Latest labor work Tenders | Government labor work Tenders

corporations/Associations/Others

CTN :39864470

04 Apr, 2025 NA

Surat - Gujarat

Tender For the work of scraping various roads, footpaths, water table in the subzone-2 area included in southzone-a (udhana) with labor work including hydraulic tractor.

Central Government/Public Sector

CTN :39858767

25 Apr, 2025 NA

Kanchipuram - Tamil Nadu

Tender For supply of power control and monitoring systems pcms for deepwater submersible 6000m matsya - finalizing the general arrangement ga of the pcms inside the personnel sphere ordering of components for 2 numbers of ps pcms 3 nos of pde and 3 nos ide as per the approved design and bom , completing of 3d modelling of the pcms in ps and ps pt completing modularity check of ip rated enclosure in ps pt completing ait of ides and pdes , completing fat of pdes 3 nos and ides bom in niot as per bill of material , completing fat and installation and commissioning of pcms in ps pt in niot as per bill of material , completing fat of pcms in 6000m ps in niot after integration with human submersible and testing , all risk insurance till completion of installation and commissioning and handing over to niot after integration with human submersible and testing , packing and forwarding charges , gst as per hsn code

CTN :39854175

15 Apr, 2025 26.97 Lacs

Kota - Rajasthan

Tender For tn-11166 supply of m/s dcips make spares for clinker grinder, jet pump and feed gate for bottom ash hopper and wetting head system for wet ash disposal from esp hoppers unit 5 ash handing plant of kstps, kota. - spares for excen crusher (clinker grinder) as per drg. no. 92-p-07-2b-582 of ahp stage-iii, cam group structure, material-durite, 500 bhn (part no. 1) 1 set = 8 nos., wear plate front (part no. 3) 1 set = 3 nos., wear plate back (part no. 4) 1 set = 3 nos., wear plate side (part no. 5) 1 set = 4 nos. (2 rh & 2 lh), shaft (shaft with shaft structure fitted with cam group structure, shaft sleeve, cam bolt etc.) material en24 part no. 2 - 1 set = 1 no., bearing housing for above clinker grinder (part no. 7), packing gland followers (part no. 12), packing gland (part no. 9) 1 set=2 nos., slinger (part no. 14), lantern ring material al. bronze(part no. 10), shaft sleeve ss410 (part no. 15), special type self locking square head bolt (ss410) with nut & lock nut with washer for segment plates, jet pulsion pump as per drg. no. 92-p-07-2b-591, jet pulsion pump complete assembly (1 no.) assembly consists of body combining tube, nozzle with insert, adapter, aligning ring flange clamp etc. but without tail pipe, spares for jet pulsion pump as per drg. no. 92-p-07-2b-591, combining tube, material -durite 500 bhn (throat cum tail pipe) (part no. 1), nozzle tip (ss-410) with nozzle insert (material ceremic) (part no. 2 & 13), nozzle adapter (part no. 3), flange clamp half , material ductile iron (n-8)(part no. 16), 9 flange clamp half (part no. 18), aligning ring (part no. 10), spares for ba hopper feed gate as per drg. no. 92p07-1b-572, renewable seat strip (part no. 2), side liner (part no. 3), bottom liner (part no. 4), roller (part no. 17), bush for roller (part no. 25), adjustable seating wedge (part no. 13), fly ash intake valve drg. no. 9207-2b-22, fly ash intake valve complete as per drg. no. 9207-2b-22, fly ash intake valve spares parts: -, hopper inlet body spares for faiv (part no. 1) for fly ash intake valve, body intake valve spares for for fly ash intake valve (part no. 2), nuva alloy 8 inch tee for ash intake valve (part no. 3), valve disc spares for for fly ash intake valve (part no. 4), removable seat spares for fly ash intake valve (part no. 5), shaft spares for fly ash intake valve (part no. 6), spring spares for fly ash intake valve (part no. 7), roll pin spares for fly ash intake valve (part no. 8), air cylinder 2.5" borex5" stroke spares for fly ash intake valve (part no. 9), yoke spares for fly ash intake valve (part no. 13), lever spares for fly ash intake valve (part no. 14), lever spares for fly ash intake valve (part no. 15), seal kit for air cylinder 2.5 bore x 5 stroke of fly ash intake valve, air intake valve drg. no. 9207-2a-11, air intake valve complete as per drg. no. 9207-2a-11, air intake valve spares parts: -, body spares for air intake valve (part no. 1), valve disc, ss- 316 spares for air intake valve (part no. 2), compression spring, steel-en 42b spares for air intake valve (part no. 3), valve stem, ss-410/416 spares for air intake valve (part no. 4), totally enclosed rotary slide gate drg. no. 9207-2a-40, totally enclosed rotary slide gate valve complete as per drg. no. 9207-2a-40, totally enclosed rotary slide gate (tersg) spares parts: -, bode spares for totally enclosed rotary slide gate valve (part no. 1), slide spares for totally enclosed rotary slide gate valve (part no. 2), shaft, en-8 spares for totally enclosed rotary slide gate valve (part no. 3), bush, bronze spares for totally enclosed rotary slide gate valve (part no. 4), seal strip, nitrile rubber spares for totally enclosed rotary slide gate valve (part no. 5), air cylinder spares for totally enclosed rotary slide gate valve (part no. 10), wetting unit head assembly spares parts:, body inlet piece, alloy ci spares for wetting unit head assembly (part no. 1), water chamber, fg-220, is-210 spares for wetting unit head a

corporations/Associations/Others

CTN :39839564

07 Apr, 2025 NA

Rajandgaon - Chhattisgarh

Tender For tender for hand pump repair labor work, cleaning work of stones stuck in the bore, pipes, pumps etc, installed in tanks, valve, spindle rod, chuck nut, soft, repair work on gate valves etc, well cleaning work, purchase of upvc pipe, cpvc pipe and fitting material at various locations

CTN :39832798

09 Apr, 2025 6.13 Lacs

Multi City - Karnataka

Tender For supply of materials for the constrcution of sanjivini shed in kallenahalli gp, ajjampura taluk, chikkamagaluru work under mgnregs scheme - labour charges for handing errection of rcc rings etc. at 5%(kall), transportation charges of materials beyond 5 km at 10%(kall), fabrication charges.(kall), cost of 6.5mm m.s. coil(kall), bib cock 20mm nominal bore(kall), polythylene pipes high density 32mm external dia(kall), add 5% for fittings and wastage charges(kall), add cement sand and grit 1% on material(kall), pvc pipe of 4kg/cum,75 mm(kall), pvc pipe of 6kg/cum,63 mm(kall), pvc pipe of 10kg/cum,110 mm(kall), handling loading and unloading 3% on material(kall), labour charges for lifting and placing in position and making connection at 7% on material(kall), polyenthylene water storage tank of specified capacity l(kall), licenced plumber with tools(kall), lead or pvc connection pipe 32mm dia (for wash basin)(kall), c.i. / m.s. brackets for flushing cistern(kall), brass stop cock(kall), cp brass waste 32 mm of standard pattern(kall), cp brass chain with plug(kall), copper plated brass piller tap 15mm(kall), white vitreous china clay flat back wash basin size 550x400mm(kall), add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material(kall), s or p trap 100mm(kall), indian type water closet of size 580 mm of specified make with footrests(kall), add white cement for pointing at 2% on material(kall), border tiles 30 x 10 cms(kall), glazed tiles 300x450(kall), white cement(kall), ceramic tiles 30 x 30 cms(kall), vitrified tiles 600x600 mm(kall), add brush, putty, sand paper at 3% on cost of paint(kall), enamel paint(kall), mason class ii (with tools)(kall), add brush, putty, sand paper at 2% on cost of paint(kall), water proofing cement paint(kall), add brush, putty at 5% on cost of distemper primer(kall), distemper primer(kall), add brush, putty, glue at 5% on cost of paint(kall), whitening(kall), dry distemper(kall), lime(kall), add providing and removing scaffolding at 3% on labour(kall), painter class i(kall), add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint(kall), ready mix primer paint (ready mix red lead paint)(kall), add(kall), welder grade i(kall), fitter class i(kall), z section(kall), reeded glass 2 mm thick(kall), tw beading for fixing glass(kall), stays(kall), hinges 5inch heavy duty(kall), handles(kall), ms clamps(kall), mullion section(kall), t section(kall), honnewood planks for panels 20 mm thick(kall), honne wood(kall), unit cost as per the specification(kall), hom of machinaries for planing(kall), add cutting and other wastage 5%(kall), mathi/nandi wood planks for panels 25 mm thick(kall), binding wire(kall), tmt bars fe 500(kall), casurina poles 75 - 100 mm dia(kall), mason class i (with tools)(kall), solid concrete block (40x15x20 cms)- 5.00 n/sqmm(kall), add handling , loading and unloading at 1% on material(kall), burnt bricks class 35 (non modular)(kall), add watering charges at 1 % on labour(kall), add handling , loading and unloading at 2% on material(kall), casurina poles 100 - 150 mm(kall), silver oak or equivalent planks 38 mm thick(kall), jungle wood runners and planks(kall), mixer (concrete small used in culvert)(kall), boulders(kall), bond stone 20 x 20 x 45 cm(kall), size stone 20 x 20 x 25 cms(kall), hom of vibrator 0.71 days(kall), plasticizer / super plasticizer(kall), formwork, centering & scaffolding for columns & piers(kall), add watering charges at 1 % on material(kall), mixer (concrete) - 1 cum capacity(kall), portland cement(kall), coarse sand (zone iii)(kall), broken stone aggregate 12 mm to 10 mm size(kall), broken stone aggregate 20 mm size(kall), broken stone aggregate 40 mm size(kall)

corporations/Associations/Others

CTN :39825659

29 Mar, 2025 NA

Surat - Gujarat

Tender For labor work for repair of valve chamber of water pipe in pal, adajan, palanpore, bhatha, bhatpore, bhensan, ichapore and entire area of rander zone in west zone (rander).

corporations/Associations/Others

CTN :39825660

29 Mar, 2025 NA

Surat - Gujarat

Tender For labor work for repair of valve chamber of water pipe in rander, jahangirabad, jahangirpura, variav, okha, vankala, chichi and entire area of rander zone in west zone (rander).

State Government

CTN :39833120

16 Apr, 2025 2.00 Lacs

Junagadh - Gujarat

Tender For e tender for labor work for febrication work for store of city division junagadh. ( 2nd attempt )

CTN :39690729

28 Mar, 2025 7.12 Lacs

Multi City - Karnataka

Tender For corrigendum : nrlm-shed-yarehanchinal - bnklnr labour charges for handing errection of rcc rings etc 5, bnklnr transportation charges of materials beyond 5 km 10, bnklnr fabrication charges, bnklnr cost of 6 5mm m s coil, bnklnr bib cock 20mm nominal bore, bnklnr polythylene pipes high density 32mm external dia, bnklnr add 5 for fittings and wastage charges, bnklnr add cement sand and grit 1 on material, bnklnr pvc pipe of 4kg cum 75 mm, bnklnr pvc pipe of 6kg cum 63 mm, bnklnr pvc pipe of 10kg cum 110 mm, bnklnr handling loading and unloading 3 on material, bnklnr labour charges for lifting and placing in position and making connection at 7 on material, bnklnr polyenthylene water storage tank of specified capacity l, bnklnr licenced plumber with tools, bnklnr lead or pvc connection pipe 32mm dia for wash basin, bnklnr c i m s brackets for flushing cistern, bnklnr brass stop cock, bnklnr cp brass waste 32 mm of standard pattern, bnklnr cp brass chain with plug, bnklnr copper plated brass piller tap 15mm, bnklnr white vitreous china clay flat back wash basin size 550x400mm, bnklnr add white lead paint gasket cement sand for making good the wall and floor at 2 on material, bnklnr 100mm s or p trap, bnklnr indian type water closet of size 580 mm of specified make with footrests, bnklnr add white cement for pointing at 2 on material, bnklnr border tiles 30 x 10 cms, bnklnr glazed tiles 300x450, bnklnr white cement, bnklnr ceramic tiles 30 x 30 cms, bnklnr vitrified tiles 600x600 mm, bnklnr add brush putty sand paper at 3 on cost of paint, bnklnr enamel paint, bnklnr mason class ii with tools, bnklnr add brush putty sand paper at 2 on cost of paint, bnklnr water proofing cement paint, bnklnr add brush putty at 5 on cost of distemper primer, bnklnr distemper primer, bnklnr add brush putty glue at 5 on cost of paint, bnklnr whitening, bnklnr dry distemper, bnklnr lime, bnklnr add providing and removing scaffolding at 3 on labour, bnklnr painter class i, bnklnr add wire brush fine steel wool putty sand paper at 3 on cost of paint, bnklnr ready mix primer paint ready mix red lead paint, bnklnr add, bnklnr welder grade i, bnklnr fitter class i, bnklnr z section, bnklnr reeded glass 2 mm thick, bnklnr tw beading for fixing glass, bnklnr stays, bnklnr hinges 5 heavy duty, bnklnr handles, bnklnr ms clamps, bnklnr mullion section, bnklnr t section, bnklnr honnewood planks for panels 20 mm thick, bnklnr honne wood, bnklnr unit cost as per the specification, bnklnr hom of machinaries for planing, bnklnr add cutting and other wastage 5, bnklnr mathi nandi wood planks for panels 25 mm thick, bnklnr binding wire, bnklnr tmt bars fe 500, bnklnr casurina poles 75 100 mm dia, bnklnr mason class i with tools, bnklnr solid concrete block 40x15x20 cms 5 00 n sqmm, bnklnr add handling , loading and unloading at 1 on material, bnklnr burnt bricks class 35 non modular, bnklnr add watering charges at 1 on labour, bnklnr add sundries charges at 1 on labour, bnklnr add sundries charges at 2 on material, bnklnr add handling loading and unloading at 2 on material, bnklnr casurina poles 100 150 mm, bnklnr silver oak or equivalent planks 38 mm thick, bnklnr jungle wood runners and planks, bnklnr mixer concrete small used in culvert, bnklnr boulders, bnklnr bond stone 20 x 20 x 45 cm, bnklnr size stone 20 x 20 x 25 cms, bnklnr hom of vibrator 0 71 days, bnklnr plasticizer super plasticizer, bnklnr formwork centering & scaffolding for columns & piers, bnklnr mixer concrete 1 cum capacity, bnklnr portland cement, bnklnr broken stone aggregate 12 mm to 10 mm size, bnklnr broken stone aggregate 20 mm size, bnklnr broken stone aggregate 40 mm size, bnklnr over head & other miscellaneous charges, bnklnr add watering charges at 1 on material, bnklnr add sundries charges at 1 on material, bnklnr coarse sand zone iii, bnklnr granite trap broken metal 100 mm and down size, bnklnr labour charges for handing errection of rcc rings etc 5, bnklnr transportation ch

corporations/Associations/Others

CTN :39773102

31 Mar, 2025 12.40 Lacs

Ahmedabad - Gujarat

Tender For providing of facility management services - lumpsum based - pumping station; supply installation testing commissioning and labor work; consumables to be provided by service provider (inclusive in contract cost)

Labor Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

State Government

corporations/Associations/Others