Latest laboratory testing spares Tenders | Government laboratory testing spares Tenders

Central Government/Public Sector

CTN :45404169

06 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply and testing with end termination, intermediate termination and cord-end termination of over current protection system along with full end termination along with residual current protection operated on 230v ac supply with load current 40a, 2 pole conforming to is 12640 (part 2):2008 iec61009-1:1996 or latest with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 40a copperpalm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking 1 resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16 with earth leakage protection of 30 ma, with cord end termination suitable for copper cable of conductor size 1.5 sqmm with cord-end termination, manufactured out of ec grade aluminium extruded extension tubes of minimum purity 99.5% and conductivity not less than 60% iacs, designed and fabricated strictly in accordancewith is:5082 specifications, duly conforming in all respects to is:2121 part-i & ii and is:2544 with provision for sustaining continuous operating temperature up to 120 degree c under specified service conditions. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45358451

11 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For work of inspection and scanning of boiler water wall tubes for localized defects and internal corrosion by remote field electromagnetic testing using e-pit technique and dpt of welding joints in u#3 during coh.

Central Government/Public Sector

CTN :45337656

18 Jun, 2026 NA

Bhavnagar - Gujarat

Tender For supply, installation, rewiring and testing of existing high mast with 4 sqmm 5 core electro propel rubber cable for 30 meter height high masts per is:694 along with terminal connector 440v, 30a ampere copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 4 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 61 7-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 35 with current rating of minimum 10a size 2.5 and 99.9% etp grade copper conductivity 97% iacs minimum, finish tin-plated, conforming to standards bs:en-61238 and other accessories [ warranty period: 30 months after the date of delivery ] ]

CTN :45238264

01 Jun, 2026 NA

Farrukhabad - Uttar Pradesh

Tender For corrigendum : supply of no 15 pack of 06 , alcohol 100 percentage bott of 500 ml , endofrost dental cold spray for pulp vitality testing , silicon soft liner material cartridge of 50 ml , patient disposable drape , tooth mousse cpp-acp remineralizing dental cream , auto chemical cure activated bleaching kit , gingival barrier light cured , optragate cheek and lip isolation system , autoclavable dental intraoral cheek lip and tongue retractor for whitening , non eugenol temporary crown and bridge cement , light cure calcium silicate pulp protectant oblique liner , gel for root canal preparation containing water soluble lubricant 15-17 percentage edta tube 0f 3-5 gm , sol povidone bott of 100 ml , abrasive mounted diamond fg round 1 point 8 mm , plaster dental stone pkt of 1kg , pedodontic diamond burs air rotor straight round ,tapered and fissure set of 04 , self cure acrylic powder pink shade bott of 110 gm with rapid repair liquid 110 ml , self cure acrylic powder clear shade bott of 110 gm with rapid repair liquid 110 ml , bur, round tungsten carbide for fg 1 point 0 mm pkt of 10 , k file ss size no 8 length 25 mm set of 6 , k file ss length 25 mm size no 15-40 set of 6 , endodontic files system for retreatment , n-95 mask without respirator valve , anti carious fluoride rinse mouthwash with sodium fluoride mouth wash with sodium fluoride acidulated phosphate bott of 300-500 ml , dextrose monohydrate for oral use in pack of 100 gm with or without vitamins and minerals , heavy duty gloves , ultrasonic cleaning solution with corrosion protection pkt of 20-25 pouches containing 15 ml each , polyamide monofilament. size 3-0,7 80cm 3 by 8 circle reverse cutting, 25- 30 mm , polyglicaprone size 4-0, 7 75 cm, 3 by 8 circle reverse cutting 15-20 mm , polypropylene blue monofilament, 70- no 75 cm, size 4-0, half circle rb, 25 mm double needle , zinc phosphate cement powder 90-100 gm, liquid 35-40 ml , topical anesthetic cream flavored strawbwerry , flowable light cure gic , elastomeric impression material putty , sticks tracing red or green soft pkt of 10 , gp solvent bott of 10-20 ml , reinforced quartz fibre post-kit complete with sizes 1,2,3 assorted , denture cleaning tablets pack of 30- 40 tablets , gates gidden drill size 1-6 length 28 mm , bio- medical waste colour coded bags red blue black yellow each , dust collecting bag pkt of 50 , artificial saliva bott of 100-150 , pain relieving mouth wash benzodiamine , alvogel bott of 20 gm , patient bib, plastic , composite finishing and polishing kit , fiber reinforced composite strip for splinting light cure 22 cms in length in asserted sizes of 2,3,4 mm width , sol sodium hypochlorite 2 percentage for endodontic irrigation of 500ml , collagen plug 18x20 mm , collagen plug 12x20 mm , cement zoe reinforced temporary 20-30 gm irm , fg ceramic soft tissue bur round 1point4 mm , tray adhesive for elastomeric impression material bott of 10-20 ml , dual cure resin cement paste form , endodontic access bur set of 6 , endodontic safe non cutting ended bur for access cavity set of 2 , regular oblique medium body elastomeric material 4x50 ml cartridge , dimond bur point 0 round , dimond bur 1 point 4 round , bur tapering fig diamond for crown and bridge 847 oblique 012 , latex elastic grey 1 by 4 inch, pkt of 1000 orthodontic intra oral elastics , arch wire ss preformed ideal arch form lower 0 point 016 x 0 point 022 inch rectangular , arch wire ss preformed ideal arch form upper and lower 0 point 019 x 0 point 025 inch rectangular 03 upper and 03 lower k- files 15-40 size 21 mm (set of 6), k-file no 06 size 21 mm (set of 6), k-file no 06 size 25 mm (set of 6), k- files no 08 size 21 mm (set of 6), k- files no 10 size 21 mm (set of 6), h-file no 10 size 21 mm (set of 6), h-file no 10 size 25 mm //bid details 2 / 68

CTN :45343668

11 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of equipments for materials testing lab for civil department - spring testing machineload & displacement sensing load cell capacity: 0 10 kn accuracy: 1% fs (better if 0.5%fs) displacement sensor lvdt / digital encoder accuracy: 0.5 mmmachine design frame: rigid steel frame with crosshead movement type: mechanical screw with hand wheel (simple & robust) or electromechanical actuator (for smoother, controlled motion) crosshead travel: ~150 200 mm safety guards: transparent shields around moving partsfixtures & accessoriesspring testing compression plates (ground & parallel) tension hooks / eyelets for extension springs set of spacers / adapters for small springs tensile testing standard tensile grips wedge or screw type calibration certificate for load cell standards complianceensure compliance with basic material test standards such as: astm e4 / iso 7500-1 calibration of force measurement astm e8 / iso 6892 tensile performance & accuracy load accuracy: 1% fs displacement accuracy: 0.5% repeatability: 0.5%, rockwell cum brinell hardness testing machine min initial test force :10kgf, total test force range : 60kgf,100kgf,150 kgf, max. height of specimen :215 mmmin distance from indenter center tomachine wall :132 mm accessories : steel ballpreferred indentor 1/16" preferred steel ball: 1/16"and with all standard accessories to run the machine, direct shear machinestandard compliance:the equipment shall confirm to bureau of indian standards is 2720 (part 13) and equivalent astm international astm d3080.technical specifications:shear box size: 60 mm 60 mm 25 mm specimen size (complete with grid plates, porous stones, and specimen cutter).normal load capacity:minimum 5 kn with loading yoke and calibrated loading hanger set.shear load capacity:minimum 2.5 kn or 5 kn with calibrated proving ring (with calibration certificate).rate of strain (shear displacement):variable speed drive with controlled displacement ranging from 0.01 mm/min to 1.25 mm/min (motorised model preferred for uniform rate control).displacement measurement:horizontal displacement dial gauge: 0.01 mm least countvertical displacement dial gauge: 0.002 mm or 0.01 mm least countloading frame:rigid, heavy-duty loading frame with corrosion-resistant finish.drive system:motorised with single phase 220 230 v, 50 hz power supply.accessories (to be supplied complete):shear box assembly, proving ring with calibration chart, two dial gaugesloading weights and hanger, porous stones (2 nos.), specimen cutter, tool kit, flow table test apparatusdimensions and specifications as per is 9103, table top made from flat metal plate, minimm thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

CTN :45348093

11 Jun, 2026 NA

Agra - Uttar Pradesh

Tender For providing of custom bid for services - supply installation erection testing and commissioning of 100 feet tall national flag mast system including all accessories and electrical components- hot rolled ms plate, base plate and anchor bolt 3. surface finish: (a) painting: polyurethane (pu) white paint (b) dry film thickness: minimum 110 microns (c) glossy finish (d) corrosion-resistant and weatherproof 4. flag mast accessories: the following accessories must be supplied and installed a) stainless steel wire rope of 8 m b) compensating disc c) l- stoppers d) manual operating handles e) mounting plates f) gi junction box g) complete aluminium accessories h) lightning arresters i) flag clamps j) ss fastners 5. electrical components: 1. double dome aviation light -1 no. 2. led flood light of 400 watts - 2 nos. (make - haveels/crompton/bajaj/ philips with minimum 1 year warranty) 3. electric motor of 1.5 hp capacity for lowering and raising of flag. (reputed indian make) 4. outdoor feeder pillar panel: weather proof, grey enamel painted and without meter provision.

CTN :45326601

10 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For supply of equipment for logistics department - paper tearing test measuring range 0 to 1000 mn capacity resolution 0.1 mn indication error 1 % tearing arm 104 1 mm tearing angle 27.5 0.5 tearing distance 43 0.5 mm, paper puncture testing machine energy range of weights - 6, 12, 24 joule per meter accuracy - 2% within full range release angle of pendulum - 90 display - led (digital) 7 segment power - 220v, 50hz,single phase highlights: sample holder - 1 pendulum release mechanism -manual material -mild steel finish - powder coated havel gray & gray combination finish and bright chrome/zinc plating for corrosion resistant finish, weighing machine max capacity (max) maximum load the scale can measure. (3 kg ), min capacity (min) minimum load required for accurate measurement. (0.25 kg), 0.1 g 1 g resolution, sling psychrometer, bursting strength tester capacity: commonly 0 40 kg/cm . accuracy: +or -1 % of the full range (often within 10% to 90% of capacity). resolution: 0.1 kg/cm . operation: microprocessor-based, digital display (lcd/led) with peak hold test fluid: glycerin (approx. 98% purified). power requirement: 220v, single phase, 50 hz. memory. clamping: pneumatic or manual, often with 1/4 hp motor. fluid displacement rate: 95 + or 5 cc/minute., digital micrometer (0-25mm with least count 0.0010) (0 25 mm, 0.001 mm), digital vernier caliper (0-150mm)

State Government

CTN :45324128

29 May, 2026 NA

Parli - Maharashtra

Tender For work of inspection of boiler water wall tube and corrosion mapping by remote field electromagnetic testing reft & oxide thickness in unit 7 overhaul at bm-i,250mw, tps, parli-v.

Central Government/Public Sector

CTN :45173527

26 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of copper corrosion testing assembly for atf testing for neelam platform chemistry lab

CTN :45238230

28 May, 2026 5.37 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For supply of visual survey visual inspection for surface damages damage classification the visual inspection shall largely cover areas of high distress corrosion moisture , rebound hammer test for determining the estimated compressie strength of concrete and iniformity of concrete , ultrasonic pulse velocity test for ascertaining the quality of concrete uniformity of concrete in terms of soundness and density of concrete , core extraction and testing extracting the concrete core samples following the codal provisions and evaluating the properties , half cell potential test measuring the half cell surface potentials at selected locations on rcc members , carbonation test measurement of carbonation depth by phenolphthalein spray test at selected locations , ph value to check alkanity fo concrete as per relavent , report interpretation and recommendation , report interpretation and recommendation preparing and submitting comprehensive report consisting of findings from visual inspection , repairing methodology and retrofitting scheme for structural serviceability and safety ) /bid number : gem/2026/b/7517515 * /dated: 18-05-2026 & & / bid document 1 / 19

Laboratory Testing Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector