Latest kettle element Tenders | Government kettle element Tenders

Central Government/Public Sector

CTN :39822931

14 Apr, 2025 NA

Bengaluru - Karnataka

Tender For supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial knife sterilize

CTN :39817333

09 Apr, 2025 3.57 Lacs

Multi City - Karnataka

Tender For supplying of kitchen utensils and equipments required for the hostels in the premises of vijayanagara sri krishnadevaraya university, jnanasagara campus, ballari

CTN :39760544

28 Mar, 2025 9.28 Lacs

Multi City - Multi State

Tender For upgradation of infrastructural facilities for regional training institute chennaisubwork/packages:sitc of kitchen equipments and exhaust and fresh air system to the rti cpwd kk nagar

CTN :39760276

27 Mar, 2025 13.75 Lacs

Delhi - Delhi

Tender For repair and maintenance of ac plants and equipments installed in pms office, south block, new delhi. (sh: providing services for operation and routine maintenance of kitchen exhaust system, etac and ptac units at pmo.)

CTN :39742846

26 Mar, 2025 18.40 Lacs

Multi City - Multi State

Tender For maintenance of e&m services at supreme court of india new delhisubwork/packages:comprehensive annual maintenance of kitchen equipments

State Government

CTN :39746829

26 Mar, 2025 8.49 Lacs

Pondicherry - Pondicherry

Tender For supplying and installation for kitchen equipments at rggwch, puducherry.

corporations/Associations/Others

CTN :39730913

08 Apr, 2025 2.25 Lacs

Delhi - Delhi

Tender For tender for supply of camc of kitchen equipments and png pipeline - 02 nos dough kneading machine , 05 nos food service trolley , 01 nos pulvanizer , 02 nos mixer grinder , 01 nos potato peeler , 02 nos refrigerator , 01 nos exhaust hood with centrifugal blower , 01 nos chapatti plate cum puffer , 01 nos six burner cooking range , 03 nos digital weighing machine , 01 nos internal png pipeline and spares with paint

CTN :39743980

26 Mar, 2025 6.36 Lacs

Multi City - Karnataka

Tender For supply of material and machinaries for the construction of a kitchen at the kannada higher primary school in ramathirtha village - pvc pipe of 4kgcum75 mm morb35, ceramictiles 30x 30 cms morb25, providing and installing of pre painted galvalume iron trapezoidal profiled sheet, providing and fixing in position brass bib cock of approved quality 20mm nominal bore, providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm, fabricating, supplying and erecting m.s. tubulartruss, providing and fixing in position black cuddapah slab / shahabad slab / thandur blue slab 4 cms thick, providing and fixing glazed vitrified tiles of approved make, quality and colour of size 600x600x10mm thick, providing and fixing in position in cement concrete steel glazed windows and ventilators side hung/top hung fully openable as per approved drawings, providing and applying two coats dry distemper of approved brand, and shade on wall surface including priming coat and whitening after throughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications, providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specificaiton, atn9 hom of vibrator 0.71 days, atn8 plasticizer / super plasticizer, atn7 mixer (concrete) - 1 cum capacity, atn6 portland cement, atn5 broken stone aggregate 12 mm to 10 mm size, atn4 broken stone aggregate 20 mm size, atn3 broken stone aggregate 40 mm size, atn22 burnt bricks class 35 (non modular), atn2 coarse sand (zone iii), atn15 mixer (concrete small used in culvert), atn14 bond stone 20 x 20 x 45 cm, atn13 rubble stones, atn11 binding wire, atn10 tmt bars fe 500, atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, atn30 providing and fixing in position fully panelled matti / nandi wood shutters for doors, stylesand rails of 30mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as perdrawing and panels of 20mm thick including cost of materials, labour, hom of machineries complete asper specifications. ( excluding cost of fixtures ), atn26 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for chejja, atn46 providing and placing on terrace, polyethylene water storage tanks with manhole lidand suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flowpipes, including cost of all materials, labour, transport charges, hom of equipments and testingcomplete as per specifications.(for 1000 litre capacity) as per is 12701 1996. specification no.kbs13.22, atn39 providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications., atn29 providing matti / nandi wood frames of doors, windows, clerestory windows, ventilatorsand other frames, wrought, framed or assembled including making plaster groves ( excluding cost ofcement concrete and side clamps ), but including cost of materials, labour, hom of machineriescomplete as per specifications., atn28 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for roof slab, atn25 providing and removing centering, shuttering, strutting, propping etc., for beams

CTN :39743981

26 Mar, 2025 6.36 Lacs

Multi City - Karnataka

Tender For supply of material and machinaries the construction of a kitchen at the kannada higher primary school in bannur village of athani taluka - pvc pipe of 4kgcum75 mm morb35, ceramictiles 30x 30 cms morb25, providing and installing of pre painted galvalume iron trapezoidal profiled sheet, providing and fixing in position brass bib cock of approved quality 20mm nominal bore, providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm, fabricating, supplying and erecting m.s. tubulartruss, providing and fixing in position black cuddapah slab / shahabad slab / thandur blue slab 4 cms thick, providing and fixing glazed vitrified tiles of approved make, quality and colour of size 600x600x10mm thick, providing and fixing in position in cement concrete steel glazed windows and ventilators side hung/top hung fully openable as per approved drawings, providing and applying two coats dry distemper of approved brand, and shade on wall surface including priming coat and whitening after throughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications, providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specificaiton, atn9 hom of vibrator 0.71 days, atn8 plasticizer / super plasticizer, atn7 mixer (concrete) - 1 cum capacity, atn6 portland cement, atn5 broken stone aggregate 12 mm to 10 mm size, atn4 broken stone aggregate 20 mm size, atn3 broken stone aggregate 40 mm size, atn22 burnt bricks class 35 (non modular), atn2 coarse sand (zone iii), atn15 mixer (concrete small used in culvert), atn14 bond stone 20 x 20 x 45 cm, atn13 rubble stones, atn11 binding wire, atn10 tmt bars fe 500, atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, atn30 providing and fixing in position fully panelled matti / nandi wood shutters for doors, stylesand rails of 30mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as perdrawing and panels of 20mm thick including cost of materials, labour, hom of machineries complete asper specifications. ( excluding cost of fixtures ), atn26 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for chejja, atn46 providing and placing on terrace, polyethylene water storage tanks with manhole lidand suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flowpipes, including cost of all materials, labour, transport charges, hom of equipments and testingcomplete as per specifications.(for 1000 litre capacity) as per is 12701 1996. specification no.kbs13.22, atn39 providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications., atn29 providing matti / nandi wood frames of doors, windows, clerestory windows, ventilatorsand other frames, wrought, framed or assembled including making plaster groves ( excluding cost ofcement concrete and side clamps ), but including cost of materials, labour, hom of machineriescomplete as per specifications., atn28 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for roof slab, atn25 providing and removing centering, shuttering, strutting, propping etc., for beams

CTN :39713929

07 Apr, 2025 67.54 Lacs

Thiruvarur - Tamil Nadu

Tender For providing kitchen equipments and its accessories for two mess block of boys hostel and girls hostel cutn thiruvarursubwork/packages:providing kitchen equipments and its accessories for two mess block of boys hostel and girls hostel cutn thiruvarur-supplying, installation, testing, and commissioning of 100 kg/hr gas-operated steam boiler for kitchen application including all accessories etc., as required.a) gas-operated steam boiler.design: coil type, forced circulation typemaximum steam output (@100deg c): 100 kg/hroutlet steam condition: dry, saturatedmax. working pressure: 10 kg/cm2max. operating pressure: 3 kg/cm2safety valve set pressure: 10 kg/cm2thermal efficiency: 90% +/- 2%power supply: ac, 3 ph, 415v, 50 hz, 4-wire systemb) mountings & fittings detailsmain steam stop valve- 25 mm nb-1 no.safety valve - 15 mm nb-2 nos.shell blow down valve 25 mm nb-1 no.air vent valve - 15 mm nb-1 no.isolation valve along with pressure guage - 1 no.c) feed water pump and tank. type: reciprocating, piston typepump capacity: 100 lphhead: 115 mwcoutlet steam condition: dry, saturatedd) burnerfuel: lpgtype: monoblockfuel consumption: 5.5 kg/hre) m.s. straight chimney, with ladder, base plate, nuts & bolts, template for foundation, foundation bolts, including painted with heat resistant aluminium paint and foundation etc., as required.diameter: 150 mmheight - 6 m (vertical) + 3m (horizontal connecting pipe from boiler to chimney)sheet thickness - 5 mmf) feed water tankpvc water tank capacity- 500 litretank having valves, strainer, drain pipe & level indicator, with ms structure (height-2m)tank thickness - 3 mmf) pressure reducing stationnon-ibr prs - steam pressure reducing station for upstream pressure of 10 kg/cm2, downstream pressure of upto 3 kg/cm2, complete with valves, safety valve, pressure gauges, steam trap assembly, prv, inter-connecting pipeline etc.g) softner plant along with interconnecting pipe and its accessories.capacity: 1.5 m3/hroutlet design hardness: < 5 ppmvessel moc: frppiping moc: upvcoperating pressure: 3.5 kg/cm2capacity of brine tank: 80 litremoc of brine tank: lldpeh) softener feed water pump with electrical starterflow rate - 1 m3/hrhead: 35 meteroperating voltage: 3 phase, 415 volts(make: thermax/ thermodye /southern boilers)supplying, laying/ fixing, testing and commissioning of following nominal sizes of seamless c-class heavy duty ms non - ibr steam piping plumbing inside the building (with necessary clamps, vibration isolators and fittings including valves, and flexible steam pipe for connecting to steam vessel etc.) duly insulated with fire retardant quality expanded thermal mineral wool and finally applying 0.63mm aluminium sheet cladding complete, repairing of damage to building etc. as per specifications and as required complete in all respect.40 mm (32 mm thick insulation)25 mm (19 mm thick insulation)20 mm (19 mm thick insulation)supplying, installation, testing and commissioning of tiltable steam operated double jacket rice vessel with lid of 25 kg capacity etc., as required.it is made out of a 14 swg 304-grade ss sheet with a bottom perforation plate and funnel at the bottom drain kanji. the lid is made out of 20 swg sheets. this unit has a drainage valve, ss handle, and ss stand made out of 14 swg 304 grade ss sheet with bottom.supplying, installation, testing and commissioning of tiltable steam operated double jacket dhall steam vessel with lid of 75 litre capacity etc., as required.it is made out of a 14swg 304-grade ss sheet with a bottom perforation plate and funnel at the bottom drain kanji. the lid is made out of 16 swg sheets. this unit has a drainage valve, ss handle, and ss stand made out of 14 swg 304 grade ss sheet with bottom.supplying, installation, testing and commissioning of tiltable steam operated double jacket milk steam vessel with lid - 100 litre capacity etc., as required.it is made out of a 14swg 304-grade ss sheet with a bottom perforation plate and funnel at the

Kettle Element Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others