Latest laminated glass Tenders | Government laminated glass Tenders

Central Government / Public Sector

CTN :39861003

17 Apr, 2025 NA

Secunderabad - Telangana

Tender For supply of laminated glass wind screen (glass) for modified wap-4, wag-9 & wap-7 locos, item n o. 3 of clw drawing no. 1209-08-130-263 alt-03 or latest. (the dimension is 880 mm against 886 mm and 705 mm against 712 mm). as per clw specification no. clw/ms/3/027 alt-6 or latest. [ warranty period: 30 months after the date of delivery ]

CTN :39846595

17 Apr, 2025 NA

Panchkula - Haryana

Tender For supply of led fitting 2 feet x 2 feet recess mounting for ceiling 36 watt , led recessed panel 1 feet x 4 feet 36 or 40 watt , cable pvc flat aluminium twin core 2 x 16 sqmm , cable pvc flat aluminium twin core 2 x 10 sqmm , pvc cable 3 core 2 point 5 sqmm copper roll of 100 mtr , cable pvc flat aluminium twin core 2 x 6 sqmm , cable 3 core 1 point 5 sqmm copper roll of 100 mtr , led fountain light coloured 20 watt for under water , cable pvc flexible copper conductor single core 2 point 5 sqmm roll of 100 mtr , cable pvc flat aluminium twin core 2 x 4 sqmm , modular socket 16 amp make ssk grand or abb only , gi tubing 20mm isi marked , modular fan regulator socket type 6 amp make ssk grand or abb only , floor door closer , modular switch 6 amp 1 way make ssk grand or abb only , cable pvc flexible copper conductor single core 1 point 5 sqmm roll of 100 mtr , plywood commercial bwr 244cm x 122cm x 6mm , glass sheet frosted 600mm x 1200 x 3 point 8mm , socket 3 or 5 pin 15 amp flush type , pre laminated particle board 12mm 8 feet x 4 feet , gi tubing 15mm isi marked , modular switch 16 amp make ssk grand or abb only , patchmat star bitumen polycarbonate mixer in 25 kgs pack , gi tee 15mm isi marked , modular fan regulator switch type 6 amp make ssk grand or abb only , plywood commercial bwr 244cm x 122cm x 8mm , plywood one side teak face 244cm x 122cm x 4 mm , plywood commercial bwr 244cm x 122cm x 4mm , hack saw blade double edge , brass nozzle 20mm for fountan , aluminium inline connector 300 sqmm pkt of 50 , gi tee 20mm isi marked , plug top 3 pin 15 or 16 amp , mortice lock isi marked for aluminium door , aluminium inline connector 185 sqmm pkt of 50 , insualtion tape self adhesive 20mm x 25mtr long , cement 43 grade 50 kg bag each , enamel synthetic exterior undercoating high glows paint color smoke grey , switch 15 or 16 amp paino type , mcb distribucation box 8 way , gi union 25mm isi marked , gi socket 20mm isi marked , frame plate with matching 12 modular , aluminium inline connector 150 sqmm pkt of 50 , brass spindle 15mm for cp bib tap , gi nipple 15 mm dia 100mm long , modular socket 3 pin 6 amp make ssk grand or abb only , capacitor 2 point 5 mfd , gi elbow 25mm isi marked , switch 5 amp paino type , gi nipple 20 mm dia 9 inch long , aluminium thimble 400 sqmm pkt of 50 , casing caping pvc 25 x 16mm length of 2mtr , frame plate 8 module , gi elbow 15mm isi marked , ht tape , frame plate 6 module , aluminium inline connector 120 sqmm pkt of 50 , frame plate 4 module , gi socket 15mm isi marked , aluminium thimble 185 sqmm pkt of 50 , insulation tape 20mm x 65 mtr long , magnetic catcher , gi socket 25mm isi marked , aluminium thimble 120 sqmm pkt of 50 , gi nipple 20 mm dia 50mm long , spray nozzle cp brass size 15mm dia with adjustment , gi nipple 20 mm dia x 100mm long , aluminim hasp and staple of size 100mm , gi nipple 15 mm dia 50mm long , gi elbow 40mm isi marked , aluminium thimble 300 sqmm pkt of 50 , aluminium inline connector 50 sqmm pkt of 50 , aluminium inline connector 95 sqmm pkt of 50 , obd 20 lts bucket , frame plate 3 module , white cement in 1 kg pack , putty readymade for glazing 10 kg pack , gi plug 15mm , gi union 40mm isi marked , aluminium thimble 35 sqmm pkt of 50 , aluminium thimble 50 sqmm pkt of 50 , gi reducing tee 20mm x 20mm x 15mm isi marked , gi reducer tee size 20x 15x 15mm dia isi marked , gi female elbow 20x 15mm isi marked , switch board boxes 3 modular plastic body , pvc internal fitting kit single flush for cistern , ball valve brass of size 40 mm , aluminium thimble 240 sqmm pkt of 50 , aluminium thimble 150 sqmm pkt of 50 , switch board boxes 6 modular , cover for pvc water storage tank 1000 ltrs with nut bolt , ball valve brass of size 20mm , medium density fibreboard mdf both side laminated teak face 2440mmx1220mmx19mm , plywood teak face one side 2440mmx1220mmx12mm , beeding teak wood 20mmx6mm , peg hook brass , plywood teak face one side 2440mmx1220mmx4mm , lock for almira

Central Government/Public Sector

CTN :39843680

16 Apr, 2025 NA

Nagpur - Maharashtra

Tender For provision of polycarbonate sheet on staircase grc jali, acp band over external glazing, and m.s canopy covered with acp over conventional block at iim nagpur

CTN :39826848

08 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For clean room (d block - iitm rp) - partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-50 mm thick ppgi/ ppgi wall panel for coloumn, partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-100 mm thick ppgi/ ppgi wall panel for coloumn, wall paneling of ppgi/ppgi of 100 mm thick with 40 mm of glass wool panel, desnity 100kg.m3, non combustable, penling color as per architect choice. with necessary double door of equal size as per site condition. fittings complete all. panel of three side with roof necessary duct cut otu with proper seal to be done as per site for sound insulation., panel thickness : 100 mm ppgi/ppgi wall raiser ( 700 width x depth less than 80 mm), walkable ceiling panels ppgi/ppgi -double skin modular clean room walkable ceiling panels made with 0.6 mm pre coated sheets on both side with puf as infill of density of 40 2 kgs/m3. -50 mm thick ppgi/ ppgi ceiling panels, cleanroom doors -50mm thick flush frame made of 1.2 mm thick gpsp powder coated sheet, 0.8 mm thick pu powder coated gpsp sheet with honey comb kraft paper as infill of 46mm thk shutter suitable for 50mm thk frame, including all the accessories like double glazed veiw glass, hardwares like push plate, kick plate, non concealed door closure. ss d handle, ss ball bearing butt hinges, both side key operated lock & key. concealed drop seal per leaf and concealed flushbolt for double leaf door etc.- single leaf door - size 1000 x2100 mm, double leaf door size 1800mm x 2100 mm, double leaf door size 2000mm x 2100 mm, view panels -double glazed view 5 mm toughned glass with flush design, 50 mm thick flush view panel made of 1 mm thick gi frame with puf as infill in- between the frame., coving & corners -male & female r-70 powder coated coving, 2d / 3d internal powder coated corner coves, external 90 degree powder coated coving, bottom track for panel, silicon sealent for panel to panel joint, supply, installation of air shower- microflow make mfd-as -1200 model. inner dimension- 900x1220x1950 (h), over dimension of -1800x1320x2200(h), cabinet, platform stainless steel-304, of 1 person capacity, gi powder coated with flush double glazing , hardware like door closure, d handle, ball bearing butt hinches door with vision panel, pre filter - flange type of 90% efficiency, pressure drop -6 to 8 mm, hepa filter box type, 00.007 % efficiency, pressure drop of 25 mm of w.c, adjustablke nozzle of 30mm, as per manufacuter specification , control motor by dol starter, doors by electronmahnectic inter locking, overload protection, thermal relay,emergency off- push button. complete all. consider micro flow, design , supply, providing of esd mat flooring of homogeneous composition with block conductive layer sandwhich between two antistatic layers. of bs 2050 /1978is 3462 /1986 governing specification. thickness of the materials 2 mm +/-0.1mm( 0.5mm sandwhich conductive layer), electrical propertie : surface resistivity 108 -1010ohms/sq. decay time: less than 2 seconds. including copper strip below mat to connec the earth bus complete all. with an thermo welding process complete all., panels as per technical specifications & schematic diagram., supply, installation, testing and commissioning of indoor type lt switchboards, floor mounting type, bottom/top entry. refer enclosed sld. enclosure: compartmentalized single front crca (cold rolled cold annealed sheet steel) doors:2mm body:2mm gland:3mm covers and partitions:1.6mm ip class for indoor/ip55 with weather proof enclosure for outdoor bus bars: electrolytic grade conductivity as per standard is 5082 bus bar material: as per sld bus bar joints: shroude

CTN :39832256

08 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For tender for clean room - partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-50 mm thick ppgi/ ppgi wall panel for coloumn, partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-100 mm thick ppgi/ ppgi wall panel for coloumn, wall paneling of ppgi/ppgi of 100 mm thick with 40 mm of glass wool panel, desnity 100kg.m3, non combustable, penling color as per architect choice. with necessary double door of equal size as per site condition. fittings complete all. panel of three side with roof necessary duct cut otu with proper seal to be done as per site for sound insulation., panel thickness : 100 mm ppgi/ppgi wall raiser ( 700 width x depth less than 80 mm), walkable ceiling panels ppgi/ppgi -double skin modular clean room walkable ceiling panels made with 0.6 mm pre coated sheets on both side with puf as infill of density of 40 2 kgs/m3. -50 mm thick ppgi/ ppgi ceiling panels, cleanroom doors -50mm thick flush frame made of 1.2 mm thick gpsp powder coated sheet, 0.8 mm thick pu powder coated gpsp sheet with honey comb kraft paper as infill of 46mm thk shutter suitable for 50mm thk frame, including all the accessories like double glazed veiw glass, hardwares like push plate, kick plate, non concealed door closure. ss d handle, ss ball bearing butt hinges, both side key operated lock & key. concealed drop seal per leaf and concealed flushbolt for double leaf door etc.- single leaf door - size 1000 x2100 mm, double leaf door size 1800mm x 2100 mm, double leaf door size 2000mm x 2100 mm, view panels -double glazed view 5 mm toughned glass with flush design, 50 mm thick flush view panel made of 1 mm thick gi frame with puf as infill in- between the frame., coving & corners -male & female r-70 powder coated coving, 2d / 3d internal powder coated corner coves, external 90 degree powder coated coving, bottom track for panel, silicon sealent for panel to panel joint, supply, installation of air shower- microflow make mfd-as -1200 model. inner dimension- 900x1220x1950 (h), over dimension of -1800x1320x2200(h), cabinet, platform stainless steel-304, of 1 person capacity, gi powder coated with flush double glazing , hardware like door closure, d handle, ball bearing butt hinches door with vision panel, pre filter - flange type of 90% efficiency, pressure drop -6 to 8 mm, hepa filter box type, 00.007 % efficiency, pressure drop of 25 mm of w.c, adjustablke nozzle of 30mm, as per manufacuter specification , control motor by dol starter, doors by electronmahnectic inter locking, overload protection, thermal relay,emergency off- push button. complete all. consider micro flow, design , supply, providing of esd mat flooring of homogeneous composition with block conductive layer sandwhich between two antistatic layers. of bs 2050 /1978is 3462 /1986 governing specification. thickness of the materials 2 mm +/-0.1mm( 0.5mm sandwhich conductive layer), electrical propertie : surface resistivity 108 -1010ohms/sq. decay time: less than 2 seconds. including copper strip below mat to connec the earth bus complete all. with an thermo welding process complete all., panels as per technical specifications & schematic diagram., supply, installation, testing and commissioning of indoor type lt switchboards, floor mounting type, bottom/top entry. refer enclosed sld. enclosure: compartmentalized single front crca (cold rolled cold annealed sheet steel) doors:2mm body:2mm gland:3mm covers and partitions:1.6mm ip class for indoor/ip55 with weather proof enclosure for outdoor bus bars: electrolytic grade conductivity as per standard is 5082 bus bar material: as per sld bus bar joints: shrouded/tinned

Central Government/Public Sector

CTN :39670252

03 Apr, 2025 NA

Medak-T - Telangana

Tender For corrigendum : supply of epoxy laminated glass fabric base sheet 0.5

Central Government/Public Sector

CTN :39837670

04 Apr, 2025 NA

Delhi - Delhi

Tender For supply of set of laminated glass for wag-9 loco (03 items 03 nos)comprising cab window glass and positive catch drawing no. els/et/trs/1/m-1/2023/01 sheet no.2/2 as per is-2553(t) and glass for door for wag-9 locomotive to drawing no. trs/gmo /m-1/g-9/004/er as per is-bis 2553(l) and laminated side safety glass for window to drawing no. c/els/lgd/bf/3/49 alt.1(latest specification). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39849178

04 Apr, 2025 NA

Bhusawal - Maharashtra

Tender For supply of laminated glass transparant for front window of wap-1 loco clw drg.no. 03.1.35.6 alt-3. ref.7.

Central Government/Public Sector

CTN :39787717

21 Apr, 2025 NA

Pune - Maharashtra

Tender For supply of set of laminated glass for wag-9 locomotive one set comprising of 04 items in 71 nos. as per sketch no. els/aq/wag-9/sk.no. 0076 rev-3 [ warranty period: 30 months aft er the date of delivery ]

Central Government / Public Sector

CTN :39756637

10 Apr, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply of laminated glass for wind screen for wag-9 locomotives as per s.c.railway drawingno. b/trs/g7/cab/4/1 with latest alteration if any. note: each glass should be packed neatly to avoid scratch marks on either side andsupplied. note: clw approved sources shall only participate in the tender or supplier offers shall be considered with valid tender specific authorisation certificate from clw source shall be submitted along with their offer.

Laminated Glass Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector