Tender For building material - store material, cement (is) (rate 50 kg per bag) 43 grade 53 grade ordinary portland cement (opc) ppc-portland pozzolana cement, (is) thermo mechanically treated bars (tmt) mild steel rod (rate per kg) required in 8mm, 10mm, 12mm dia, sand (white sand) (rate per cubic metre) excluding void is: 1542 is: 2166 for using it in construction works, aggregate (rate per cubic metre) excluding void 20 mm nominal size graded stone aggregate 20 mm nominal size graded stone aggregate, hard moorum (rate per cubic metre) excluding void hard muram having cbr> 12%, stone dust (rate per cubic metre) excluding void crusher stone dust, brick (rate per thousand numbers)size (190*90*90 mm) well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process crushing strength not less than 40 kg/cm to and water absorption not more than 15% , floor tiles (rate per square feet)size 300x300 mm ceramic glazed tiles istiles thickness 6 to 7 mm, wall tiles (rate per square feet)size 300x450 mm ceramic glazed tiles istiles thickness 6 to 7 mm, western commode (rate per each)size 360mmx475mmx395mm anti-germ fluoro-polymer coated water closet european type w. c. pan size 360x475x395 mm with solid poly propelyne made soft closing seat cover., wash basin (rate per each)size- 570mm x 470mm x 190mm all fittings and fixtures, door frame (rate per kg)size 100mm x 50mm x1.6mm profile c of 1.6 mm thick single rebate is 4351 manufactured from commercial mild steel sheet, flush door (rate per metre)size- 1800 mm x 850 mm x 35 mm is marked flush door shutters is: 2202 (part 1) decorative type, core of block board construction with frame 1st class hard wood and well matched teak 3 ply veneering with vertical or cross bands and face veneers on both faces of shutter, gi pipe size- 32 mm dia (rate per meter) is mark g.i. riser pipe as per i.s. 1239 minimum thickness 3.2 mm, gi pipe (rate per metre)size 65 mm dia galvanized iron (ms) pipes is-1239 nominal bore in 65 mm minimum thickness in 3.6 mm, hdpe pipe (rate per metre) size- 50 mm dia hdpe 100is 4984/ 14151/ 12786/ 13488 minimum thickness 3.6 mm, wire (rate per running meter) size- 4.0 sq.mm multi strand submersible flat cable is marked 3 core copper wire, water storage tank pe capacity 500, 1000, 10000 ltr. (rate per nos), socket (rate per nos) size 66 mm dia galvanized iron (ms), elbow (rate per nos) size 66 mm dia galvanized iron (ms), pvc pipe (rate per metre) the oriented un-plasticized polyvinyl chloride pvc-o pipes for potable water supply as per is: 16647-2017 duly inspected and tested and having bis certification mark size (20 mm) dia minimum thickness 2.87 mm size 1 (25 mm) dia minimum thickness 3.38 mm size 1 (40 mm) dia minimum thickness 3.68 mm
Tender For supply of external emergency light, as per drawing: edml 233 rev. 0, am-1, packing instruction: emergency light fitting:- wrapped in eco friendly bubble wrap or wrapped in transparent bi odegradable polymer and packed in a card board box (two ply corrugated) with eco frien dly corrugated packing sheet on all sides and tied with 3 packing strips horizontally and 3 vertically. every material used in packing should be eco friendly /environment friendly . a list should be pasted on each box showing order no ,pl no, description of the item,drg.n o/spec.no, qty,firm's name & address and dateof despatch etc. [ warranty period: 30 months after the date of delivery ]
Tender For supply of external emergency light, as per drawing: edml233 rev.0 am-1 cor.1, packing instruc tion: emergency light fitting:- wrapped in eco friendly bubble wrap or wrapped in transpare nt biodegradable polymer and packed in a card board box (two ply corrugated) with eco f riendly corrugated packing sheet on all sides and tied with 3 packing strips horizontally and 3 vertically. every material used in packing should be eco friendly /environment frien dly .a list should be pasted on each box showing order no ,pl no, description of the item,d rg.no/spec.no, qty,firm's name & address and date of despatch etc. [ warranty period: 30 mo nths after the date of delivery ]
Tender For king size cot (wooden double cot) material : kerala solid teak wood (grade ii), head board & leg board 4 inch x 4 inch solid teak wood (back 18 mm ply) and platform: side bar 5 x 1.5, inner bar- 4 x 1.5, bed side 12mm wood, bottom side 3 x 1.5 (6 nos) inches, size: king size (6 feet x 6.5 feet ), weight of material: 118 kg (plus or minus10 kg), size: 84d x 75w x 44h inch, style: antique traditional (as per photo attached), colour: teak finish matte, storage: without storage, polish: sheenlac polish & melamine semi m atte king size cot (sheenlac material only), warranty: 10 years, service centre: service centre should be a vailable at any of location over salem division jurisdiction. supply: mettupalayam, tiruppur, podanur jn. 1 s ample to be supplied at consignee office before full supply. detailed specification and photo is attached as annexure. [ warranty period: 120 months after the date of delivery ]
Tender For supply of ply wood board 19 mm thick 8 ft x 4 ft , ply wood sheet 12mm thick ,8 ft x 4 ft , plywood sheet 8ft x 4ft x 6mm , laminated sheet 8 ft x 4 ft x 1.5mm thick , 1 inch concrete nails dia 3mm , 1 and half inch concrete nails dia 3.2mm , 2 inch concrete nails dia 3.6mm , teflon tape 12mm width x 10mtr length
Tender For supply of ply board size 6 x 3 ft , iron cutter blade 4 inch blade size 107x1 point 2 x16mm , star bit size 8 mm , bit magnet length 67 mm , tape , tiles 1x1 thickness 8 mm , cgi sheet 10 ft length 10 ft and thickness 2 mm , grout , t patti 4 ft , t patti 2 inch , ceiling wire diameter 5 mm , railing steel , ball 2 inch value pressure rating 1000 psi , mcv 63 amp 415 volt , bed side mat size 120 x 40 cm , white cement , ceiling 2x2 thickness 8 mm and colour white , revolving chair leather black , mcv over , bottom frame , iron patti 10 ft , t patti 12 ft
Tender For custom bid for services - upgardation of nom tensile structur-fabrication work- fabrication of vertical member galvanised iron 150*150*1.6 mm box section frames for, entrance canopy size 140feet (07 nos weighting 500 kgs, fabrication of harizontal 100*50 mm 16mm gi box, frame, (a) size-400 feet (20nos) section size-600 feet (30nos) weigning-1200 kgs for ceeling, fabrication of vertical section member of galvanised iron 60*40*1.6mm for blocking the view & beaufication of venue - weighing 1900kgs, fabrication of circular ribs cross section supporled on the glavanised pole size +8+200mm for beautification of bar counted- weighing-450 kgs, fabrication of raise wooden metal fabrication table, acp panneling for entrance canopy, sheet roofing with sunglansed polycarbonite sheet, setting up of bar counter, circular counter for serving with services providing of shelves for storage of bottle, providing of under counter refrigerator providing/fixing of customises basin sink, plumbing work, providing/fixing of under counter storage shelves size-10ft 2.5ft*2feet+10nos, providing/fixing of l shape counter with wooden laminate 19mm ply size-5ft *2.5*2ft application of alluminium composite panneling for back drop of bar counter, providing & fixing vertical racks for display beautification of counter size (10ft 6ft) fixing of inverted glass holder, high raised stool, surface preparation application of one coated oxide primer on the fabricalled structure, providing & application of powder coated antirustblack coat colour then on existings & jr new frames, painting work, +, providing & application of wave theme paint coat on the vertical ribs strcture, electrical work, providing & fixing of inverted hanging antique lights for beautification to light up the venue space, providing & fixing of spot light for the internal fabricated false ceeling & bar counter, providing/fixing of profile led lights for beautification, electricalpoints, switch/sockets/modular box, with, wiring2.5 sqmm 2 core (including laying) 1.5sqmm*2 core*150*95, cable concealed conduit pipes, main junction box, electrical labour charge, providing/fixing of projection screen 10+6, feet, led neon name board for venue 4ft*1.5ft, transportation as actual loading/unloading alabour charges, design consultant fee