Latest loading platform Tenders | Government loading platform Tenders

Central Government/Public Sector

CTN :39860905

09 Apr, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of aluminium tiltable (inclined) tower ladder with bucket, paint coated surface finish, rungs materia l- aluminium fluted pipe, reach height- (21-30 foot), ladder open height- (21-26 foot), ladder closed height- (13 -17 foot), bottom width- (18-25 inch), platform size- 16x19 inch, number of steps- (11-20), no. of wheels- 4, whe el diameter- (250-270 mm), rubber casted wheel, railing height- (3-4 foot), minimum load capacity- (120-150 k g), , warranty 01 year, availability of test report from central govt/nabl/ilac accredited lab to prove conformity to specification. make - relads tower ladder or equivalent. [ warranty period: 12 months after the date of del ivery ]

Central Government/Public Sector

CTN :39849586

15 Apr, 2025 57.97 Lacs

Bhatgaon - Chhattisgarh

Tender For temporary extension of discharge platform with additional column support structure along with walkway of tb-1 belt conveyor without interfering the original structures of surface bunkers required for discharging transported coal at concrete floor new

State Government

CTN :39862861

07 Apr, 2025 2.08 Lacs

Parganas - West Bengal

Tender For annual maintenance of street tap, tap line, platform and surface drain in ward no. 19 under borough iii of bidhannagar municipal corporation . for one year (365 days)

State Government

CTN :39862864

07 Apr, 2025 2.08 Lacs

Parganas - West Bengal

Tender For annual maintenance of street tap, tap line, platform and surface drain in ward no. 17 under borough iii of bidhannagar municipal corporation . for one year (365 days)

State Government

CTN :39862885

07 Apr, 2025 2.54 Lacs

Parganas - West Bengal

Tender For annual maintenance of street tap, tap line, platform and surface drain in ward no. 21 under borough iv of bidhannagar municipal corporation . for one year (365 days)

State Government

CTN :39862902

07 Apr, 2025 2.08 Lacs

Parganas - West Bengal

Tender For annual maintenance of street tap, tap line, platform and surface drain in ward no. 20 under borough iv of bidhannagar municipal corporation . for one year (365 days)

State Government

CTN :39862937

07 Apr, 2025 2.08 Lacs

Parganas - West Bengal

Tender For annual maintenance of street tap, tap line, platform and surface drain in ward no. 16 under borough iii of bidhannagar municipal corporation . for one year (365 days)

CTN :39841423

21 Apr, 2025 36.50 Lacs

Panchkula - Haryana

Tender For disposal of list comprising of items from sr. no. 1 to 437 (single lot of 437 items) - the assistant director (tech.), govt. industrial dev centre for tool and dies and anodizing, jagadhari - hmt horizontal milling m/c, model fn2h with tool/ acc., roll grinding machine with tool/ accessories and two additional panels:- i) (bch make 4.8 kw dated 28-01-83) ii) (bch make 22 kw dated 28-06-83), i) r. s joist ii) wire rope type electrical hoist wire rope (fitted in hoist), i) hmt drill machine with accessories ii.) bench drill machine stand (m.s. angle ), i) gen set 48kw/60kva with acc. batteries, ii) heavy duty pedestal grinder gd-i with acc., bench grinder, jig boring machine with acc., universal measuring machine no.828 with acc., hmt universal cylindrical grinding m/c g-22 with acc., i) hmt heavy duty centre lathe m/c, model l- 45 with cutting tools/ acc. ii) electric hoist cap. 7.5 ton with platform 6.1x22 mtrs, fired furnace (53x36) with acc. [thermocouple, thermocouple, temperature indicator (digital)], i) pilot self raising portable genty crane stand cap. 5 m. ton without hoist ii) m.s garder/m.s plate & angle(fitted in genty crane stand) iii) electric hoist iv) wire rope with clamp (fitted in hoist) v) spur gear crane vi) trolley (overhead) vii) chain(fitted in crane), wire ropes( scrap), milling cutters (scrap), spanner set, loose spanner, surface block (marking block), nose plier, plier, universal protector combination set, file flat 10, steel almirah 50x30x17, type writer, vernier caliper 15cm, ms rack, rack, dp cutter 12dp no.7, toolkit consisting of 100mm dia cutter with arbor cutter 63mm, file flat 8, handle file wooden, pipe die with handle, pipe wrench, steel almirah78x40x21, steel rule12, oil cane, round die3/8 (broken), drill chuck with arbor, slitting saw cutter, tool holder 1/2", dog carrier 1, dog carrier, drill sleave, plier, bench vice, round die 5/8 (broken), circular table 400mm, spanner set, loose spanner, dial indicator, stand magnetic, digit micrometer 25-50mm code no. 193-102, file 10 with handle, m.s rack, carbide tipped centre, file, oil cane, file6, file, oil cane, tap set 3/8 (broken), drill chuck and drill chuck arbor, dog carrier 11/2, loose spanner, revolving centre, surface gauge (used) (marking block), outside inside caliper, m.s rack, flat file, flat file8, file 12, spanner set, try square, empty drums, steel almirah 78x40x21, screw driver 10, soldering iron, plier, pad lock, dial test indicator, dial test indicator, magnet stand- 7012 ii) pneumatic stand - 7015, pocket calculator, m.s rack, file8, digit micrometer 50-75mm, drill chuck, drill stand, steel tool cabinet765x435x1170mm, bench vice, digit micrometer 0-25mm code no.193-101, vernier 6-150mm, carbide tipped centre, bench vice 6, carbide tipped centre, hand reamer 20mm, table lamp, end mill 22mm, end mill 20mm, depth micrometer 0-50 mm, empty cylinder (15kg), thickness gauge code 184-103, dial indicator, outside micrometer with dial indicator (25-50mm), tap set (broken), drill 4mm (broken), metric measuring tape, dial caliper 150mm, pitte space master traveling trolley with drafting chair, aristo calculator, flat file 12, chain pulley block (trolly) cap. 5ton with r.s joist, steel rule12, lock, hacksaw frame 12, drill 7mm, digit micrometer 75-100mm code193-104, vernier caliper6, m.s rack, wolf precision tool post grinder with internal grinding attachment, revolving centre, outside inside compass, plier, steel rule24, shell end mill 40x16x32, tool cabinet 765x435x1170mm, drill chuck, vernier caliper6-150mm, drill 5/16, wall clock, wall clock, steel tool cabinet, library table 8x4x21/2, equal angle cutter 80x20x22mm 600, equal angle cutter 63x16x22mm, end mill 22mm, pad lock, g plate, i) optical comparator pj-250 with acc. ii) tool maker microscope, dial indicator, end mill 20mm, outside micrometer 100-125mm, convex cutter 63x8x22mm, orpat calculator, out side micrometer 0-25mm, flat file 10, screw driver, heater, i) vernier callipe

CTN :39826848

08 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For clean room (d block - iitm rp) - partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-50 mm thick ppgi/ ppgi wall panel for coloumn, partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-100 mm thick ppgi/ ppgi wall panel for coloumn, wall paneling of ppgi/ppgi of 100 mm thick with 40 mm of glass wool panel, desnity 100kg.m3, non combustable, penling color as per architect choice. with necessary double door of equal size as per site condition. fittings complete all. panel of three side with roof necessary duct cut otu with proper seal to be done as per site for sound insulation., panel thickness : 100 mm ppgi/ppgi wall raiser ( 700 width x depth less than 80 mm), walkable ceiling panels ppgi/ppgi -double skin modular clean room walkable ceiling panels made with 0.6 mm pre coated sheets on both side with puf as infill of density of 40 2 kgs/m3. -50 mm thick ppgi/ ppgi ceiling panels, cleanroom doors -50mm thick flush frame made of 1.2 mm thick gpsp powder coated sheet, 0.8 mm thick pu powder coated gpsp sheet with honey comb kraft paper as infill of 46mm thk shutter suitable for 50mm thk frame, including all the accessories like double glazed veiw glass, hardwares like push plate, kick plate, non concealed door closure. ss d handle, ss ball bearing butt hinges, both side key operated lock & key. concealed drop seal per leaf and concealed flushbolt for double leaf door etc.- single leaf door - size 1000 x2100 mm, double leaf door size 1800mm x 2100 mm, double leaf door size 2000mm x 2100 mm, view panels -double glazed view 5 mm toughned glass with flush design, 50 mm thick flush view panel made of 1 mm thick gi frame with puf as infill in- between the frame., coving & corners -male & female r-70 powder coated coving, 2d / 3d internal powder coated corner coves, external 90 degree powder coated coving, bottom track for panel, silicon sealent for panel to panel joint, supply, installation of air shower- microflow make mfd-as -1200 model. inner dimension- 900x1220x1950 (h), over dimension of -1800x1320x2200(h), cabinet, platform stainless steel-304, of 1 person capacity, gi powder coated with flush double glazing , hardware like door closure, d handle, ball bearing butt hinches door with vision panel, pre filter - flange type of 90% efficiency, pressure drop -6 to 8 mm, hepa filter box type, 00.007 % efficiency, pressure drop of 25 mm of w.c, adjustablke nozzle of 30mm, as per manufacuter specification , control motor by dol starter, doors by electronmahnectic inter locking, overload protection, thermal relay,emergency off- push button. complete all. consider micro flow, design , supply, providing of esd mat flooring of homogeneous composition with block conductive layer sandwhich between two antistatic layers. of bs 2050 /1978is 3462 /1986 governing specification. thickness of the materials 2 mm +/-0.1mm( 0.5mm sandwhich conductive layer), electrical propertie : surface resistivity 108 -1010ohms/sq. decay time: less than 2 seconds. including copper strip below mat to connec the earth bus complete all. with an thermo welding process complete all., panels as per technical specifications & schematic diagram., supply, installation, testing and commissioning of indoor type lt switchboards, floor mounting type, bottom/top entry. refer enclosed sld. enclosure: compartmentalized single front crca (cold rolled cold annealed sheet steel) doors:2mm body:2mm gland:3mm covers and partitions:1.6mm ip class for indoor/ip55 with weather proof enclosure for outdoor bus bars: electrolytic grade conductivity as per standard is 5082 bus bar material: as per sld bus bar joints: shroude

CTN :39832256

08 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For tender for clean room - partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-50 mm thick ppgi/ ppgi wall panel for coloumn, partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-100 mm thick ppgi/ ppgi wall panel for coloumn, wall paneling of ppgi/ppgi of 100 mm thick with 40 mm of glass wool panel, desnity 100kg.m3, non combustable, penling color as per architect choice. with necessary double door of equal size as per site condition. fittings complete all. panel of three side with roof necessary duct cut otu with proper seal to be done as per site for sound insulation., panel thickness : 100 mm ppgi/ppgi wall raiser ( 700 width x depth less than 80 mm), walkable ceiling panels ppgi/ppgi -double skin modular clean room walkable ceiling panels made with 0.6 mm pre coated sheets on both side with puf as infill of density of 40 2 kgs/m3. -50 mm thick ppgi/ ppgi ceiling panels, cleanroom doors -50mm thick flush frame made of 1.2 mm thick gpsp powder coated sheet, 0.8 mm thick pu powder coated gpsp sheet with honey comb kraft paper as infill of 46mm thk shutter suitable for 50mm thk frame, including all the accessories like double glazed veiw glass, hardwares like push plate, kick plate, non concealed door closure. ss d handle, ss ball bearing butt hinges, both side key operated lock & key. concealed drop seal per leaf and concealed flushbolt for double leaf door etc.- single leaf door - size 1000 x2100 mm, double leaf door size 1800mm x 2100 mm, double leaf door size 2000mm x 2100 mm, view panels -double glazed view 5 mm toughned glass with flush design, 50 mm thick flush view panel made of 1 mm thick gi frame with puf as infill in- between the frame., coving & corners -male & female r-70 powder coated coving, 2d / 3d internal powder coated corner coves, external 90 degree powder coated coving, bottom track for panel, silicon sealent for panel to panel joint, supply, installation of air shower- microflow make mfd-as -1200 model. inner dimension- 900x1220x1950 (h), over dimension of -1800x1320x2200(h), cabinet, platform stainless steel-304, of 1 person capacity, gi powder coated with flush double glazing , hardware like door closure, d handle, ball bearing butt hinches door with vision panel, pre filter - flange type of 90% efficiency, pressure drop -6 to 8 mm, hepa filter box type, 00.007 % efficiency, pressure drop of 25 mm of w.c, adjustablke nozzle of 30mm, as per manufacuter specification , control motor by dol starter, doors by electronmahnectic inter locking, overload protection, thermal relay,emergency off- push button. complete all. consider micro flow, design , supply, providing of esd mat flooring of homogeneous composition with block conductive layer sandwhich between two antistatic layers. of bs 2050 /1978is 3462 /1986 governing specification. thickness of the materials 2 mm +/-0.1mm( 0.5mm sandwhich conductive layer), electrical propertie : surface resistivity 108 -1010ohms/sq. decay time: less than 2 seconds. including copper strip below mat to connec the earth bus complete all. with an thermo welding process complete all., panels as per technical specifications & schematic diagram., supply, installation, testing and commissioning of indoor type lt switchboards, floor mounting type, bottom/top entry. refer enclosed sld. enclosure: compartmentalized single front crca (cold rolled cold annealed sheet steel) doors:2mm body:2mm gland:3mm covers and partitions:1.6mm ip class for indoor/ip55 with weather proof enclosure for outdoor bus bars: electrolytic grade conductivity as per standard is 5082 bus bar material: as per sld bus bar joints: shrouded/tinned

Loading Platform Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government

State Government

State Government