Latest lead cable scrap Tenders | Government lead cable scrap Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

CTN :38588691

04 Jan, 2025 NA

Chamoli - Uttarakhand

Tender For supply of angle iron post 65 x 65 x 6 mm,support struts ms angle 65 x 65 x 6 mm as per is 2062,construction materials as per tech sanction,ms galvanized chain link fence of sleeve size 100 x 100 mm,ms flat 40 x 5 mm 2100 mm long,ms bars 12 mm dia 3200 mm long,galvanised 2 strand steel barbed wire,heavy duty j clips,synthetic paint,ms screw bolts machine made with with hexagonal or square heads

CTN :38488441

28 Dec, 2024 NA

Leh - Jammu And Kashmir

Tender For supply of chain link mesh fence , angle iron picket , barbed wire , ms flat , plain ms bar for chain link support , construction material , fixing and labour charges

CTN :38473549

27 Dec, 2024 NA

Jammu - Jammu And Kashmir

Tender For supply of maint of aios - a picket , b picket , c picket , d picket , u clip , ms bracket , insulation tape , barbed wire , concertina coil , aluminium wire 14 swg , concertina coil 850 x 18 loupe , concertina coil 850 x 56 loupe , fence post 76 x 3 x 2800 mm , fence post 89 x 2 x 3400 mm , truss support post 3100 mm , truss support post 800 mm , weld mesh panel 2600 x 1000 mm , weld mesh panel 2600 x 800 mm , weld mesh panel 2667 x 800 mm , punched tape , baby concertina coil , binding wire , electric pole , flood light , gi binding wire , iron cage 09 panels , laip , led light pole , mcb 10 amp , mcb 16 amp , mcb 32 amp , ms pole , punched tape spool plastic , punjies , security light , stay insulator , tor pannel , wire 2.5 mm , wire 25 mm 2 core

CTN :38473418

27 Dec, 2024 NA

East Sikkim - Sikkim

Tender For tender for supply of ms angle iron 50 mm x 50 mm x 5 mm , steel barbed wire of 12 swg , wc european type with complete accesories , weighing machine cap 30 kgs , weighing machine cap 50 kgs , led tv size 55 inch , j hook with nut and bitumen washer , dining chair wooden , charpoy bed with ply top 6 feet 6 inch x 3 feet 6 inch , stand / pedestal fan , pipe wrench 36 inch 1200 mm , gi half band 3 inch , solvent cement tube 100 ml , pvc door mat , led ceiling light square 24w , lifting belt 5 ton cap 10 meter length , lifting belt 10 ton cap 8 meter length , tile cutter machine , blade for tile cutter machine , heavy duty plastic wheeled dust bin 70 ltrs cap , pvc tee 4 inch

CTN :38421325

20 Dec, 2024 20.00 Lacs

South Tripura - Tripura

Tender For supply of hardware items- supply of all kinds of hardware items for different construction work under rd satchand division during the year 2024-25 isi marked butt hinges in/c screw-100x58x1.90mm(mowjee/equivalent brand), isi marked butthinges in/c screw -75x47x1.70mm (mowjee/equivalent brand), isi marked butthinges in/c screw -50x37x1.50mm(mowjee/equivalent brand), isi marked door window handle 125mm(heavy quality)in/cscrewanodized steel (mowjee / equivalent brand), isi marked door window handle 125mm(heavy quality)in/cscrewaluminum (mowjee / equivalent brand), isimarkedm.s.slidingdoorbolt-300x16mm(mowjee/equivalent brand), isi marked m.s.sliding door bolt - 250x16mm(mowjee/equivalent brand), isimarkedtowerbolt-barreltype-200x10mm(mowjee/equivalent brand), isimarkedtowerbolt-barreltype-150x10mm(mowjee/equivalent brand), isimarkedtowerbolt-barreltype-100x10mm(mowjee/equivalent brand), hooks & eyes-200 mm long, hooks & eyes-150 mm long, isi marked parliamentary hinges with screw-(125x125x27x2.8)mm(mowjee / equivalent brand), isi marked parliamentary hinges with screw- (75x100x20x2.24)mm(mowjee / equivalent brand), m.s. ring (50mm dia), black iron wire, gi wire (22 swg), coir rope, gi plain sheet (0.3 mm thick), chicken net of 1st category, pvc mosquito net of 1st category, nails-upto 1//long, nails-upto 1// to 2//long, nails-above 2//long, holding down bolt (16 mm), m.s. hold fast, barbed wire (9.38 kg / sqm), giwire(suitable for filter,20mm swg weaves with 4nos per25mm in both direction), hollow square pipe (25 mm x 25 mm) of standard specification., joint bolt 40 mm, joint bolt 25 mm, m.s. fan clamp (16 mm dia), polythene, steel handle cum fixer with necessary fittings for steel window., j hook 6 mm dia fitted to 40 mm dia pipe, j hook 6 mm dia fitted to 32 mm dia pipe, cc jail, ms fan light pivot, iron gumla, velcha, iron bucket, hacksaw blade, hacksaw frame, board pin, dhari mat (1.37m x 1.83 m), gi screw, door lock link( upto 50 mm width / dia), door lock (link)( more than 50 mm width / dia), plain glass (3 mm thick), plain glass (4 mm thick), plain glass (6 mm thick), colouring glass with shade (3 mm thick), colouring glass with shade (4 mm thick), one way colouring glass (3 mm thick), one way colouring glass (4 mm thick), one way colouring glass (5 mm thick), one way colouring glass (6 mm thick), glass panes (frosted) 3mm thick and 25 mm width for tiles fitting., glass panes (frosted) 4mm thick and 25 mm width for tiles fitting.

State Government

CTN :36800624

25 Jul, 2024 1.30 Crore

Nagaur - Rajasthan

Tender For matarial supply for nrega scheme and other - p.p.c., white cement, fine prechiger, rail/gravel, gravel local, ballast stone brick for other than road work, 400mm measurement hand broken sit boids cart 1/11), 400mm stone broken boids cart 1/11, amin stone broken boids cart 12/10/6 tikesher, samyo for road work, 63-40mm stone broken boids cart 1/11, 63-40mm hand broken stone road boil cut 1/11, 90-45mm. hand broken stone aggregate, kori ravish boyce cart 1/6), yevla boids cut 1/6), binding samayi 14-6) (dal cut 1/, brick (22.5117.50 cm), first class (stassi, second class, solin khareja chilai stone, masonry bera (, masonry ratha (chi, baranja soling (for digging work upto 15cm height), baranja soling (for road paving work 23cm height), arch width of sheet 10-12 length 2-3 morai 2.5-357, stone sheet (flaky materia(3-4" thick & length, 1-2" width, sandstina dpc, sl, coping lintel, tand almira et, 250mm thickness upto 25-40mm thickness, upto 40-50mm thickness, upto 2300 sq. cm, polished kota stone one side side, upto 1000 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble stone carving mirror 20mm thick, upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble chips, marble powder, marble stone (rajasthani 20mm thick), upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, stone grate, single pail 100 x 75 mm, double pail 125 x 75 mm., stone pail, upto 1.5 m length, minimum 40mm thick , 1.5 m to 2.40 m length, minimum 50mm thick , 2.4 m to 3.0 m length, minimum 65mm thick , above 3.0 in length, minimum 75mm thick , precast tiles/rocks , glazed su-30x45 cm , verified size-60x60 cm , interlock tiles/b rick/block for road work , cement interlocking block m-30grade, 80mm thick , fittings with local cash. for doors, windows and furniture), others / teak, factory made doors (30 mm thick, solid and single sheet), structural steel, iron (tor steel fo-415/500 for reinforcement, widing via 18 gauge, iron girders, conia iron square green/leaf angle aman, jage wine and 14 quaestrad/34 jani, barbed iron lar size 12 guage wire and 12 guage strad/12, iron mesh (24 gauge, 14 mesh, module gi box, 2 for soil, 3 for module, module base and cover plate, 2 for module, 3 for module, modular swaying in, 15 marked, sp 5/6 ampere, sp 15/16 ampere, modular circuit outlet, marked, 6 pin 15/16 amp, steel fastener 5 mm 75 mm, scb db, 2+2 way, spn, single door, 2-4 in, spn, single door, 2+6 in, spn, single door, gi pipe (medium thickness., 15.00 mm dia, 40.00 mm dia, copper wire 8 swg (4.00 mm dia) (0.117 kya/m), ci/ms cover plate attached to frame with locking arrangement, pvc water tank body cover (as per 15:12701-1989, diesel road roller 8 to 10 ton, tractor (25-40 hp), tractor trolley, tractor water tanker samta 4000 liter weight, cement ket mixer 5-7 cubic feet, pumping set 15 hp, niddle/plate better mm operator, -grinding machine with operator big, motor i.e.), compressor, hydraulic excavater/cb (bucket capacity 0.4cum), scraper, shuttering ply with beam and other material, shuttering ply with batti and other material, shuttering nohe plate with batti and other material

Lead Cable Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government