Latest khadi Tenders | Government khadi Tenders

CTN :38984535

20 Feb, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : short refit of in ship> - ins astradharini sr-25 - hull00001dockingdocking (mt-10140)(mt-10140)(a) the refitting authority is to take all actions to ensure that the docking is carried out in accordance with the latest issue of the docking plan for the planned version of the docking which is specific to the vessel (and not generic to a class of vessels) and for a particular docking procedure. the refitting authorities are to forward docking plan, along with the check off list promulgated vide nc/policy/h-134/refit dated 11 may 18, to ihq(n)/dna through command hqs for approval. the docking facility is to be prepared in accordance with the requirements of the docking plan and docking procedures. (b) a dock master is to be appointed by the refitting authority for each docking evolution and the same is to the intimated to commanding officer/ master of the vessel as per format of no str 01/11, preferably 72 hours in advance of the commencement of docking evolution. (c) refitting authority (dock master and planner) are to review the calculation submitted by the ship. the docking/ undocking conferences are to be organised by the refitting authority (dock master and refit planner) to review readiness for docking/ undocking operations, at least 24 hours prior docking/ undocking. further, in order to understand criticality of each operation, and demarcation of responsibilities of the stakeholders, the dock master is to conduct a centralised briefing for all the stakeholders 24 hours prior every docking/ undocking operation., 00002u/w hullexternal underwater area (mt-11023)(a) remove marine fouling from entire uw external hull area using wooden scrapper or hydro jetting with maximum pressure not exceeding 3000 psi., 00002u/w hullexternal underwater area (mt-11023)(b) scrape and clean under water and boot topping area (including wind and water areas) to remove all loose paint film, rust etc. paint scheme repair/ renewal is to be undertaken iaw ihq, mod policy letter nc/0528/llps dated 20 jul 11 and ncd 1491 issue 1 of may 11 and surface preparation to be undertaken iaw with no 53/16 (note :- wind and water areas to be considered up to 500mm above boot top.), 00002u/w hullexternal underwater area (mt-11023)(c) carry out survey of external uw hull structure in accordance with no 01/15 and ihq mod (n)/ dna letter nc/7631 dated 01 nov 22 as follows :-note:- 100% visual survey of complete underwater hull and boot top including wind and water areas i.e. area up to 500mm above boot top area., 00002u/w hullexternal underwater area (mt-11023)(d) excessive areas of breakdown of abrasive anticorrosive paints to be blasted and recoated with full paint scheme. paint scheme on full underwater hull and boot top including wind and water areas i.e. area up to 500mm above boot top area is to be restored. surface preparation to be undertaken iaw with no 53/16. paint scheme repair/ repairs is to be undertaken iaw ihq, mod (n) policy letter nc/0528/llps dated 20 jul 11 and ncd 1481 issue 3 of may 11., 00002u/w hullexternal underwater area (mt-11023)(e) application of one coat of a/f paint on under water hull and boot top area to be carried out post adequate surface preparation based on the findings of joint inspection with oem. paint touch up/ maintenance painting to be carried out iaw no 53/16/ policies/ ncd in vogue., 00002u/w hullexternal underwater area (mt-11023)(f) paint scheme of all technical windows above water line to be restored iaw no 53/16. test and trials of all renewed plates are to be carried out iaw para 42 and 43 of no 01/15., 00003u/w hull (as per no 53/16)preservation/ paintingcarry out assesment based painting of external underwater hull including boot top area wherever applicable (post joint uw inspection). carry out fresh water hosing down before starting of painting. the u/w hull painting includes painting of u/w fittings, gratings and other u/w appendages as well.note:(i) warranty of paint scheme should be confirmed from

corporations/Associations/Others

CTN :39218259

12 Feb, 2025 10.99 Lacs

Secunderabad - Telangana

Tender For dismantling of old damaged toilets in the ground floor and repairs to toilets in ground and first floor ( 7 seats) and providing impervious coat and repairs to pump and painting and supply of office chairs and other minor repairs to malkajgiri circle office building in malkajgiri circle -28 , secunderabad zone , ghmc

corporations/Associations/Others

CTN :39218098

14 Feb, 2025 NA

Surat - Gujarat

Tender For dredging of existing khadi & kachcha gutter with pocklane machine l&t pc 200 or equivalent capacity and jcb 3d/4cx/l&t/beml/hm or equivalent capacity and shifting the dredging material with tractor or dumper on hourly basis of :- work no.09: sub zone-01 & other area of south zone- a (udhana), surat. work no.10: sub zone-02 & other area of south zone- a (udhana), surat. work no.11: sub zone-03 & other area of south zone- a (udhana), surat. work no.12: sub zone-04 & other area of south zone- a (udhana), surat.

Central Government/Public Sector

CTN :39205659

25 Feb, 2025 NA

Daman - Gujarat

Tender For supply of antiflash hood for fire fighter , fire coat medium for fire fighter suit , fire coat small for fire fighter suit , trouser small for fire fighter suit , trouser medium for fire fighter , gloves for fire fighter , cement rapid hardening , flax canvas variety no one , antiflash gloves , antiflash hood

Central Government/Public Sector

CTN :39224164

26 Feb, 2025 NA

Jamnagar - Gujarat

Tender For supply of thinner no. 1 yta 800 , black paint ec75 , top coat high durability polyurethane finish white , inernational grey interdeck289 non slip deck paint

Central Government / Public Sector

CTN :39049460

19 Feb, 2025 35.00 Lacs

Panipat - Haryana

Tender For corrigendum : supply of spectacle blinds, spacers for cdw and pp units - supply of spectacle blinds, spacers (cpmsl cat 1.158 as per jan 2025), sbld, cs (nace), b16.48,ff, for rf flg,b16.5, cl.150, a105, sbld, cs (nace), b16.48,ff, for rf flg,b16.5, cl.150, a105, sbld, cs (nace), b16.48,ff, for rf flg,b16.5, cl.150, a105, sbld, cs, b16.48,ff, for rf flg,b16.5, cl.300, a105, sbld, cs, b16.48,ff, for rf flg,b16.5, cl.300, a105, sbld, cs, b16.48,ff, for rf flg,b16.5, cl.300, a105, sbld, cs, b16.48,ff, for rf flg,b16.5, cl.300, a105, sbld, cs (nace), b16.48,ff, for rf flg,b16.5, cl.300, a105, sbld, cs, b16.48,ff, for rf flg,b16.5, cl.600, a105, sbld, cs, b16.48,ff, for rf flg,b16.5, cl.600, a105, sbld, cs (nace), b16.48,ff, for rf flg,b16.5, cl.600, a105, sbld, cs (nace), b16.48,ff, for rf flg,b16.5, cl.600, a105, sbld, cs (nace), b16.48,ff, for rf flg,b16.5, cl.600, a105, sbld, ltcs, b16.48,ff, for rf flg,b16.5, cl.150, a350 gr.lf2 cl.1, sbld, ltcs, b16.48,ff, for rf flg,b16.5, cl.300, a350 gr.lf2 cl.1, sbld, ltcs, b16.48,ff, for rf flg,b16.5, cl.600, a350 gr.lf2 cl.1, sbld, ltcs, b16.48,ff, for rf flg,b16.5, cl.900, a350 gr.lf2 cl.1, sbld, ltcs, b16.48,ff, for rf flg,b16.5, cl.1500, a350 gr.lf2 cl.1, sbld, ss, b16.48,ff, for rf flg,b16.5, cl.300, a182 gr.f304, sbld, ss,large groove type, b16.48,lg/mfg s, for lt flg,b16.5, cl.600, a182 gr.f304, sbld, ss, b16.48, for rf flgs,b16.5, cl.900, astm a182 gr. f304, sbld, ss, nace, b16.48,ff, for rf flg,b16.5, cl.300, a182 gr.f304l, sbld, cs (ibr), b16.48,ff, for rf flgs,b16.5, cl.150, a105, sbld, cs (nace+ibr), b16.48,ff, for rf flgs,b16.5, cl.150, a516 gr.70, sbld, cs (ibr), b16.48,ff, for rf flg,b16.5, cl.300, a105, sbld, cs (ibr), b16.48,ff, for rf flg,b16.5, cl.300, a105, sbld, cs (nace+ibr), b16.48,ff, for rf flg,b16.5, cl.300, a516 gr 70, sbld, cs (ibr), b16.48,ff, for rf flg,b16.5, cl.600, a105, sbld, cs (ibr), b16.48,ff, for rf flg,b16.5, cl.900, a105, sbld, cs (ibr), b16.48,ff, for rf flg,b16.5, cl.900, a105, sbld,ss, b16.48, for rf flgs, b16.5, cl.150, a182 gr.f304, sbld,ss, b16.48, for rf flgs, b16.5, cl.1500, a182 gr.f304, sbld,ss, b16.48, for rf flgs,b16.5, cl.300, a182 gr.f316, sbld, cs (h2 service), b16.48, for rtj flgs,b16.5, cl.900, a105, sbld, cs (h2 service), b16.48, for rtj flgs,b16.5, cl.1500, a105, sbld, cs (h2 service), b16.48, for rtj flgs,b16.5, cl.1500, a105, sbld, cs (h2+nace), b16.48, for rtj flgs,b16.5, cl.1500, a105, sbld, cs, b16.48, for rtj flgs,b16.5, cl.2500, a105, sbld, cs (h2+nace), b16.48, for rtj flgs,b16.5, cl.2500, a105, sbld, cs,(nace), b16.48, for rtj flgs,b16.5, cl.2500, a105, sbld, cs,(nace), b16.48, for rtj flgs,b16.5, cl.2500, a105, sbld, ltcs, b16.48, for rtj flgs,b16.5, cl.900, a350 gr.lf2,cl1, sbld, cs (h2 + ibr), b16.48, for rtj flgs,b16.5, cl.1500, a105, spacer & blind, cs, eil,ff, for ff flg,awwa c207 cl.d, cl.150, a 516 gr.70, spacer & blind, cs (nace), b16.48/eil,ff, for rf flg,b16.47,sr.b, cl.150, a 516,gr 70, spacer & blind, cs (nace), b16.48/eil,ff, for rf flg,b16.47,sr.b, cl.150, a 516,gr 70, spacer&blind,cs,int.epoxy coat, b16.48,ff, for rf flg,b16.5, cl.150, a105, spacer&blind,cs,int.epoxy coat, b16.48,ff, for rf flg,b16.5, cl.150, a105, spacer & blind, cs (nace), b16.48,ff, for rf flg,b16.5, cl.150, a105, spacer & blind,cs(in+ex epoxy), b16.48,ff, for rf flg,b16.5, cl.150, a105, spacer & blind,cs(in+ex epoxy), b16.48,ff, for rf flg,b16.5, cl.150, a105, spacer & blind,cs(in+ex epoxy), b16.48,ff, for rf flg,b16.5, cl.150, a105, spacer & blind, cs (nace), b16.48,ff, for rf flg,b16.47,sr.b, cl.300, a105, spacer & blind, ltcs, eil ref,ff, for rf flg,b16.47,sr.b, cl.150, a350 gr.lf2 cl.1, spacer & blind, ltcs, eil ref,ff, for rf flg,b16.47,sr.b, cl.300, a516gr.70(normalised, spacer & blind, ss(h2+nace), b16.48, for rtj flgs,b16.5, cl.2500, a182 gr.f321, spacer & blind, ss(h2+nace), b16.48, for rtj flgs,b16.5, cl.2500, a182 gr.f321, paddle,spacer & blind,ss, b16.48, for rf f

State Government

CTN :39228804

11 Feb, 2025 38.63 Lacs

Shimla - Himachal Pradesh

Tender For providing and laying giii primer coat tach coat 25mm thick bituminous concrete in km 15/000 to 18/000

State Government

CTN :39228805

11 Feb, 2025 24.70 Lacs

Shimla - Himachal Pradesh

Tender For p/l g iii primer coat tack coat 25mm thick bituminous concrete in km 24/000 to 26/000

State Government

CTN :39228806

11 Feb, 2025 51.30 Lacs

Shimla - Himachal Pradesh

Tender For providing and laying g iii primer coat tach coat 25mm thick bituminous concrete in km 0/000 to 3/910

CTN :39179953

28 Feb, 2025 2.00 Crore

Rajouri - Jammu And Kashmir

Tender For providing, laying and compaction 30 mm thick (compacted) bituminous concrete and correction work with bm of 50 mm thick (compacted) including application of tack coat along with road marking with thermoplastic paint as per mort&h specifications for resurfacing works in between km 18.934 to km 53.887 (13.486 km cl-9) on rajouri-kandi-budhal road during fy 2025-26 in 110 rcc/31 brtf project sampark in j&k (ut): tender no. ce (p) spk/22/2024-25

Khadi Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors