Latest locking Tenders | Government locking Tenders

CTN :43068422

15 Dec, 2025 NA

Parganas - West Bengal

Tender For supply of liver slide locking (through mim route) for pistol auto 9mm

CTN :43068463

15 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of replacement of door hinges(qty 02 for each db) , replacement of lm (ebonite) sheet (size lb- 30 cm x 30 cm) , replacement of indication lamp(qty 03 for each db) , replacement of push button (qty - 02 for each db) , replacement of mcbs (mcns provide by ss 14 qty mcbs for each db) , replacement of internal cabling (2x1. 5 sqmm length per db 1. 5 mtr) , internal cleaning of db ( size ldb- 40cm x 37cm x 19. 5cm) , painting of db ( size ldb- 40cm x 37cm x 19. 5cm) , replacement of locking nut ( qty - 02 for each db)

CTN :43073167

26 Dec, 2025 55.00 Lacs

Fatehpur-Up - Uttar Pradesh

Tender For providing of design installation and maintenance of educational lab - vocational lab; supply and installation of hardware; buyer - waste oil tray , hydraulic jack , hand gloves , hand gloves , engine oil bike, air filter , fuel filter , grease, funnel , hand wash , two washing kit , first aid kit , petrol , oil can , double ended open spanner set , close ended spanner set , screwdriver set , air compresser , multimeter , hydrometer , tyre pressure gauge , battery testing equipment , gear pullers , repair tools kit , plier set, plier, monkey plier, outer and inner plier, hammer , allen key set , tappet puller, tappet gauge, socket spanner goti, toolbox , tools trolley , magnetic tool bar , ruler , fuel pump , ear plugs , spark plugs , glow plugs , wiper blades , brake pads , clamp meter , wiring harness , si engine module , ci engine module , grease gun, air compressor , bench vice , work tables , bench grinder , oil draining and filling equipment , cooling system tester , multimeter, hydrometer , dc clamp meter , battery testing equipment , pneumatic tools , torque wrenchs, car seat covers , steering covers , gear nob covers , fender covers , hard toed boots , sunglasses , bump caps , vehicle safety stands, parts washing station car , gear pullers , sliding hammer pullar set , ratchet and socket set , oil filter wrench , oil drip pan, rubber mallet, breaker bar drive , air wrench , iron almirah , alternator, apron , arbour press , battery charger equipment , bore gauge , toolbox , oil filter , radiator , micrometers , measuring tape , spanner box , tool board , front and service tool kit , tyre pressure gauge , wall charts of lubricants , wall charts , petrol engine old , fuel pump , fuel filter , feeler gauge , gearbox , spark plug cleaner and tester , propeller shaft, starter motor bike, lubricant car, clutch system , differential , steel rule, steering system , oil squrit can, plastic container , mpfi pump , petrol , grease gun , grease, speaker , magnetic stand for dial gauge , engine compression tester , vernier caliper , old two wheeler, air conditioner , adjustable lights , barcode scanner and printer , calculator , card swiping machine pos , carry bag , cash counting machine , cash drawer, cctv cameras, computer chairs , chalan book with delivery challans, clipper hangers, desktop computer , computer table , coupon and vouchers, credit card model debit card model, credit notes , currency notes of different denomination dummy, customer feedback form , daily log book , danglers , demo counter , display tool kit , display photograph of different type of products categories of recent retail industry to fit into , display boards standees different types, dummy products with barcode , dummy billing software , dummy stock transfer note invoice , dustbin , fire alarm , seize fire extinguisher , first aid box , flip chart holder , flip chart holder , gift wrapping paper , glow in dark signages, gondolas, gun tag with tagging gun, hanger , hanger stand , housekeeping equipment on site , labelling machine , ladder , lcd tv , lead register , shopping cart , locking system , loyalty ki enrollment form , mannequins , neck lock for carry bags , offer policy signages, pallets , paper boards, paper pins , peg hooks , personal protective equipments , photograph for stacked notes , physical bill copy , posters , projector, projector screen , public address system microphone , punching machine , purchase book indent book , receving register, safety sign board , security tags and remover , shopping basket , stationery items kit , iron almirah , stock counter register , stool molded with steel base , store directory directional signage , uv light fake note detective machine, vacuum cleaner , weighing machine , writing board with white board marker and duster , electronic payment option signage, display photographs of different type of products categories of recent retail industry to fit into 1.5 , ups , theft alarm, desktop computer, printe

CTN :42921454

08 Dec, 2025 NA

Jalandhar - Punjab

Tender For bid to ras supply of lv7-stln 10333494 f-4930313 5310-174994 locking ring , lv7-maruti 10441547 37820m70f00 switch assy oil pressure , lv7-stln 10337185 p-3706845 terminal , lv7-tata 10482090 2641-8910-6311 mud flap outer rh wheels , lv7-t-815 10347299 121-222-365-350 bulb 24v,55-50w, p 45 t , lv7-stln 10338582 f7x00200 fuse 10 amp , lv7-maruti 10456191 09814m00009 open spanner 14 x 17 , lv7-stln 10339780 f-7478500 starter switch , lv7-maruti 10454086 17431m60a20 gasket water pump , lv7-tata 10484906 2527-50108243 assy pressure valve cap 14psi , lv7-maruti 10440619 78471m79000-5es bezel handle rh , lv7maruti 10453297 09481m10102 fuse 10 amp , lv7maruti 10455237 11349-60a01 gasket oil seal housing , lv6-mt1 10548111 4730-000163 clamp hose size22for hose 16to22mm od , lv7-maruti 10460488 41411m75m10 u bolt front spring rh

CTN :43047862

17 Dec, 2025 NA

Umaria - Madhya Pradesh

Tender For supply of implants - supply of implants, d.h.s. plate long barrel & short barrel with round holes 125 , 130 , 135 , 140 angle; 3-6, holes ( cortical screw 4.5mm & dhs screw ), d.h.s. plate long barrel & short barrel with round holes 125 , 130 , 135 , 140 angle; 7-18 holes (cortical screw 4.5mm & dhs screw), d.h.s. plate long barrel & short barrel with d.c. holes 125 , 130 , 135 , 140 angle; 3-6 holes (cortical screw 4.5mm & dhs screw), d.h.s. plate long barrel & short barrel with d.c. holes 125 , 130 , 135 , 140 angle; 7-18 holes (cortical screw 4.5mm & dhs screw), d.h.s plate long barrel and short barrel with l.c. hole 125 , 130 , 135 , 140 ; 3-18 hole., note:- dhs instrumentation set with box ,, pediatric d.h.s.1250,1300, 1350,1400 angle;round hole plates 3-8, (cortical screw 4.5mm & dhs screw ), note:- pediatric d.h.s. instrumentation set with box, d.c.s plate (950) with round holes 4 -8, holes (cortical screw 4.5mm & dhs screw & cancellous screw ), d.c.s plate (950) with round holes 9-20, holes (cortical screw 4.5mm & dhs screw & cancellous screw ), d.c.s plate (950) with d c holes 4-8, holes (cortical screw 4.5mm & dhs screw & cancellous screw ), d.c.s plate (950) with d c holes 9-20, holes (cortical screw 4.5mm & dhs screw & cancellous screw ), d.c.s plate long barrel and short barrel with l.c. hole 125 , 130 , 135 , 140 ; 3-18 hole., note:- d.c.s. instrumentation set with box, trochanteric stabilisation plate and screw (125 , 130 , 135 , 140 ; 2-18 hole)with round hole, trochanteric stabilisation locking plate and screw and dc hole (125 , 130 , 135 , 140 ; 2-18 hole), contoured locking plate for fracture shaft femur (right & left) with screw 5mm(broad l.c.p), contoured locking plate for distal end femur (right & left) with screw 3-20 hole., medial & lateral proximal tibial buttress locking plate (t- & l- shape) with screw, hockey plate for tibia (right & left) with screw (4-17hole), hockey locking plate for tibia (right & left) with screw (4-17 hole), contoured medial/ antero-lateral locking plate for lower end tibia with screw (4-20 hole), clover leaf plate with screw (3-20hole), cobra head plate with screw (3-20 hole), hook plate with screw (3-20 hole), proximal humerus locking plate (philos plate) with screw (3-12 hole), contoured locking plate for distal end humerus. with screw (medial,lateral ,posterolateral for right and left side; 3-12 hole), calcaneal plate., calcaneal locking plates., clavicle locking plates.(pre contoured :5-12 hole for right and left), allis plate/ contoured plate for distal end radius with screw (2-12 hole) right and left ., locking elise plate/ contoured locking plate for distal end radius with screw 2-12 hole right and left side ., h-plate. with screw, y- plate. with screw, universal lower end tibia locking plate with screw (3-12 hole), d.c.p. narrow. with cortical screw (4-20 hole), d.c.p. broad. with cortical screw (4-20 hole), small d.c.p. plates with cortical screw (4-20 hole), small d.c.p. locking plates with cortical screw (4-20 hole), lcdcp 3.5mm (4-20 hole), lcdcp 4.5mm (4-20 hole), 1/3 rd tubular plates 3.5mm. with cortical screw (3-14 hole), reconstuction plates 3.5mm.with cortical screw(3-14 hole), reconstuction plates 4.5mm. with cortical screw(3-14 hole), reconstuction locking plates 3.5mm. with only locking screw (3-20 hole), reconstuction locking plates 4.5mm. with only locking screw (3-20 hole), pelvic spring plate, pelvic curved plate, pelvic streight plate, pelvic symphyeal plate, proximal tibia raft plates (4-20 hole), extra articular distal humerus plates (4-20 hole) for right and left, olecranon plates 3-12 hole., lateral distal fibula plates locking , precontoured 4-12 hole., fully threaded cannulatedcancellous screws 4mm. 25, 30 .115 mm, in 5 mm increment., 16 mm threaded cannulatedcancellous screws 4 mm., fully threaded cannulatedcancellous screws 6.5 mm 25, 30, .115 mm, in 5

corporations/Associations/Others

CTN :43082760

16 Dec, 2025 28.72 Lacs

Jodhpur - Rajasthan

Tender For fibre glass 3 section telescopic operating rod with earthing conductor (lead) and continuous pole height adjustment, locking mechanism having total extension length of 6 meters

Central Government/Public Sector

CTN :43083523

15 Dec, 2025 NA

Udupi - Karnataka

Tender For fitment of grain bulkhead locking pins for uy.168-170

CTN :43084979

12 Dec, 2025 2.00 Lacs

Kanchipuram - Tamil Nadu

Tender For providing inter locking paver block road to amayampattu ponniyamman koil street cross thalapathi mk stalin street at manamathy panchayat at thiruporur panchayat union in chengalpattu district for the year 2025-26 having package no . 3/2025-26 sch

State Government

CTN :43061677

12 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of (e/m) equipments of various tube wells installed at babu park kotla area under kasturba nagar constituency ac-42 . - s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable.make: - tata/jindal, supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long) make: finolex / havells./kei/any djb approved make., s/o nut bolts,washer dia 1 long full threaded, s/o rubber packing 50 mm dia. flange., lowering and lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material (rubber packing and nuts bolts) will be arranged by the firm as per site requirement. the other material required during execution will be provided by department.

CTN :43063914

15 Dec, 2025 24.96 Lacs

Todaraisingh - Rajasthan

Tender For nayabas inter locking tiles and nali

Locking Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government