Latest knuckle thrower Tenders | Government knuckle thrower Tenders

Central Government/Public Sector

CTN :44557870

30 Mar, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap and unserviceable condemned mix m.s. coach cutting items & various types of similar items such as , body side door m.s., p.o.h. coaches realised corroded pieces,air brake,clamp,pipe pin,m.s. door of battery box ,m.s.ventilation door,foot plate,ice box,m.s. spring,m.s. angle,and m.s. lader with rubber coating,coach cuttings, coach doors , seat frames , bearth/seat frames, light head stock cuttings, train lighting fittings,, side lamps lamp hand signal, fittings, tail lamp fittings, cft/tl light fittings, ictp/ icfp empty swich boxes tail lamps, tube light fittings, tube light jali, fan blades, fan jali, fan guards fan ribs, fan rings, empty power pannels, signal platform, destination board, valley board, letter board,ms signal base, loc, inercooler, nut bolts and other hardwares, m s furniture.m s wheel stand,window grill, ms measuring cans, tins, racks, break pipes, silencer of tower wagon, dust bin, ms pipe and cut pcs. of ms pipes, rods, ms bars released from broken constructin, compressor spring, wire /coil springs, ms rope wire, pcs. of brake beam pipes, stands, m s ferrous light junk kachra related scrap i.e ms angles, chanels, flats pcs. of cable racks/laders ms brackets , dust bin stand , tin fuse box, fire extinguisher, empty glow sign boards, empty electrical pannel, ms stand, oven, earthing patti, empty cable tray, fly catcher, galvanized patra / sheet and their cut offs,cut pieces of ms cupboards,rack etc , plain/ corrugated / toughened sheets and its cut pcs. such as strips, patties, patties, patra, rings, coils, boxes, ms brake control cover, patra, angle, small springs, pins, wire , electric point , shunt signal unit and post. signal ladder , location box, earth electrode , signal post and base , signal unit, point roddings , junction route indicator and cut pieces in mijscellaneous, coil, collapsible doors and shutters and their parts/cut offs, grills , channel grills, compound /bridge jali with or without frame, ms fencing and their parts, fencing patties, angle pcs., frames,wire mesh, g.i./ms pipes and tubes , tubes and their cut pcs, damaged gi/ ms pipes/ rods/tubes and their pcs. , ms/galvanised boxes, junction box, switch boxes, empty convertor, payary (steps), filters, rings, nut bolts, u clips, pipe pin, gate m/c dismentled, liquid container, damaged video boxes and their cut offs, crt cabinet, location boxes , jumper, jumper box,ground connections , basket steel, water cane/ material carring trolley,steel baskets, containers, trays, frames, stretchers, nets/ jali , released ground connection, halogen, panto pans, compressor spares, dust guard, air filters and filter covers, ms/gi duct and its parts,insulating armature of signal cable, hand lamps, side lamps, signal lamps petromax, hs lamp, clamps, signal post,signal platform, signal base, ms/ gi wire/ coil, funnels, wall protectors, boxes, iron bar pcs released from broken construction , desmantelled weighing machines parts/ covers etc. ms pipe with or without ci attachment, bins, plates, rings, spares/ parts /body of weighing machine , platform weighing machine and its parts, pressure switches and other switches , signal parts, location boxes,panel board,fuse box,mdb board,pedestial for lc gate and their cut parts and other ferrous miscellaneous scrap items with or without minor nf/ss/ wooden / rubber / rexine attachments of sorts and sizes, broken and damaged, u/s for rly. use, excluding items: rail and rail pcs., axles and axle pcs., wheel tyre and pcs., cam shafts, helical springs, bolster springs, buffer plungers, face plates, axle box housings/ casings, brake beams, fish plates, screw couplings/draw bar hooks, break beams, reservoir tanks, st sleepers and other various types of similar ms items etc. note: 1. hammering/ pressing/ cutting is permitted for easy loading only, 2. if found any non-ferrous item will not be delivered (qty approx

Central Government/Public Sector

CTN :44558964

25 Mar, 2026 NA

Kota - Rajasthan

Tender For auction sale of depot ferrous scrap - 98050126 scrap ferrous material consisting of various type of nut, bolt, rivets,pcs of angle, channel, m.s. bracket, draft gear spring washer,m.s. liners,piston, door hinge, door hinge foot, small cut pcs of tie bar, beater, clamp, pully side bearer housing, brake wear plate,side bearer housing top and bottom, knuckle pin, knuckle thrower, dog spike, g.i. ohe fitting, bk hanger lever, fish bolt, parts of ctrb bearing, liner, small p.way fittings, bk shoe key, s/pin, pu pad, axle box cover, m.s. pins, s/plate, pcs of pipe, pcs of huck bolt fresh cutting, push rod, cbc uncoupling rod, cbc lock and cbc components, safety loop, bk shoe head, released valve, cut pcs of m s sheet, plates, buckles, ohe fitting, pcs of ms rounds, equalizing lever, bridle bar, shackle stone, shackle, stricker casting wear plate, yoke pin, side bearer liner plate, hand brake wheel, suspension socker, g.i. nut bolt, tension device, main pull rod, cbc uncoupling rod, yoke pin, c.c. pad plate, m.s. round, bk shoe head, bk beam plate, reservoir tank patti, door catch, door check spring, annual repair supporting bracket and other small wagon components .and other ferrous items if any.

Central Government/Public Sector

CTN :44585694

09 Apr, 2026 NA

Latehar - Jharkhand

Tender For supply of knuckle thrower for up graded high tensile centre buffer coupler of boxn hl to rdso drg. no.sk - 62724, item no 9, alt. no.31. spec. no. wd-70-bd-10 rev.04.

Central Government / Public Sector

CTN :44588457

16 Apr, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of knuckle thrower for high tensile tight lock

Central Government / Public Sector

CTN :44530947

26 Mar, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 031326030122 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, boxnr , bobrnel , boxncr ,available on rails. 1) scr boxnr 25099617922 ,2) er boxnr 25029698656,3) er boxnr 25029660189, 4) er bobrnel 72029682239, 5) ser boxncr 10079561494. location road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.sab 9.yoke pin support (1st plate),10. safety plate with anchor plate(2ndplate11.yoke support plate(3rdplate),12.yoke pin, 13)draft gear followers,14.knuckle pin.15.knuckle thrower.16.back stopper.17.bronzebuishesds8no:0999603122. dt:.17.03.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 54.813 .mt (m.s -38.069, ss-16.744) sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :44530949

26 Mar, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 031326030121 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, bobrnr m2, boxnr , bcn m1 .available on rails. 1) ser box nr m2 25079660030 ,2) ser box nr 25079662942,3) special repair bcn m1 30069160018,4) er box nr 10029661403 ,5) scr box nr 25099636688. location road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8. distributor valve,, 9 .sab 10.yoke pin support (1st plate),11. safety plate with anchor plate (2n d plate 12. yoke support plate(3rdplate),14.yoke pin,15)draft gear followers,16.knuckle pin.17.knuckle thrower.18.back stopper. s8no:0999603121. dt:.17.03.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 52.909 .mt (m.s -37.043, ss-15.866) sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :44530951

26 Mar, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 031326030120 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, bcn m1 boxnr , bobrn m1 .available on rails. 1) er bcn m1 30029060266,2) scr bcn m1 30099082380 ,3) er bcn m1 30028860355 ,4) ser box nr 25079662164 ,5) er bobrn m1 72029681010 . location : road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8. casnub bogies with all fittings, 9. distributor valve,, 10 .sab 11.yoke pin support (1st plate),12. safety plate with anchor plate (2n d plate 13. yoke support plate(3rdplate),14.cut of angle cock,15.yoke pin,16)draft gear followers,17.knuckle pin.18.knuckle thrower.19.back stopper.20.bcn flap,21.bronze buishes ds8no:0999603120. dt:.17.03.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 64.728 .mt (m.s -60.542, ss-4.186) sold by number basis only.05 nos. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :44530953

26 Mar, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 031326030119 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, boxnr m2 , boxn m1 , bobrn m1 .available on rails. 1) ser boxnr m2 25079662218 , 2) nr boxn m1 10039660830, 3 ) ser boxn m1 10079662313, 4) er boxnr m2 25029660042, 5) nr boxn m1 10039660014. location road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8. casnub bogies with all fittings, 9. distributor valve,, 10 . sab 11.yoke pin support (1st plate),12. safety plate with anchor plate (2n d plate 13. yoke support plate(3rdplate),14.cut of angle cock,15.yoke pin,16)draft gear followers,17.knuckle pin.18.knuckle thrower.19.back stopper. ds8no:0999603119. dt:.17.03.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 47.063 .mt (m.s -40.447 , ss-6.616) sold by number basis only. 05 nos .delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :44530955

26 Mar, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - 031326010100 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons,bcn m1, boxn m1 , available on rails. 1) cr bcn m1 30019060474, 2) scr boxn m1 10099660337 ,3) ser boxn m1 10079660333 ,4) ser boxn m1 10079667271 ,5) nr bcn m1 30039018288 . location road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. wheel set with ctrb, 8. casnub bogies with all fittings, , 9. yoke pin support (1st plate),10. safety plate with anchor plate (2n d plate 11. yoke support plate(3rdplate), 12., yoke pin, 13) draft gear followers,14. knuckle pin 15.knuckle thrower.16. bcn swing. ds8 no:0999603100. dt:24.01.26. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 39.124 .mt sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government/Public Sector

CTN :44511764

26 Mar, 2026 NA

Rajkot - Gujarat

Tender For corrigendum : supply of knuckle thrower

Knuckle Thrower Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors