Latest locking Tenders | Government locking Tenders

corporations/Associations/Others

CTN :39588418

18 Mar, 2025 5.63 Lacs

Bharuch - Gujarat

Tender For providing and fixing pre-cast inter locking paver block on one side of road near plot no. 153 at notified area, gidc, bharuch industrial estate.

CTN :39360437

20 Mar, 2025 NA

Shimla - Himachal Pradesh

Tender For corrigendum : eoi/tender for the procurement of artificial appliances / implants for orthopedics procedures for igmch shimla - proximal femur fracture :- proximal femoral nail (pfn) (all sizes: short/ long), proximal femur fracture :- pfna-2, proximal femur fracture :- proximal femoral integrated screw & nail system-intertan nail (all sizes: short/ long), proximal femur fracture:- reconstruction nail (trochanter entry) with radius of curvature 1.5 meter and 1 meter. proximal diameter 13 mm to 14 mm recon screw diameter 6.5 mm) , proximal femur fracture :- dhs 130-150 degree dhs plate with srews (short barrel 25mm and long barrel 38mm), proximal femur fracture :-dcs 95 degree dcs with screw , proximal femur fracture :- proximal femoral hook plate, proximal femur fracture :- proximal femoral locking plate with screws, proximal femur fracture :- angled blade plate 95, 120, 135 degree with instrumentation, proximal femur fracture :- double angled blade plate 95, 120, 135 degree with instrumentation, proximal femur fracture :- trochanter stabilisation plate with instrumentation, proximal femur plate:- for periprosthetic fracture with clamp and cable system all sizes with complete instrumentation, femoral neck fracure :- ptcs 4.5mm & 6.5/ 7mm with washers (spherical/ hemispherical), femoral neck fracure :- femoral neck system all sizes with complete instrumemntation, shaft fracture femur :- reconstruction nail ( trochanter entry) with radius of curvature 1.5 meter and 1 meter. proximal diameter 13 mm to 14 mm recon screw diameter 6.5 mm) , shaft fracture femur:- interlocking nail trochanteric entry angulation 4-6 degree (curved and short zig attachment), shaft fracture femur:- interlocking nail piriform fossa entry straight nail (curved and short zig attachment) , shaft fracture femur:- antibiotic coated nails ( specifications as sr. no. 9,10,11), femur plating: broad lcp, distal femur plating: peri prosthetic plates with cables, tfna/trochanteric fixation nail advance: all sizes with complete instrumentation, distal femur fracture: distal femoral nail multi lock, distal femur fracture: distal femoral locking plates ( steel/ titanium separately) anatomically curved , 5 hole to 19 holes, side specific, 4.5 cortical/ 5mm locking screw , distal femur fracture: distal femoral locking plates ( steel/ titanium separately) anatomically curved , 5 hole to 19 holes, side specific, 4.5 cortical/ 5mm locking screw with less invasive stabilisation system ( liss), distal femur fracture: distal femoral medial locking plate 4 hole (4.5/5mm), proximal tibial fracture: supra patellar nailing multi lock option (diameter 8mm to 13mm "with increment of 0.5mm diameter", length 25.5cm to 46.5cm)., proximal tibial fracture: expert tibial nail (diameter 8mm to 13mm "with increment of 0.5mm diameter", length 25.5cm to 46.5cm)., proximal tibial fracture: expert tibial nail solid ( diameter 8 mm to 10 mm, length 25.5cm to 46.5cm), proximal tibial fracture: proximal lateral tibial locking plate ao type 4.5 mm, proximal tibial fracture: proximal lateral tibial locking plate 3.5 mm "l-type", proximal tibial fracture: proximal medial tibial locking plate t -type 3.5 mm, proximal tibial fracture: proximal posteromedial locking tibial plate 3.5 mm, tibial shaft fracture: iln (diameter 8mm to 13mm "with increment of 0.5mm diameter", length 25.5cm to 46.5cm)., tibial shaft fracture: iln solid ( diameter 8 mm to 10 mm, length 25.5 cm to 46.5cm), tibial shaft fracture: narrow lcp 4.5 mm, tibial nail in infection/ nonunion: antibiotic coated nails, distal tibia: medial distal tibial locking plate 3.5 mm, distal tibia: distal tibial clover leaf locking plate 3.5 mm side specific), distal tibia: anterolateral distal tibial locking plate 3.5 mm, distal tibia: metaphysieal locking plate 3.5 mm, distal fibular locking plate: 2.7 mm plate system, distal fibular winged plate: 3.5 mm plate system, distal fibular hook plate: 3.5 mm plate system, hind foot fusion: hind fo

Central Government/Public Sector

CTN :39576064

17 Mar, 2025 75.3 Thousand

Dhanbad - Jharkhand

Tender For complete repairing of leveling jack pad ball assembly making two nos. and its jack pad making two nos. with ht pin and locking arrangement in drill sl. no. dr-242 at nichitpur ocp, sijua area.

Central Government/Public Sector

CTN :39588564

19 Mar, 2025 NA

Solapur - Maharashtra

Tender For supply of needle holding forceps, medium, locking , imported, straight design

CTN :39574538

17 Mar, 2025 NA

Mumbai - Maharashtra

Tender For supply of locking compression plates (v2) (q2)

corporations/Associations/Others

CTN :39597470

19 Mar, 2025 1.40 Crore

Mumbai - Maharashtra

Tender For high tensile galanized bolt and self locking nut

CTN :39555984

25 Mar, 2025 NA

Jaisalmer - Rajasthan

Tender For supply of procurement of barrack and road items - wire mesh 4 ft wide , gm gate valve 20mm dia isi mark , gm gate valve 25mm dia isi mark , grating round ss floor drain trap 5 inch 127mm , grating round ss floor drain trap 5 inch 127mm with waste hole , helical door spring 150 mm , hexa blade 1 inch double side , holding bracket 600mm long for whb 24 inch , hydraulic door closer classic 90 degree universal , pvc internal kit for flush cistern with dual flush , pvc internal kit for flushing cistern single flush , looking mirror 450 x 600x 6 mm with aluminum or pvc frame , ms butt hinges 100 mm , ms handle for window , nails size 1 inch and 2 inch no 14 , cp peg set of 06 , pvc angle cock 15 mm , pvc angle cock 15 mm two way , pvc ball cock 15 mm with ball and rod , pvc ball cock 20 mm with ball and rod , pvc ball cock 25 mm with ball and rod , pvc bib cock 15 mm , pvc connection 15 x 450 mm , pvc connection 15 x 600 mm , pvc flushing cistern 10 ltr cap , pvc health faucet with tube 1 point 5 mtr and hook , pvc jet spray with 1 point 5mtrs connecting tube , pvc overhead shower round 3 inch , pvc pillar cock 15 mm , pvc pillar cock 15 mm swan neck , pvc pipe 80mm dia 3 mtr long , pvc rawl plug 50 mm and 8mm dia , pvc sheet white 8 feet x4 feet x6mm , pvc stop cock 15 mm , pvc tank cover lid white , pvc toilet seat cover for ewc, , pvc urinal waste pipe 45mm dia , pvc waste coupling 32mm dia full threaded , pvc waste pipe 32 mm , rubber beading 75mm wide 25mm , sink without drainge board made of ss 1mm thick for kitchen size 915 x 460mm , sink with drainage board made of ss 1mm thick for kitchen with plugs overall size 915 x 460mm bowl size 410mm x 330x160mm , sliding bolt handle 300mm , cp soap dish holder , solvant tube 20ml , ss curtain support set , ss handle 100mm with machine screw , stainless steel kitchen sink coupling 114mm , gi tank connection nipple 25mm , gi tank nipple 20mm , teflon tape 20 to 40mm width 21 to 30m long , tower bolt aluminum 100 mm , tower bolt aluminum 150 mm , wall putty powder asian paints , wash hand basin 46 x 33 cm , water storage tank 1000 ltr cap dl , water storage tank 500 ltr cap dl , white cement

CTN :39562483

25 Mar, 2025 NA

Sirohi - Rajasthan

Tender For supply of barrack and road or electric and mechanic items - cp wall mixer 3 in 1 with provision for overhead and hand shower and 190mm long bend pipe , glass corner shelf for bathroom or transparent bathroom shelf for wall glass or bathroom corner organizer 9x9 inch pack of 3 , multi purpose wall hung transparent glass shelf for bathroom 18x6 inch pack of 1 , pvc angle holder bulb 240v , fan capacitor 2 point 5 mfd 52mm length 27mm dia , bakelite fancy angle holder for electric fitting , tube light 2 feet led 20w , pluto flat ultra modern light 600x600 mm 36 watts , led t l fitting 20w 4 ft aluminum housing , three phase digital electronic meter capacity upto 60 amp , flame proof switch upto 15amp , calcium hypochloride grannule , gi union 25 mm , gi union 40mm , gi union 50 mm , gi union 65 mm , gi union 80mm , three phase dol star delta pump starter 7 point 5 hp , three phase dol star delta pump starter 10 hp , contactor 250 amp 4 pole , flood light led 150w ip 66 color warm white , mccb 4 pole 250a , can type power factor capacitor 3ph 5 kvar , can type power factor capacitor 3ph 10 kvar , can type power factor capacitor 3ph 12 point 5 kvar , can type power factor capacitor 3ph 15 kvar , mccb 63a 4 pole 36ka , aluminum cable lugs 120 sqmm , aluminum cable lugs 150sqmm , aluminum cable lugs 185 sqmm , aluminum cable lugs 400 sqmm , aluminum cable lugs 300 sqmm , aluminum cable lugs 50 sqmm , aluminum cable lugs 35 sqmm , aluminum cable 35 sqmm 3 point 5 core , heating element 2kw brass type , screw fastener 10mm , metal clad box for geyser with 15 amp mcb , thermostat 250v for geyser brass type , pipe 24 inch hot and cold type for geyser , plug top with connection wire for geyser 3 core multi standard , 4 sqmm wire copper

State Government

CTN :39554654

25 Mar, 2025 29.94 Lacs

Delhi - Delhi

Tender For supply of shock dosing - removal of odour, algae, reduction of bod, cod, tss, ph value nitrates, phosphates, up to the parameters as described in the objective of the work by biological treatment by way of bio-remediation using pond & lake cleaner or other equivalent product in solid or liquid form as per manufacturers specification and direction to support life without disrupting the aqua ecology, and to meet the standards of the lake prescribed by is 2296 class d as required for propogation of wild life and fisheries, with further objectives to eradicate all harmful foul smell, mosquito colonies, aquatic weeds, algae etc. at suitable points in the lake i/c removal of floating plant & other material like empty bottles, dead leaves/trees, polythene bags etc. from the lake by fibre boat and clearing the grass from bank/beams around the lake, all complete as per the direction of engineer-in-charge this includes the cost of product, labour and equipment needed for treatment. this product should be non pathogenic, non-hazardous and shall not have any adverse effect on agriculture, aquatic culture, humans, animals and to the environment. the necessary labour shall be deployed to complete all operation such as spraying and dosing, removal of floating plants and other material like trash, empty bottles, dead leaves/tree branches, polythene bags, removal of bio sludge/solids generated during treatment, dredging etc. from the lake/water body. note-1.shock dose (for 10 days) 2. rate shall be inclusive of cost of dosing material, one lab test per month, t&p for dosing / spraying, cleaning of the lake, safely arrangment and adequate manpower required to carry out all the activities. , regular maintenance dosing - removal of odour, algae, reduction of bod, cod, tss, ph value nitrates, phosphates, up to the parameters as described in the objective of the work by biological treatment by way of bio-remediation using pond & lake cleaner or other equivalent product in solid or liquid form as per manufacturers specification and direction to support life without disrupting the aqua ecology, and to meet the standards of the lake prescribed by is 2296 class d as required for propogation of wild life and fisheries, with further objectives to eradicate all harmful foul smell, mosquito colonies, aquatic weeds, algae etc. at suitable points in the lake i/c removal of floating plant & other material like empty bottles, dead leaves/trees, polythene bags etc. from the lake by fibre boat and clearing the grass from bank/beams around the lake, all complete as per the direction of engineer-in-charge this includes the cost of product, labour and equipment needed for treatment. this product should be non pathogenic, non-hazardous and shall not have any adverse effect on agriculture, aquatic culture, humans, animals and to the environment. the necessary labour shall be deployed to complete all operation such as spraying and dosing, removal of floating plants and other material like trash, empty bottles, dead leaves/tree branches , polythene bags, removal of bio sludge/solids generated during treatment, dredging etc. from the lake/water body. note - rate shall be inclusive of cost of dosing material, one lab test per month, t&p for dosing/spraying, cleaning of the lake, safely arrangment and adequate manpower required to carry out all the activities. , providing and placing polyethylene water storage tank, is 12701 marked, with cover and suitable locking arrangement without fittings , "providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings. this includes jointing of pipes & fittings with one step cpvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge - external work 50 mm nominal outer dia. pipes. " , "providing and fixing chlorinated polyvinyl chloride (c

Central Government/Public Sector

CTN :39588581

17 Mar, 2025 NA

Multi City - Multi State

Tender For supply of locking wedge system as per frontier drawing no. fasl/bdg/w/0835 conforming to rdso specification no. rdso/2011/cg-03 rev -01.the material should be supplied with guarantee/warranty certificate.

Locking Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector