Latest kerbstone Tenders | Government kerbstone Tenders

Central Government/Public Sector

CTN :44975188

11 May, 2026 NA

Multi City - Multi State

Tender For supply and installation of acp panels on transit camp, control room, and residential quarters building and replacement of kerbstone at 220/66 kv drass sub-station of powergrid

Central Government/Public Sector

CTN :44977944

04 May, 2026 7.69 Lacs

Jharsuguda - Odisha

Tender For urgent works nearby helipad area for dust suppression through garden development with stone pitching and miscellaneous work under bit of lakhanpur area

State Government

CTN :44978465

13 May, 2026 1.00 Crore

Dindori - Madhya Pradesh

Tender For sand ballast bricks stone dust hard moorum

State Government

CTN :44959654

30 Apr, 2026 1.00 Crore

Jaisalmer - Rajasthan

Tender For close graded gsb material as pert table\400.a , aggregates 45 mm to 2.8mm , , aggregates 6 mm nominal size , , stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve. , , cost of water , , ghadla kankar/jhajhra , , mud masala , , lime from bud kiln for lime masonry work , , cement , , ppc , , white cement , , fine aggregate , , sand gravel , , gravel - local , , rakhi (fly ash) , , surkhi , , stone dust (in masonry) , , ballast stone/brick (for other than road work) , , cut 40mm measuring stone wads (hand-broken grit 1/11) , , 40mm stone brittle (crushed) (cut voids 1/11) , , 20mm stone brittle (crushed) , , 12/10/6mm stone prints (crushed) , , brick mortar , , material for road work (5 km (including lead)) , , 63-40 mm crusher broken stone crushed (cut voids 1/11) , , 63-40 mm hand-broken stone aggregate (cut voids 1/11) , , 90-45 mm hand-broken stone aggregate (cut voids 1/11) , , quarry rubbish (cut the voids 1/6) , , gravel (voids cut 1/6) , , conker (cut voids 1/6) , , binding material (im 4-6) (cut voids 1/6) , , it (22.5 x 11 x 7.50 cm) , , first class , , ii class , , soling / khareja / masonry stone , , chinai beradda (rr) , , masonry rubble (cr) , , kharanja soling (for floor work up to 15cm height) , , kharanja soling (23cm height for road kharanja work) , , jodhpuri type stone slabs/bows/slabs (length 2-3", width 10-12", thickness 2.5-3.5") , , flaky material (3-4" thick & length and width 1-2") , , sandstone (dpc, sill, coping, lintel, tand, almirha etc.) , , up to 25mm thickness , , up to 25-40mm thickness , , up to 40-50mm thickness , , up to 50-75mm thickness , , up to 75-100mm thickness , , up to 100-150mm thickness , , flooring / patti patan katla stone , , floor slabs upto 35mm thick, min. 3 sqft or more area , , katla for patti patan 60-75mm thickness, min. 3 sqft or more area , , unpolished rough kota stone , , up to 900 sq cm , , up to 300 sq cm , , more than 2300 sq cm , , marchat chips , , martha powder , , marbat stone (rajnagar quality local 20 thick) , , 401 to 2000 sq cm , , up to 900 sq cm , , more than 2300 sq cm , , paler frame , , ekat paitam size 100 x 15 mm. , , paitam size 125 x 75 , , stone slabs , , upto 1.5 mg , , 1.5 to 2.40 m length , , 24m 10.30 m lagrick , , above 3.0 m length, mick , , precast tiles/makes , , glared size 300045 cm , , mosaic site-40thick , , virified size-60 , , interlock tie brick/block for road work , , cenost interlocking block m-30grade, 6 thick , , consent intarlocking block m-3lgrade, thick , , consent itarlocking block m-30grade, 100thick , , isi marked of frp insulated copper conductor compatible core , , 1.50 mm , , 1.00 pm , , local wood may fittingsha (for door and window furniture) , , factory made crackers (30 thick solid core single leaves) , , iron (tor rahit 1415500 rest , , widening vapor 18 gauge , , iron guard , , konia lohachoker saria leafy apple , , barbed iron wire (sine 12 gauge wire and 12 gange strad/12 guage wine and 14 gauge strad 14 ago , , iron species (24 or 14 pieces) , , cement concrete lattice sky patal 40mm thick , , 3mm thick glass , , complexion belly , , award winning paint , , disstep (water bound) , , for roasting (aras/kali) , , primer for iron rods , , gi sheet, mm thick , , g.i. sheet 22 gauge 0.80 m.m.) , , rustus cement mother 6m(2.5/2.75x1m) , , other posts , , pvc sheet thick (plain colour) , , green yellow literoof expo baddar (183090) , , pipe , , gi 15 mm diameter class) , , g.i. 20mm diameter b class) , , gi 25 mm diameter class) , , ac 19 mm diameter , , ac 100mm diameter , , pvc 90 mm diameter (including ring) , , pvc 110 mm diameter (including ring) , , pvc 140 mm diameter (including ring) , , p.c. 110 mm (2.5 kg/s) with coupler , , indian w.c. , , orrisa w.c. , , european w.c , , foot re , , the urinal was 430*350*300mm in size. waste pipe , , stone screw pipe 100mm. m samba , , cp pitar kaal (a 15 mm) (s mark , , p dib kak155 mak , , 125 mm diameter pipe , , aarti is our pipe and we are

CTN :44956279

01 May, 2026 NA

Shimla - Himachal Pradesh

Tender For supply and stacking of stone chips 22.40 mm , supply and stacking of stone chips 11.20 mm , supply and stacking of stone chips 6.70 mm , supply and stacking of sand/stone dust

CTN :44956283

01 May, 2026 NA

Shimla - Himachal Pradesh

Tender For supply and stacking of stone chips 22.40 mm , supply and stacking of stone chips 11.20 mm , supply and stacking of stone chips 6.70 mm , supply and stacking of sand/stone dust

CTN :44801796

24 Apr, 2026 NA

Shimla - Himachal Pradesh

Tender For corrigendum : supply of stone metal 40 mm , stone dust/river sand

Central Government And Public Sector

CTN :44455282

23 Apr, 2026 24.43 Lacs

Bellary - Karnataka

Tender For bid to ras supply of supply of good quality undressed granite stone of size 0.90 to 1.50 m length, 0.45 to 0.60 m width, 10 cm thickness as directed by the site in charge., supply of good quality brick jelly of 20 mm free from all impurities as directed by the site in charge., supply of good quality river sand to be dense, clean, and free from dust, clay, silt, organic matter, and other deleterious materials like mica or soft fragments as directed by the site in charge., supply of good quality un-slaked lime as directed by the site in charge, supply of good quality gallnut as directed by site in charge., supply of good qualityjaggery as directed by site in charge.

State Government

CTN :44944164

29 Apr, 2026 NA

Ranchi - Jharkhand

Tender For partner empanelment & supply of manufacturing consumables - 3d printer filament, 1.75 mm thick pla filament( 1 spool), acrylic pvc solid pipes, ø26, acrylic pvc solid pipes, ø40, aluminium plate, size- 100 x 20 mm, aluminium plate, size- 60 x 60 mm, aluminium rod, ø26, aluminium rod, ø40, bo motor, 60 rpm, (single shaft) straight, sharp buzzer, works on 3 to 27 volts dc (big), capacitor, 1000uf, capacitor, 0.1uf, carbide insert, tcmx 160404en, tcmx 160408en, tcmx 160412en, carbon brush, ag 4, chop saw cutting wheel, thickness-3mm, wheel bore-25.4 ,wheel, dia-355mm, cutting wheel, wheel bore-16mm , wheel dia-105 ,wheel, thickness-1.2mm, dust mask / welding respirator, disposable foam ear plugs, one size fit for all ears, made of non, irritant and allergy free material, available with nylon or cotton cord., earthing holder, 200 amp, electrode holder, capacity- 200 amp, emery sheet, grit 180 - 500, emery sheet, grit 600 - 800, gear oil, servo premium cf-4 15w-40, grinding wheel ,wheel bore-16mm wheel dia-105, wheel, thickness-1.2mm, grinding wheel dresser (diamond 1 carat), grinding wheel 4'', make- bosch/taparia or equivalent, grinding wheel 5'', make- bosch/taparia or equivalent, grinding wheel 7", make- bosch/taparia or equivalent, circular saw blade(cutting wheel) for steel cutting (4") , make-, jk/ bosch/taparia, circular saw blade(cutting wheel) for steel cutting (5") , make-, jk/ bosch/taparia, circular saw blade(cutting wheel) for steel cutting (7") , make-, jk/ bosch/taparia, tungsten rod length 150 mm , thickness 2.4mm, hacksaw blade, size- 300 × 12.5 × 0.6 mm 14tpi (bimetal), hacksaw blade, size- 300 × 25 × 0.6 mm 14tpi (bimetal), hand gloves pair (rubber coated cotton gloves) / esd gloves, (electric static devices), hss tool bit, 14 mm, i.r transmitter bc547, ic 555, ic 7805, leather welding apron, apron with strap and buckle, masking tape (24mm *20m), co2 gas cylinder for mig welding, capacity- 30 kg, ms flat, 50 x 5 mm, ms flat, 50 x 10 mm, ms rod, ø28, ms rod, ø40, ms square (solid), 12x12 mm, oil stone (rough/smooth), paint brush, 0 size, plastic sample collector, 100 ml, plastic zip lock pouch, 6 inch × 4 inch, power saw blade, 14" × 1¼" × 16" (bimetal), resistor, 47 kω, resistor, 4.7 kω, resistor, 500ω, resistor, 220 ω, safety goggles (transparent), safety glasses with side shields,, material-polycarbonate hard-coated lens for scratch resistance,, make- 3m / karam / dupont / udyogi or equivalent, safety helmet, rachet type with plastic cradle, make - karam/dupont/3m/udyogi or equivalent, sanding wheel (emery), wheel bore-16mm wheel dia-125 wheel, thickness-1.2mm, ir sensor , photodiode reciver, single strand wire, red, single strand wire, black, soldering wire, lead (oswal) 60 : 40 (50 gm), surface grinding wheel , outer dia: ø200, bore dia: 30 mm, switch, tap, m 6, tap,m 8, tap, m 12, transformer, 6-0-6/500ma, transistor, c1383, triangle file, 150 mm (medium), tungsten electrodes thoriated tungsten, wt20 2.0 mm x 150, mm, u-channel, 100x10 mm, v-belt, b780 / b29, v-belt, b 26 / b703, vero board, 140 mm × 90 mm, vertical milling cutter insert, sdmt 120412pdrmh, voltage regulator, 7805, anti rust spray, wd 40, capacity- 400ml or more, welding electrode, 350 mm x 1.6 mm, welding helmet, full face covering with minimum protective, shade no. 8 or 10, welding helmet, equipped with a flip up front window that the user can choose to, open when not performing an operation.has removable lens, which is tested against en 175 and en 169.the head band of, welding helmet has 4 adjustment positions and is provided with, an anti-sweat comfort pad for increased comfort. consists of, ratchetadjustment for easy harness adjustment., material-high impact resistant polycarbonate for increased, protection; material of shell: polypropylene impact resistant shell, that can be adjusted and tested for electrical insulation., size of window 100mm x 75mm, operating range-50 0c to+800c and tested for electrical, insulation., certified to

State Government

CTN :44950186

01 May, 2026 50.00 Lacs

Nagaur - Rajasthan

Tender For close graded gsb material as pert table\400.a , aggregates 45 mm to 2.8mm , , aggregates 6 mm nominal size , , stone crusher dust finer than 3mm with not more than 10% passing , , 0.075 sieve. , , cost of water , , ghadla/kakar/jhajhra , , mortar/mud mixture , , kali kiln lime for lime masonry work , , cement , , ppc , , white cement , , fine aggregate , , sand/gravel , , gravel - local , , rakhi (fly ash) , , happy , , stone dust (in masonry) , , ballast stone/brick (for other than road work) , , 40mm measuring stone (hand-broken grit) (cut voids 1/11) , , , , 40mm grit stone (crushed) (cut voids 1/11) , , 20mm grit stone (crushed) , , , , 12/10/6mm grit stone (crushed) , , , , brick chips , , road work material (5 km, including lead) , , , , 63-40 mm crusher broken stone crushed (cut voids 1/11) , , 263-40 mm hand-broken stone aggregate (cut voids 1/11) , , , , 90-45 mm hand-broken stone aggregate (cut voids 1/11) , , , , quarry rubbish (cut the voids 1/6) , , gravel (voids cart 1/6) , , conker (cut voids 1/6) , , binding material (pi4-6) (cut voids 1/6") , , brick (22.5 x 11 x 7.50 cm) , , first class , , ii class , , soling / kharanja / masonry stone , , chinnai berdha (rr) , , masonry rubble (cr) , , kharanja soling (for floor work up to 15cm height) , , kharanja soling (23cm height for road/kharanja work) , , jodhpuri type stone slabs/arches/slabs (length 2-3', width 10-12", thickness 2.5-3.5") , , stone chips (flaky material) (3-4" thick & length and width 1-2" sandstone (dpc, sill, coping, lintel, tand, almirha etc) , , up to 25mm thickness , , up to 25-40mm thickness , , up to 40-50mm thickness , , up to 50-75mm thickness , , up to 75-100mm thickness , , up to 100-150mm thickness , , flooring / patti patan katla stone , , floor slabs upto 35mm thick, min. 3 sqft or more area , , katla for patti patan 60-75mm thickness, min. 3 sqft or more area , , unpolished rough kota stone , , up to 900 sq cm , , 901 to 2300 sq cm , , more than 2300 sq cm , , polished kota stone (one side polished) , , up to 900 sq cm , , 901 to 2300 sq cm , , more than 2300 sq cm , , marble stone (makrana adanga 20mm thick) , , up to 900 sq cm , , 901 to 2300 sq cm , , more than 2300 sq cm , , marble chips , , marble powder , , marble stone (rajnagar || quality/local 20mm thick) , , up to 900 sq cm , , 901 to 2300 sq cm , , more than 2300 sq cm , , stone frame , , single patam size 100 x 75 mm. , , double paitam size 125 x 75 mm. , , stone slabs , , jp to 1.5 m length, minimum 40mm thick , , 1.5 m to 2.40 m length, minimum 50mm thick , , 2.4 m to 3.0 m length, minimum 65mm thick , , above 3.0 m length, minimum 75mm thick , , precast tiles / blocks , , glazed size-30x45 cm , , mosaic size-40mm thick , , vitrified size-60x60 cm , , nterlock tiles/brick/block for road work , , cement interlocking block m-30grade, 60mm thick , , cement interlocking block m-30grade, 80mm thick , , cement interlocking block m-30grade, 100mm thick , , fr pvc insulated copper conductor single core cable isi marked , , local wood with fittings (for doors, windows and furniture) , , mango , , acacia , , other , , factory made doors (30 mm thick, solid core single pane) , , structural steel , , iron (or steel fe 415/500 for reinforcement) , , winding wire 18 gauge , , iron guard , , conical iron/squared bar/patti/angle iron , , barbed iron wire (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage , , forged , , iron mesh (24 gauge, 14 mesh) , , cement concrete lattice sky patal 40mm thick , , glass , , -3mm thick glass , , color paint , , inamil paint , , 2 distemper (water bound) , , 3 lime - for ptai (aaras/kali) , , 4 primer (for iron/wood) , , 3 petroleum products , , 1 diesel hsd , , 2 mobil oil , , 3 bitumen shalitax board (25 mm thick) , , 4 plain sheets , , 1 gi sheet 22 gauge (0.80 mm) , , 2 gi sheet 24 gauge (0.63 mm) , , 3 ms sheet 22 gauge (0.80 mm) , , 4 ms sheets 24 gauge (0.63 mm) , , 5 corrugated sheets , , 1 gi sheet 1 mm thick

Kerbstone Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Central Government And Public Sector

State Government

State Government