Latest jointing box Tenders | Government jointing box Tenders

State Government

CTN :43539595

21 Jan, 2026 NA

Kannur - Kerala

Tender For disposal of old and unserviceable scrap items under various substations vacccum cleaner damaged , annunciator faulty , static relay faulty , mechanical relay faulty , 66kv 10mvar reactor faulty , rubber tyre scrap , prv damaged , tube light damaged , la counter , 11kv cable end , electrical kiosk and panel scrap 85kg , oil barrel empty damaged , fire wood , brush cutter engine (scrap) , disc insulator (unserviceable) , ups damaged , battery charger 110v,20a scrap (@ptru) , ac (asbetose)sheet (dismantled) , 11kv vcb bottle , 11 kv xlpe 3*300mm2 ug cable (3 pieces) , 11kv cable, 1 500 sq mm , 80mm buchholz relay with gasket (faulty) , rusted earth wire , mettalic 33kv cable drum (old scrap) , empty oil barrel (damaged) , battery charger, 110v, 15a , iron scrap , 11kv xlpe cable 3x300mm2 , 11kv xlpe lug cable 10x 500mm2 , 9mtr psc pole damaged , spring charge motor for alind make outdoor vcb faulty , disc insulator 90kn , acsr scrap , lt control panel , window frame (iron scrap) , 11kv insulator , 3x 300 mm2 11kv xlpe cable bits , vacuum interrupter for 11kv 630a dismantled (11kv vcb bottle) , copper scrap , aluminium scrap (acsr conductor) , control cable aluminium scrap , control cable copper scrap , 11kv 3x300 sqmm xlpe cable , space heater(13no=2.47kg) , 3ph 4 wire energy meter-/5a secure permier 300 faulty , 11kv ab switch faulty , cr panel for 33kv side of 110/33 kv transformer (iron scrap) (1no=230kg) , gi strip 50x6 mm (various small lengths) , acsr scrap , 11kv xlpe 1x500 sqmm outdoor termination kit (faulty) , iron scrap , mechanism box for isolator assembly (25kg iron scrap) , mechanism box for earth switch(35kg iron scrap) , 11kv xlpe 1x500 sqmm damaged , 11 kv vaccum bottle (scrap) , gi earth wire bits dismantled , empty oil barrel , 11kv disc insulator 45kn (old and used) , flurescent tube choke , sodiunm vapour lamp fitting (faulty) , aluminum clamp scrap , alumiunm conductor scrap , copper scrap , empty oil barrel , insulator stack for 110kv isolator(27 insulators) , copper control cable cut bits , helmet(unusable)(plastic-4.5kg) , relay (used & unserviceble) , earth discharge rod(used) , volt meter(faulty) , aluminium control cable cut bits , s/s hardware fitting for aaac(22nos/24.12 kg) , vibration damper for aaac(45 nos/103.5 kg) , s/t hardware fitting for aaac(24 nos/16.8 kg) , steel tail clamp 7/3.15mm for earth wire(16 nos/1.8 kg) , gi lug for earth wire 7/3 mm(324 nos/85.5 kg0 , 25mm ms rod scrap , gi strip 50x60mm , 3cx 300 mm2 ug cable armoured- scrap cut pieces , alluminum alloy scrap , breather faulty scrap , disc insulator 70kn , s/s hardware fitting w/o arcing hon for tiger conductor , s/t hardware fitting w/o arcing horn for tiger conductor , damaged disc insulator

corporations/Associations/Others

CTN :43571513

22 Jan, 2026 38.26 Lacs

Delhi - Delhi

Tender For supply and making of gis end termination kit, outer cone and inner cone type, suitable for 33kv, h.t. 400 sqmm 3c xlpe cable.

State Government

CTN :43550453

22 Jan, 2026 NA

Pune - Maharashtra

Tender For supplying & erecting 3x300 sq.mm 11kv xlpe(ue) armoured cable for 11/3.3kv switchyard at venawadi lift irrigation scheme, dist-pune

State Government

CTN :41885116

02 Feb, 2026 5.00 Lacs

Rajkot - Gujarat

Tender For corrigendum : annual contract for 11 kv xlpe cable fault detection under rajkot rural division office and its all sub division office under rrd

State Government

CTN :43524608

04 Feb, 2026 30.00 Lacs

Jamnagar - Gujarat

Tender For corrigendum : providing and fixing of isi standard heat shrinkable type outdoor cable box, suitable for 11 kv xlpe /aerial bunch cable for various sub-divisions under city-1 division, jamnagar

corporations/Associations/Others

CTN :43380693

28 Jan, 2026 5.23 Lacs

Vadodara - Gujarat

Tender For corrigendum : bi-annual rate contract for providing & fixing of 11kv heat shrinkable type xlpe cable termination kit at various s/s under tr circle, jambuva, on as and when required basis

State Government

CTN :43340681

28 Jan, 2026 70.00 Lacs

Wayanad - Kerala

Tender For corrigendum : ridf xxviii - lift irrigation projects in various padashekharams of wayanad district- procurement of submersible pumpsets, fittings, accessories, and related electrical works - procurement, installation, erection, testing, and commissioning of pumpsets and allied works at punchavayal, manikkuni, kolembetta, valiyavattam, and padiyeri pumphouses. - procurement, installation, erection, testing, and commissioning of pumpsets and allied works at punchavayal, manikkuni, kolembetta, valiyavattam, and padiyeri pumphouses., supply, installation, erection, testing, commissioning and fitting charges for all accessories of horizontally mounted submerged centrifugal non clog pump set of compact unitary mono-block submerged single/multi stage,volute type casing with suitable radial type impellers on common shaft for pump and motor ,anti friction bearing with life time greasing, protection features with sensors to monitor temperature,mechanical seal leakage ,etc.(the pump should be confirming to his/is standards).the moc of pump,casing-cast iron,impeller -ss cf8m,shaft-ss-316,suction strainer -ss and other as per is standard.the motor should be suitable for 3 phase,415v /-10%,50hz /5%,ac supply submersible motor having class f /h insulation, air filled and ip-68protection confirming to is 325 or latest standards suitable for day night operation.the pump discharge capacity of 230 cubic metre /hour against duty point head of 42 mtrs, working head range 18 - 47m, discharge range 136 - 57 lps ,speed 1450rpm(n) or nearer ,with 10meters of copper power cable and control cable, railing arrangement. the pump should be painted with three coats of suitable anti corrosive paint over priming coat. the electrical works for the pumpset should be completed as per kseb rules and regulations and the contractor is responsible for arranging premissions and certificates from the electrical inspectorate. the suction side of the pumpset should be provided with an additional iron grill for preventing foreign particles inside the inlet side of the pump casing., supply and erection of 60hp auto transformer starter (ats) with suitable incommer and contactors including 24 kvar capacitor with required indications ,metering and protections for single phasing ,overload, pump monitoring unit to protect from ingress, high temperature level etc enclosed in a closed panel board, supply and laying additional termination cable of 1.1kv 3.5 core 95sqmm aluminium conductor xlpe insulated ;steel armoured ug cable as per relevant is 7098 with support for cable, supply, installation, erection, testing, commissioning and fitting charges for all accessories of horizontzlly mounted submerged centrifugal non clog pump set of compact unitary mono-block submerged single/multi stage,volute type casing with suitable radial type impellers on common shaft for pump and motor ,anti friction bearing with life time greasing, protection features with sensors to monitor temperature,mechanical seal leakage ,etc.(the pump should be confirming to his/is standards).the moc of pump,casing-cast iron,impeller -ss cf8m,shaft-ss-316,suction strainer -ss and other as per is standard.the motor should be suitable for 3 phase,415v /-10%,50hz /5%,ac supply submersible motor having class f /h insulation, air filled and ip-68protection confirming to is 325 or latest standards suitable for day nightoperation.the pump discharge capacity of 188 cubic metre /hour against duty point head of 35 mtrs,working head range 16 - 42m, discharge range 102 - 42 lps ,speed 1450 rpm(n) or nearer ,with 10meters of copper power cable and control cable,railing arrangement. the pump should be painted with three coats of suitable anti corrosive paint over priming coat. the electrical works for the pumpset should be completed as per kseb rules and regulations and the contractor is responsible for arranging premissions and certificates from the electrical inspectorate. the suction side of the pumpset should be provided wi

State Government

CTN :43571485

24 Jan, 2026 3.07 Lacs

Bilaspur (Hp) - Himachal Pradesh

Tender For (sh. providing and fixing copper cable single core 70mm2, 25mm2, xlpe 300 mm ht aluminium cable and main switch for 75 hp and 60 hp motors with allied accessories).

Private Sector

CTN :43626069

23 Jan, 2026 NA

Mumbai - Maharashtra

Tender For epc of 110kv 1-core 630 sqmm copper xlpe lead sheath cable along with associated accessories providing power supply to 110kv western railway dahisar tss from borivali rss

State Government

CTN :43643714

28 Jan, 2026 NA

Ranga Reddy-T - Telangana

Tender For estimate for providing interlinking line between 11kv bhavani colony feeder and 11kv sridevi colony feeder by laying of of 11kv 3x185 sq.mm xlpe ug cable (single run) for a distance of 530mtrs in shivarampally section of rajendranagar sub-division in rajendranagar division in rajendranagar circle under t<(>&<)>d improvements to original works(summer action plan 2026) de/rjnr- 40/2025-26

Jointing Box Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors