bwr grade,plywood 7ft x 3ft x 12mm bwr grade,plywood 8ft x 4ft x 12mm bwr grade,ply wood one side teak face 8ft x 4ft x 6mm bwp grade,ply wood one side teak face 8ft x 4ft x 6mm bwp grade,prelaminated particle board 8ft x 4ft x 9mm mdf,prelaminated particle board 8ft x 4ft x 12mm mdf,prelaminated particle board 8ft x 4ft x 19mm mdf,prelaminated particle board 8ft x 4ft x 19mm mdf,block board commercial 8ft x 4ft x 19mm,top of table 900mm x 600mm,top of table dinning 6 persons,top of peg table,top of table writing,top of table clerk,top of table centre,top of teapoy,top of table dinning 8 persons

Central Government/Public Sector

CTN :38492497

03 Jan, 2025 41.80 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : provn of furniture for 08 offrs 56 jcos/ors md accn at mil stn dharangdhra - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07)dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mmh.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs. make-amko or equivalent, bin linen multipurpose with ironing board(fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of hardwood sheesham with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg., chair dining fd/map-ii/04 (fd/map-ii/04)dimension: overall size shall be 450mm wide x450mm deep and 950 mm height ,450mm high up to seat. description:- (a) all wood to be usd shall be 1st clas hard teak wood (b) the seat of chair shalll be made of 40 density foamcushion having thickness 75mm. the cushion shall be placed and pasted on 12mm bwr plywood as per size of seat duly covered with approved tapestry cloth of rate not less than450mm per mtr. the seat shall be be fixed over the rails and screwed from wood stopper with 30mm long screws.(c) pvc hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screws. rest all specification and dimensions are as per drg. finish:- the chair shall be be polished in high gloss melamine polishin walnut shade after preparation of surfaces., hat stand with mirror large (fd-233)dimension:overall size shall be 1330 mm long, 710mm high.description:the inner frame shall be of 50mmx20mm teak wood battens six in nos .the back and front of frame shall be covered with 6mm thick commercial ply.the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive.six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg.5mm thick looking mirror of (saint gobian,modiguard/atul) shall be provided as shown on drg with beading alround . mild steel key plate shall be provided at both top corners of the hat stand.finish: all teak wood surfaces shall be given high gloss french polish with lacquer finish. all steel surfaces shall be painted with two coats of enamel paint over a coat of primer. rest all as per drgs, peg table (fd-384)dimension; overall size shall be 450mm long,300mm wide and 380mm high.description: legs shall be of teak wood of section 30mmx50mm.the legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.two bottom rails of size 20mmx40mm shall be fixed between the legs .a centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.top of the table shall be of 18mm thick pre-laminated mdf board with 4mm teak wood edging all round the top of table.finish: all wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish.rest all as per drg., receptacle pvc small (fd/e6/map/13)dimension/capacity:-the receptacle shall be of capacity 20 ltrsdescription:the body of receptacle pvc shall be made up of thick polymer plastic of thickness not less than 2.5mm,provided wit

Isolation Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector