Latest locomotive spare Tenders | Government locomotive spare Tenders

Central Government/Public Sector

CTN :44678838

06 Apr, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of set of cbc gauges one set consist of 06 gauges for checking of aar h type centre buffer coupler. gauges made of hard steel alloy or stainless steel with hardness 45-50 hrc as per attached specifications to pie make (i) contour maintenance gauge (knuckle profile gauge) gauge no.31000 (ii) aligning wing limit gauge,gauge no. 32600 (iii) contour condemning limit gauge (jaw-gap gauge), gauge no. 34100-1 (iv) knuckle nose wear and stretch limit gauge, gauge no.34100-2a (v) vertical height aligning wing pocket & guard arm gauge (go gauge-must pass), gauge no.34101-4 (vi) vertical height condemning limit aligning wing pocket & guard arm gauge (no-go gauge-must not pass), gauge no.44250-5. make: pie/ ganapathy/ escorts. note: the above demanded gauges should be supplied along with calibration certificate traceable to national standard, calibrated by nabl approved labs. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :44678328

21 Apr, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of pedestal jaw liner for casnub bogie as per g-95 (revision-1) with amendments 1 to 5 (amendment no. 5 of june 2003), fig no. 33, size: 67x30x3 mm. material: is 3885 (part 1): 1992 (reaffirmed 2001), 2nd revision, amendment no. 1 of january 2005, gr.4. as per drg.no. as per description specn: as per description [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44652869

10 Apr, 2026 1.47 Lacs

Kanpur - Uttar Pradesh

Tender For supply of jaw assembly , jaw assembly for 132kv smc make , female contract arm assembly , male contract arm assembly , ct terminal rod , terminal connector

CTN :44652516

16 Apr, 2026 1.74 Crore

Lucknow - Uttar Pradesh

Tender For supply of thunderbeat open extended jaw 9mm 20cm front actuated grip type , thunderbeat 5mm 20cm front actuated grip type s , thunderbeat 5mm 45cm front actuated grip type s , thunderbeat 5mm 35cm front actuated grip type s , thunderbeat shear 5 mm - 9 cm front actuated compatible with , transducer for thunderbeat

Central Government/Public Sector

CTN :44653130

20 Apr, 2026 NA

Jaduguda - Jharkhand

Tender For supply of 1- spacer for rrs 95, dbse 100 mm, with sw retaining ring with screw. moc- lm-24 , 2- spacer for rrs 110, dbse 100 mm, with sw retaining ring with screw. moc- lm-24 , 3- spacer for rrs 150. dbse 100 mm, with sw retaining ring with screw. moc- lm-24 , 4- spacer for rrs 225, dbse 140 mm, with sw retaining ring with screw. moc- lm-24 , 5- snap wrap radial removable flex. element for rrs 95 jaw coupling moc- pu, shore 90 plus-minus5 , 6- snap wrap radial removable flex. element for rrs 110 jaw coupling moc- pu, shore 90 plus-minus5 , 7- snap wrap radial removable flex. element for rrs 150 jaw coupling moc- pu, shore 90 plus-minus5 , 8- snap wrap radial removable flex. element for rrs 225 jaw coupling moc- pu, shore 90 plus- minus5 , 9- hub-adaptor for rrs 95 coupling for both pump and motor moc- c.i. cr. fg 200 , 10- hub-adaptor for rrs 110 coupling for both pump and motor moc- c.i. cr. fg 200 , 11- hub-adaptor for rrs 150 coupling for both pump and motor moc- c.i. cr. fg 200 , 12- hub-adaptor for rrs 225 coupling for both pump and motor moc- c.i. cr. fg 200

Central Government/Public Sector

CTN :44670951

31 Mar, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - scrap of cs and ms containing release unserviceable material of c&w qty 95.00 mt such as such hex head bolt & castel nut, door sealing bracket, door chainless cotter short, swing door bolt eye, man hole cover, vapour extractor cock, filling pipe cap, valve spindle gland, gland for 100 mm lubricated t.p. valve, locking plate, bolster inner spring, wear plate brake beam, brake beam, side frame key for ctrb, bolster spring snubber, key bolt with spring washer, side frame friction liner, top side bearer liner, height adjustment packing 37 mm, height adjustment packing 12 mm, empty tie rod, loaded tie rod, main pull rod short, control rod for btpn, knuckle thrower, shank wear plate for cbc, bearing piece assembly, safety loop, brake beam support, locking bracket, spring for bk head (wm), empty load device, end push rod, brake beam hanger (wm trolley), operating arm, brake head adjuster (wm), pin with split pin for bk beam (wm), flap door, door check spring, bolt with nut, rivets ms, split pin, bulb cotter, washer ms black dia m, m.s. channel, angle, round steel bar, ms flat, stud for locking plate, top housing for pu pad, wedge for casnub bogie, center pivot bottom, center pivot top, narrow jaw adapter, wide jaw adapter, p.u. pad, hand brake screw with nut, main pull rod assembly (slack adjuster side), knuckle ht, coupler rod, lock for cbc box, knuckle pin, yoke pin for cbc, handle for center brake rigging, roller for bogie pull rod, automatic twist lock shaft, damaged flappers of gantry, brake beam of casnub bogie, diaphragm, fasteners, brake shoe, sab parts, follower plate etc. location scrap yard krca, near new sick line office. delivery by actual weight only and as is where is basis. custodian sse c&w krca. fdp 50 days. the lot details is as per survey sheet only. delivery will be given after the full payment only

Central Government/Public Sector

CTN :44670956

31 Mar, 2026 NA

Multi City - Gujarat

Tender For corrigendum : auction sale of others - scrap of cs and ms containing release unserviceable material of c&w qty 45.00 mt such as such hex head bolt & castel nut, door sealing bracket, door chainless cotter short, swing door bolt eye, man hole cover, vapour extractor cock, filling pipe cap, valve spindle gland, gland for 100 mm lubricated t.p. valve, locking plate, bolster inner spring, wear plate brake beam, brake beam, side frame key for ctrb, bolster spring snubber, key bolt with spring washer, side frame friction liner, top side bearer liner, height adjustment packing 37 mm, height adjustment packing 12 mm, empty tie rod, loaded tie rod, main pull rod short, control rod for btpn, knuckle thrower, shank wear plate for cbc, bearing piece assembly, safety loop, brake beam support, locking bracket, spring for bk head (wm), empty load device, end push rod, brake beam hanger (wm trolley), operating arm, brake head adjuster (wm), pin with split pin for bk beam (wm), flap door, door check spring, bolt with nut, rivets ms, split pin, bulb cotter, washer ms black dia m, m.s. channel, angle, round steel bar, ms flat, stud for locking plate, top housing for pu pad, wedge for casnub bogie, center pivot bottom, center pivot top, narrow jaw adapter, wide jaw adapter, p.u. pad, hand brake screw with nut, main pull rod assembly (slack adjuster side), knuckle ht, coupler rod, lock for cbc box, knuckle pin, yoke pin for cbc, handle for center brake rigging, roller for bogie pull rod, automatic twist lock shaft, damaged flappers of gantry, brake beam of casnub bogie, diaphragm, fasteners, brake shoe, sab parts, follower plate etc. location scrap yard krca, near new sick line office. delivery by actual weight only and as is where is basis. custodian sse c&w krca. fdp 50 days. the lot details is as per survey sheet only. delivery will be given after the full payment only

CTN :44612226

15 Apr, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply of spares for brito electric two wheelers d d ? g? g - item 1 centre stand as technical specification annexure attached , item 2 centre stand spring as technical specification annexure attached , item 3 centre stand bush as technical specification annexure attached , item 4 rear shock absorber set as technical specification annexure attached , item 5 rear jaw holder plate assy as technical specification annexure attached , item 6 break shoe 110mm dia set as technical specification annexure attached , item 7 front fork t stem as technical specification annexure attached , item 8 front shock absorber rh as technical specification annexure attached , item 9 front shock absorber lh as technical specification annexure attached , item 10 front rim as technical specification annexure attached , item 11 front axle as technical specification annexure attached , item 12 front jaw holder plate assy as technical specification annexure attached , item 13 break shoe 110mm dia as technical specification annexure attached , item 14 brake lever assy lh with power cut off switch as technical specification annexure attached , item 15 brake lever assy rh with power cut off switch as technical specification annexure attached , item 16 front brake cable as technical specification annexure attached , item 17 rear brake cable as technical specification annexure attached , item 18 seat lock as technical specification annexure attached , item19 motor connector box with closing cover as technical specification annexure attached , item 20 ignition lock as technical specification annexure attached , item 21 logic flasher 12v ev as technical specification annexure attached , item 22 digital speedometer as technical specification annexure attached , item 23 digital speedometer panel as technical specification annexure attached , item 24 horn switch as ) /bid number : gem/2026/b/7369089 * /dated: 25-03-2026 & & / bid document 1 / 34 technical specification annexure attached , item 25 indicator switch as technical specification annexure attached , item 26 head lamp on off switch as technical specification annexure attached , item 27 upper slash dipper switch as technical specification annexure attached , item 28 charging socket with cover and wire as technical specification annexure attached , item 29 tail lamp assy as technical specification annexure attached , item 30 indicator lamp as technical specification annexure attached , item 31 tail light bulb 12v 10w slash 5w as technical specification annexure attached , item 32 tail light cover top side hyphen colour as technical specification annexure attached , item 33 seat lock key set as technical specification annexure attached , item 34 seat lock cable as technical specification annexure attached , item 35 head front hyphen side indicator cover hyphen colour as technical specification annexure attached , item 36 indicator front rh as technical specification annexure attached , item 37 indicator front lh as technical specification annexure attached , item 38 wind shield center hyphen colour as technical specification annexure attached , item 39 head light assy as technical specification annexure attached , item 40 head lamp holder as technical specification annexure attached , item 41 head light led bulb 12v 35 slash 35w -ev as technical specification annexure attached , item 42 side stand as technical specification annexure attached , item 43 spring for side stand as technical specification annexure attached , item 44 seat assy as technical specification annexure attached , item 45 mcb c40 240v as technical specification annexure attached

Central Government/Public Sector

CTN :44388920

06 Apr, 2026 NA

Bhilai - Chhattisgarh

Tender For corrigendum : supply and installation of cobot with parallel jaw gripper at iit bhilai

Central Government/Public Sector

CTN :44661508

20 Apr, 2026 NA

Multi City - Multi State

Tender For supply of wide jaw adapter (aar standard wide jaw class 'e') conforming to rdso spec. no. ab/rb-39-2002 (rev.4) of feb. 2018 to rdso drg no. sk-78527, alt: 10 or latest. [ warranty period: 48 months after the date of delivery ]

Locomotive Spare Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors