Latest lantern Tenders | Government lantern Tenders

Central Government/Public Sector

CTN :39322808

10 Apr, 2025 NA

Guna - Madhya Pradesh

Tender For corrigendum : supply of bosster pump manufacturing and supply pull out assembly of kirloskarbrothers limited (kbl) make admin booster pump (model:db 50/20). the pull out assembly shall consist of minimumfollowing parts, but not limited to: (1) pump shaft; (2)impeller: (3) wear plate (drive end); (4) shaft sleeve; (5)impeller lock nut; (6) bearing drive end and non drive end;(7) bearing housing; (8) stuffing box housing; (9) bearingcover; (10) bearing cap; (11) lantern ring; (12) gland; (13) | quantity - 1

corporations/Associations/Others

CTN :39652096

07 Apr, 2025 NA

Bardhaman - West Bengal

Tender For corrigendum : supply of spare of potable water pump - bowl , bearing , seal ring , impeller , impeller lock , bowl , bearing for bowl , pump shaft , pump shaft coupling , head shaft , packing box bearing , lantern ring , packing gland , adjusting nut , flexible

CTN :39857980

18 Apr, 2025 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of procurement of marine navigational led lantern equipment with 10nm luminous range.

Central Government/Public Sector

CTN :39873310

08 Apr, 2025 8.94 Lacs

Chandrapur - Maharashtra

Tender For supply of casing wear ring part no. 317129s150 , impeller key part no. 317137s150 , coupling key part no. 317138s150 , sleeve nut part no. 317146s150 , split gland part no. 317144s150 , lantern ring part no. 317149s150 , stufffing box bush d.e part no. 317260s150 , stufffing box bush n.d.e part no. 317292s150 , inter- stage bush part no. 317300s150 , inter-stage sleeve part no. 317301s150 , o ring for shaft sleeve part no. 317296s150 , bearing locknut part no. 317141s150 , bearing lock washer part no. 317142s150 bid number/ & ( * ) : gem/2025/b/6097605 dated/ + : 28-03-2025 bid document/ 3 3 1 / 18

CTN :39854175

15 Apr, 2025 26.97 Lacs

Kota - Rajasthan

Tender For tn-11166 supply of m/s dcips make spares for clinker grinder, jet pump and feed gate for bottom ash hopper and wetting head system for wet ash disposal from esp hoppers unit 5 ash handing plant of kstps, kota. - spares for excen crusher (clinker grinder) as per drg. no. 92-p-07-2b-582 of ahp stage-iii, cam group structure, material-durite, 500 bhn (part no. 1) 1 set = 8 nos., wear plate front (part no. 3) 1 set = 3 nos., wear plate back (part no. 4) 1 set = 3 nos., wear plate side (part no. 5) 1 set = 4 nos. (2 rh & 2 lh), shaft (shaft with shaft structure fitted with cam group structure, shaft sleeve, cam bolt etc.) material en24 part no. 2 - 1 set = 1 no., bearing housing for above clinker grinder (part no. 7), packing gland followers (part no. 12), packing gland (part no. 9) 1 set=2 nos., slinger (part no. 14), lantern ring material al. bronze(part no. 10), shaft sleeve ss410 (part no. 15), special type self locking square head bolt (ss410) with nut & lock nut with washer for segment plates, jet pulsion pump as per drg. no. 92-p-07-2b-591, jet pulsion pump complete assembly (1 no.) assembly consists of body combining tube, nozzle with insert, adapter, aligning ring flange clamp etc. but without tail pipe, spares for jet pulsion pump as per drg. no. 92-p-07-2b-591, combining tube, material -durite 500 bhn (throat cum tail pipe) (part no. 1), nozzle tip (ss-410) with nozzle insert (material ceremic) (part no. 2 & 13), nozzle adapter (part no. 3), flange clamp half , material ductile iron (n-8)(part no. 16), 9 flange clamp half (part no. 18), aligning ring (part no. 10), spares for ba hopper feed gate as per drg. no. 92p07-1b-572, renewable seat strip (part no. 2), side liner (part no. 3), bottom liner (part no. 4), roller (part no. 17), bush for roller (part no. 25), adjustable seating wedge (part no. 13), fly ash intake valve drg. no. 9207-2b-22, fly ash intake valve complete as per drg. no. 9207-2b-22, fly ash intake valve spares parts: -, hopper inlet body spares for faiv (part no. 1) for fly ash intake valve, body intake valve spares for for fly ash intake valve (part no. 2), nuva alloy 8 inch tee for ash intake valve (part no. 3), valve disc spares for for fly ash intake valve (part no. 4), removable seat spares for fly ash intake valve (part no. 5), shaft spares for fly ash intake valve (part no. 6), spring spares for fly ash intake valve (part no. 7), roll pin spares for fly ash intake valve (part no. 8), air cylinder 2.5" borex5" stroke spares for fly ash intake valve (part no. 9), yoke spares for fly ash intake valve (part no. 13), lever spares for fly ash intake valve (part no. 14), lever spares for fly ash intake valve (part no. 15), seal kit for air cylinder 2.5 bore x 5 stroke of fly ash intake valve, air intake valve drg. no. 9207-2a-11, air intake valve complete as per drg. no. 9207-2a-11, air intake valve spares parts: -, body spares for air intake valve (part no. 1), valve disc, ss- 316 spares for air intake valve (part no. 2), compression spring, steel-en 42b spares for air intake valve (part no. 3), valve stem, ss-410/416 spares for air intake valve (part no. 4), totally enclosed rotary slide gate drg. no. 9207-2a-40, totally enclosed rotary slide gate valve complete as per drg. no. 9207-2a-40, totally enclosed rotary slide gate (tersg) spares parts: -, bode spares for totally enclosed rotary slide gate valve (part no. 1), slide spares for totally enclosed rotary slide gate valve (part no. 2), shaft, en-8 spares for totally enclosed rotary slide gate valve (part no. 3), bush, bronze spares for totally enclosed rotary slide gate valve (part no. 4), seal strip, nitrile rubber spares for totally enclosed rotary slide gate valve (part no. 5), air cylinder spares for totally enclosed rotary slide gate valve (part no. 10), wetting unit head assembly spares parts:, body inlet piece, alloy ci spares for wetting unit head assembly (part no. 1), water chamber, fg-220, is-210 spares for wetting unit head a

CTN :39841423

21 Apr, 2025 36.50 Lacs

Panchkula - Haryana

Tender For disposal of list comprising of items from sr. no. 1 to 437 (single lot of 437 items) - the assistant director (tech.), govt. industrial dev centre for tool and dies and anodizing, jagadhari - hmt horizontal milling m/c, model fn2h with tool/ acc., roll grinding machine with tool/ accessories and two additional panels:- i) (bch make 4.8 kw dated 28-01-83) ii) (bch make 22 kw dated 28-06-83), i) r. s joist ii) wire rope type electrical hoist wire rope (fitted in hoist), i) hmt drill machine with accessories ii.) bench drill machine stand (m.s. angle ), i) gen set 48kw/60kva with acc. batteries, ii) heavy duty pedestal grinder gd-i with acc., bench grinder, jig boring machine with acc., universal measuring machine no.828 with acc., hmt universal cylindrical grinding m/c g-22 with acc., i) hmt heavy duty centre lathe m/c, model l- 45 with cutting tools/ acc. ii) electric hoist cap. 7.5 ton with platform 6.1x22 mtrs, fired furnace (53x36) with acc. [thermocouple, thermocouple, temperature indicator (digital)], i) pilot self raising portable genty crane stand cap. 5 m. ton without hoist ii) m.s garder/m.s plate & angle(fitted in genty crane stand) iii) electric hoist iv) wire rope with clamp (fitted in hoist) v) spur gear crane vi) trolley (overhead) vii) chain(fitted in crane), wire ropes( scrap), milling cutters (scrap), spanner set, loose spanner, surface block (marking block), nose plier, plier, universal protector combination set, file flat 10, steel almirah 50x30x17, type writer, vernier caliper 15cm, ms rack, rack, dp cutter 12dp no.7, toolkit consisting of 100mm dia cutter with arbor cutter 63mm, file flat 8, handle file wooden, pipe die with handle, pipe wrench, steel almirah78x40x21, steel rule12, oil cane, round die3/8 (broken), drill chuck with arbor, slitting saw cutter, tool holder 1/2", dog carrier 1, dog carrier, drill sleave, plier, bench vice, round die 5/8 (broken), circular table 400mm, spanner set, loose spanner, dial indicator, stand magnetic, digit micrometer 25-50mm code no. 193-102, file 10 with handle, m.s rack, carbide tipped centre, file, oil cane, file6, file, oil cane, tap set 3/8 (broken), drill chuck and drill chuck arbor, dog carrier 11/2, loose spanner, revolving centre, surface gauge (used) (marking block), outside inside caliper, m.s rack, flat file, flat file8, file 12, spanner set, try square, empty drums, steel almirah 78x40x21, screw driver 10, soldering iron, plier, pad lock, dial test indicator, dial test indicator, magnet stand- 7012 ii) pneumatic stand - 7015, pocket calculator, m.s rack, file8, digit micrometer 50-75mm, drill chuck, drill stand, steel tool cabinet765x435x1170mm, bench vice, digit micrometer 0-25mm code no.193-101, vernier 6-150mm, carbide tipped centre, bench vice 6, carbide tipped centre, hand reamer 20mm, table lamp, end mill 22mm, end mill 20mm, depth micrometer 0-50 mm, empty cylinder (15kg), thickness gauge code 184-103, dial indicator, outside micrometer with dial indicator (25-50mm), tap set (broken), drill 4mm (broken), metric measuring tape, dial caliper 150mm, pitte space master traveling trolley with drafting chair, aristo calculator, flat file 12, chain pulley block (trolly) cap. 5ton with r.s joist, steel rule12, lock, hacksaw frame 12, drill 7mm, digit micrometer 75-100mm code193-104, vernier caliper6, m.s rack, wolf precision tool post grinder with internal grinding attachment, revolving centre, outside inside compass, plier, steel rule24, shell end mill 40x16x32, tool cabinet 765x435x1170mm, drill chuck, vernier caliper6-150mm, drill 5/16, wall clock, wall clock, steel tool cabinet, library table 8x4x21/2, equal angle cutter 80x20x22mm 600, equal angle cutter 63x16x22mm, end mill 22mm, pad lock, g plate, i) optical comparator pj-250 with acc. ii) tool maker microscope, dial indicator, end mill 20mm, outside micrometer 100-125mm, convex cutter 63x8x22mm, orpat calculator, out side micrometer 0-25mm, flat file 10, screw driver, heater, i) vernier callipe

CTN :39842427

25 Apr, 2025 6.35 Lacs

Bhopal - Madhya Pradesh

Tender For providing and installation of octagonal led street light poles at various places and post top lantern at gwalbaba temple, hawkers corner main road in nariyal kheda in ward no 12, zone no.03, bhopal.

CTN :39842428

25 Apr, 2025 7.77 Lacs

Bhopal - Madhya Pradesh

Tender For providing and installation of tri-color led strip on octagonal and tubular street light poles, installation of 12.5 high mast at sharda nagar and post top lantern at peepal chauraha statue in nariyal kheda in ward no 12, zone no.03, bhopal.

State Government

CTN :39849676

03 Apr, 2025 27.57 Lacs

Delhi - Delhi

Tender For providing and fixing of 6 m height street light pole and fancy led post top, lantern and street light fittings at service road of k.n. katju marg, rohini.

Central Government/Public Sector

CTN :39730993

02 Apr, 2025 75.12 Lacs

Surguja - Chhattisgarh

Tender For corrigendum : supply of spares for kirloskar make pump - rotating assy for rkb 150-34k, 4 stage, part no.rkb15034k4stdftdsubrua , pump shaft- 4 stage c- 40, part no.rkb15034k4c40180 , suction casing moc-ci, part no.rkb15034kci113 , gland, ci, part no.rkb15034kci223 , bearing housing unit, moc-std, part no.dsm4rmstdsubbhudsm4 , top and bottom assembly ci, part no.dsm4rmcistaba , shaft sleeve, moc ci, part no.dsm4rmci310 , shaft sleeve moc ci, part no.dsm4rmci311 , impeller 1st stage c i, part no.dsm4rmci157 , impeller 2nd stage c i, part no.dsm4rmci158 , pimp shaft c-40, part no. dsm4rmc40180 , interstage ring, part nodsm4rmci204 , split gland ci 13b, part no.dsm4rmci229 , clamping plate s.gland, ms, part no.dsm4rmms224 , interstage diaphragm ci, part no.dsm4rmci462 , round lock nut, c-40, part no.dsm4rmc40335 , rotating assembly,moc- std-ftd, part no.dsm10036stdftdsubrua2 , shaft sleeve de-nde ci, part no.dsm10036ci310 , pump shaft, c-40, part no.dsm10036c40180 , semi open impeller, ci,q type, part no.shm6532qci151 , pump shaft, c-40, part no.shm6532nqc40180 , split gland , moc - ci, part no.shm6532nqci229 , shaft sleeve aisi410, part no.shm6532nqaisi410311 , helicoil insert, ss, part no.shm6532nqss479 , set of oil seals, rubber, part no.shm6532nqrubberssos1 , screw for impeller, aisi-410, part no.shm6532nqaisi410669 , back pull out asse for q type, std, part no.shm6532nqstdftdsubbpa , pump casing for npqr impellers, ci, part no.shm6532nqci105 , spacer for cartridge, ci, part no.shm6532nqci209 , bearing cover, ci, part no.shm6532nqci271 , rotating assembly std-ftd, part no.dsm12540stdftdsubrua2 , shaft sleeve de and nde, ci, part no. dsm12540ci310 , split gland moc ci, part no.dsm12540ci229 , wear ring, ci, part no.dsm12540ci190 , interstage ring, ci, part no.dsm12540ci204 , shaft sleeve nut bronze, part no.dsm12540br334 , set of o rings rubber, part no.dsm12540rubberssor1 , round lock nut c-20, part no. dsm12540c20335 , bearing housing unit, moc - std, part no.dsm12540stdsubbhudsm40 , bearing cap, part no.dsm12540ci274 , set of keys, part no. dsm12540aisi 410ssok1 , rotating assembly 7 stage std ftd, part no. rkb15034k7stdftdsubrua , shaft sleeve delivery side moc aisi-410, part no.rkb15034kaisi410311 , oil seal de-nde rubber, part no.rkb15034krubber500 , compression spring moc steel, part no.rkb15034kst483 , delivery casing, c.i., part no.rkb15034kci111 , lock washer moc steel, part no.rkb15034ksteel415 , hex socket grub screw moc steel, part no.rkb15034ksteel986 , bearing housing unit, std, part no.rkb15034kstdsubbhu34k , wear ring suction side, moc ci, part no.rkb15034kci190 , wear ring delivery side moc ci, part no.rkb15034kci191 , set of sealing connection, nylon, part no.dsm12540nylonsubsel , bearing housing unit, std, part no.dsm15046stdsubbhudsm46 , pump shaft, c-40, part no. dsm15046c4 0180 , lantern ring, bronze, part no. dsm15046br227 , interstage ring, bronze, part no.dsm15046br204 , shaft sleeve nut bronze, part no.dsm15046br334 , round lock nut, c-20, part no.dsm15046c203361 , round lock nut, moc - c20, part no.dsm15046c203362 , gland, dsm 150- bid details/ 2 / 55 46, part no.dsm15046ci223 , shaft sleeve de and nde moc bronze, part no.dsm15046br310

Lantern Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government/Public Sector