Latest lattice structure Tenders | Government lattice structure Tenders

Central Government/Public Sector

CTN :38289317

20 Jan, 2025 NA

Noida - Uttar Pradesh

Tender For bid to ras supply of lattice structure: mild steel yield stress e250, zinc coating 610 gms/sqm , extra coating on above for providing additional zinc coating of 100 gms/sqm

CTN :38955126

05 Feb, 2025 NA

Sonitpur - Assam

Tender For supply of lipo bty balance charger , lipo bty checker , drone simulator , drone motor , drone propeller , electronic speed controller drone , esc checker , esc programming card , thrust measurement meter

CTN :38978617

07 Feb, 2025 NA

Kharagpur - West Bengal

Tender For supply of micro controller based electronic speed indicating and recording system withspeed signal confirming to rdso specn.no. mp-0-3700.07 rev.-7 august -2017 scale range 0-120,voltage-24 v dc .each set consisting of following items. 1) recording cum indicator unit - 01no. 2) speed indicator -01 no. 3) pulse generator -01 no. 4) junction box - 01 no. 5)connectingcable - 01 set of 05 nos. (record to to indicator communication cable 25 mtrs.)

CTN :38900847

29 Jan, 2025 25.00 Lacs

Nagpur - Maharashtra

Tender For corrigendum : providing supplying. installation laboratory equipment at p.w. laboratory sadar, nagpur - providing supplying. installation & commissioning at required site of compression testing machine with automatic pace rate controller, capacity compressiontestingmachine(mu-2000kn)with flexure attachment including running software as specified in specification as directed by engineer in-charge.(with yearlycalibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying. installation & commissioning at required site of cement cube vibration machine. (with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying, installation & commissioning at required site of vibrating table for concrete cubes 50cm x 50 cm.(with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying, installation & commissioning at required site of concrete cutting machine.(with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying, installation & commissioning at required site of sieve shaker (motorized) for 20cm, diameter (with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), sieve shaker motorised for 30cm dia sieve with bullt-in digital timer (with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying. installation & commissioning at required site of analog silver schmidt concrete test hammer. (proceq)(with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying. installation & commissioning at required site of ring and ball test apparatus (softening point electrically heated semi-automatic digital).(with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying, installation & commissioning at required site of digital hot air oven(with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying. installation & commissioning at required site of ductility testing machine with digital display without cooling (with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying. installation & commissioning at required site of laboratorydigitallaboratory california bearing ratio test apparatus with aimil daq & aimil analysis module, four speed, with gun metal mould assembly cbr test apparatus, (motorized electronic 4 speed with gunmetal mould) without (scada )(with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), automatic modified marshall apparatus, 100kn for 4&6 dia samples with marshal softwareincluding running software as specified in specification as directed by engineer in-charge.(without computer)(with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying, installation & commissioning at required site of kinematic viscosity cannon tube size no.6(with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying, installation & commissioning at required site of absolute viscosity cannon tube size no. 12 (with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), absolute viscosity cannon tube size no. 13. with constant certificate & calibration. (with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying, installation & commissioning at required site of grinder machine (bar cutter).(with yearly calibration certificate for five year

Central Government And Public Sector

CTN :38965763

07 Feb, 2025 NA

Kamega - Arunachal Pradesh

Tender For supply of yaskawa make ac variable speed drive controller module series a1000 18.5 kw 3 ph, 415 v vfd p/n-cimr,yaskawa make ac variable speed drive controller module series v1000 5.5 kw 3 ph, 415 v vfd p/n-cimr-

Central Government/Public Sector

CTN :38922351

20 Jan, 2025 NA

Saran - Bihar

Tender For supply, errection, testing and commissioning of hvls fan with controller and extension cable to controller of 50 m length fan size 08 ft. dia no of blade 06 nos, air volume 95000 cfm power consumpti on 0.40 kw motor torque 80 nm speed 110 rpm maximum (variable from 0 to 90) noise< 40 db in put po wer single phase 230 volt 50 hz, weight 40 kg, motor type direct driven pmsm type outer rotor type magen ts grade n45sh insulation class h control penal mounting wall mounting 4-5 ft. from floor level vfd enclos ure ip 54 power coated steel cabnet compatibility bms compatibility 16, safety certification complete to ce required, make austar,bharat brayan or similar reputed make [ warranty period: 30 months after the da te of delivery ]

Central Government/Public Sector

CTN :38893747

20 Jan, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : tender for supply of electronic components - connector , oculink 8x , receptacle , 1x1 , shielded , ra , smd , connector , usb 3.1 type-a receptacle , 2x1 , shielded , gen-2 , ra , th , connector , rj45 jack with magnetics , 1x1 , shielded , 10/100/1000 baset , led (y , g/o) , ra , th , connector , b2c , male , 2x6 , 2mm , 2a , shrouded , st , th , ic , up , amd epyc 9654 , 96 core , 2.4-3.7ghz , 12-ch ddr5 , pcie 5.0 x128 , lga-6096 , black plate 3.5 stud , ss , natural , 104x92.4x2.5mm , lga-6096p skt sp5 srm assembly , azif0252-p001c , 92x118.9x10.18mm , battery holder , 1775485-2 , coin-20mm , vertical , th , ic , raa229621 , 8-phase svi3 pwm controller , 2.97-3.63vin , 0-3.05vout , digital dual o/p , qfn-40 , ic , raa229620 , 12-phase svi3 pwm controller , 2.97-3.63vin , 0-3.05vout , digital dual o/p , qfn-48 , ic , switcher , 4.5-18vin , 0.8-5.5vout/35a , sync buck conv , pqfn-37 , ic , switcher , 4.5-20vin , 0.3-12vout/25a , 1.5mhz , sync buck dc-dc conv , powerpak mlp34-57 , ic , slg55221 , high voltage gate driver , tdfn-8 , ic , ldo , 1-5.5vin , 0.8-4vout/3a , wdfn-10 , ic , switcher , 4-16vin , 0.6-5.5 vout-16a , 1000 khz , sync buck , qfn-21 , ic , ldo , 6 vin , 1.5 v out/0.15a , sc70-4 , ic , switcher , 4.5-18vin , 0.76-5.5vout/3a , sync buck conv , qfn-16 , ic , fpga , xc7s75 , spartan-7 , fgga-676 , ic , pi3eqx1204-c , 4-ch redriver with linear equalization , 12.5gbps , tqfn-42 , ic , tps259540 , 2.7-18v , efuse with ovp , wson-8 , ic , max6315 , low-power up supervisory reset circuit , cmos , sot143-4 , ic , tps3700 , 18-v window voltage detector for over & under voltage monitoring , wson-6 , ic , pi6cv304 , pcie clock generator , 160mhz , soic-8 , ic , tps2595 , 2.7-18v efuse with ovp , wson-8 , socket , lga-6096 , 0.94mm , 0.81mm , socket sp5 , 1.4a , smd , connector , b2c-pwr , male , (signal 4x5 , hp 1x4/40a , hp 1x4/40a) , 2.54mm , shrouded , ra , th , connector , m.2 pci express , female , 67pos , 0.5mm , m-key , ra , smd , connector , edge card , receptacle , (2x7 signal/28a , 2x6 power/42a) , 2.54mm , shrouded , ra , th , connector , dimm-ddr5 receptacle , 2x144 , 0.85mm , 1a , lock , st , smd , connector , b2c , male , 1x3 , 1.5mm , shrouded , st , smd , connector , mcio-edge card , receptacle , 2x37 , 0.6mm , shrouded , st , smd , connector , edge card , receptacle , signal 2x80/0.3a , power 2x2/10.5a , 0.6mm , shrouded , high speed , multi-trak 16x-power , connector , usb 3.1 type-a receptacle , 1x1 , shielded , gen-2 , st , th , connector , b2c , male , 2x7 , 2mm , 2a , shrouded , lock , st , smd , connector , b2c , male , 2x10 , 1.27mm , semi-shrouded , st , smd , inductor , power , 0.22uh , 10% , 40a , 0.29me , shielded , smd , inductor , power , 1uh , 20% , 11a , 10me , shielded , smd , inductor , power , 0.07uh , 10% , 77a , 0.125me , shielded , smd , inductor , power , 0.15uh , 15% , 82a , 0.105me , shielded , smd , inductor , power , 1.5uh , 20% , 47a , 2.5me , shielded , smd , inductor , power , 0.12uh , 15% , 69a , 0.17me , shielded , smd , inductor , power , 0.1uh , 20% , 16a , 0.12me , unshielded , smd , inductor , power , 50nh , 20% , 53a , 0.09me , unshielded , smd , capacitor , elec , 470uf , 2.5v , 20% , 10.2a , smd , capacitor , elec , 270uf , 16v , 20% , 5.8a , smd , connector , edge card , receptacle , 2x84 , 0.6mm , 1.1a , straddle mount , ra , smd , socket sp5 lga 6096 2u fan-less cpu cooler , ic , isl99390 , sps with current & temperature monitoring , 3-16vin , 90a , 1.25mhz , pwm-3.3v , qfn-39 , ic , switcher , 4-17vin , 0.8-12vout/1.5a , 800khz , sync buck conv , wdfn-8 , connector , b2c , male , 2x9 , 2mm , 2a , shrouded , lock , st , smd , connector , b2c-pwr , male , (power 2x6 , signal 1x12) , 1.5mm , (power 13.5a , signal 1a) , shrouded , st , th , ic , tmp75 , temperature sensor , 2 wire interface , soic-8 , connector , oculink 8x , receptacle , 1x1 , shielded , st , smd , module , power , 40-60vin dc , 12.12vout/108a dc , 1.3kw , non-isolated , base

CTN :38293100

20 Jan, 2025 NA

Kokrajhar - Assam

Tender For corrigendum : supply of thruster front thruster , raspberry pi , nodemcu , thruster lifting thruster , flight controller pixhawk , pressure sensor , battery , power sensor module , drivers for light , operating controller , lights , camera , ethernet cable , ethernet converter , cable accessories , electronic speed controller , fuse , fiber connector , testing pool , light cover , wire and other essentials , measuring mat , flat wire , welding tool , heat shrink

CTN :38653181

20 Jan, 2025 NA

Jalgaon - Maharashtra

Tender For corrigendum : supply of high speed, high accuracy eddy current displacement sensor controller, type= gp-xc10m, supply volt , ultrasonic reflex sensor, pnp, no/nc digital & analog output, type - ums123u035, sensing range - 100 , fork light barrier 10-35 v dc 200 ma pnp with sensitivity adjustmnet pot no/nc selector pot and 3 pi