Latest magnet valve Tenders | Government magnet valve Tenders

Central Government/Public Sector

CTN :39664134

18 Mar, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of toh kit for rotex magnet valve model no. 3403, make rotex automation ltd. as per part no. 11zp25sb08002. each kit consists of 09 items, 11 nos. as per annexure %u2018a%u2019. (1) pisto n %u2018o%u2019 ring, part no.18 %u2013 01 no. (2) seat seal, part no.19 %u2013 01 no. (3) body %u2018o%u2019 ring, part no.20 %u2013 01 no. (4) pilot %u2018o%u2019 ring, part no.21 %u2013 02 nos. (5) plunger assembly, part no.30 %u2013 01 no. (6) guide %u2018o%u2019 ring, part no.32 %u2013 01 no. (7) piston glydring, part no.334 %u2013 01 no. (8) manifold %u2018o%u2019 ring, pa rt no.24 %u2013 02 nos. (9) coil gasket, part no.35 %u2013 01 no. as per drg.no. --------- specn: --- [ w arranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39664371

21 Mar, 2025 NA

Mumbai - Maharashtra

Tender For supply of cap assy. for magnet valve (23 mv8) for 22pc contractor to cee's drg. no. wr/ccg/el/memu/a4-005 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39664782

29 Mar, 2025 NA

Mumbai - Maharashtra

Tender For supply of set of valves for aws panel comprising of (1) main valve (dead man's valve) s1/s2 to m/s. kbil part no. 174911/110 rc qty. 01 no. (2) magnet valve mv1/mv2 to m/s. kbil part no. ii 51660/110 qty .01 no. (one set consist of 02 items one no each) [ warranty peri od: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39688166

27 Mar, 2025 NA

Ahmedabad - Gujarat

Tender For supply of spring plunger set for seitz rotex magnet valve type sr-231, nw-7, (sr 3037) or recon /rv/mv/2148/12 as per annexure consis ting of 3 items in 3 nos. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39662793

19 Mar, 2025 NA

Dahod - Gujarat

Tender For supply of magnet valve complete,type m23mv8e1, for ep contactor type 22pc bhel drg .no. 15880530003v00 cs.no.acs 1181 fig.ref.000 [ warranty period: 30 months after the date of delivery ]

State Government

CTN :39651649

03 Apr, 2025 NA

Delhi - Delhi

Tender For supply of rs spares of kbi make - oh kit for mean pressure valve mdv1 for apl make kbi , oh kit for stopcock parking acu panel for parking and isolating cock cab pneumatic for apl make kbi , oh kit for 3by2 way cock acu panel and 3 by 2 way cock panto panel for apl make kbi , oh kit for overflow valve dr8 b01.05 acu panel for apl make kbi , oh kit for pressure reducing valve b01.06 acu panel for apl make kbi , oh kit for load limit valve dbv3 e bcu for apl make kbi , oh kit for check valve g1 a07 main air compressor for apl make kbi , oh kit for check valve rv19 t b01.04 acu panel for apl make kbi , oh kit for check valve drv7 t double b01.10 for apl make kbi , oh kit for impulse valve b01.011 acu panel for apl make kbi , oh kit for filter b01.03 acu panel for apl make kbi , oh kit for air filter u03.03 panto contol panel for apl make kbi , oh kit for anti-skid valve for apli make kbi , oh kit for valve magnet for apli make kbi , oh kit for ebmv bcu panel magnet valve panto control panel magnet valve cab for apl make kbi , oh kit for stopcock ahb200 002 b01.02 b01.07 b01.08 acu panel for apl make kbi , oh kit for levelling valve under frame for aplmake kbi , safety valve rs10 make kbi , isolating cock make kbi , magnet valve wmv1zest make kbi , swivel bearing swing trolley small size apl make kbi , support roller of saloon door apl make kbi , power module pom card for dcu door rs3 make kbi , kit for analog converter aw 4.1c for c1chk make kbi , kit for mean pressure valve mdv1 make kbi , kit for anti skid valve gv 18 2 kb make kbi , kit for bcu terminal block make kbi bid number/ & ( * ) : gem/2025/b/6046686 dated/ + : 11-03-2025 bid document/ 3 3 1 / 36

Central Government/Public Sector

CTN :39356697

18 Mar, 2025 NA

Salem - Tamil Nadu

Tender For corrigendum : supply of l560178 boq - , 651021000263 8" erw m.s pipe (wall thick 5.2mm) baf 8" erw m.s pipe for baf wall thickness: 5.0 mm , 651021000264 6" erw m.s pipe (wall thick 4.8mm) baf 6" erw m.s pipe for baf wall thickness: 4.8 mm b class , 651021000265 1" seamless pipe (wall thick 4.05mm) baf 1" seamless pipe for baf wall thickness: 4.05 mm c class , 651021000266 3/4" m.s seamless pipe (thick 3.25mm) 3/4" m.s seamless pipe for baf wall thickness: 3.25mm c class , 651021000267 dn 200 class 150 rf flange (m.s) baf supply of dn 200 class 150 rf flange (m.s) for baf thick: 25mm , 651021000268 dn 100 class 150 rf flange (m.s) baf supply of dn 100 class 150 rf flange (m.s) for baf thick: 20mm , 651021000269 dn 100 class 150 rf flange (s.s 304) baf supply of dn 100 class 150 rf flange (s.s 304) for baf , 651021000270 dn 150 class 150 rf flange (m.s) baf supply of dn 150 class 150 rf flange (m.s) for baf mat against mc no: 651021000277 thick:20mm , 651021000272 female coupler 1/2" threaded (m.s) baf supply of female coupler 1/2" threaded (m.s) for baf , 651021000273 seamless tee joint 6" size (m.s) baf supply of seamless tee joint 6" size (m.s) for baf , 651021000274 seamless tee joint 8" size (m.s) baf supply of seamless tee joint 8" size (m.s) for baf , 651021000275 seamless m.s bend butt weld type 1" baf supply of seamless m.s bend butt weld type 1" size for ba , 651021000276 seamless m.s bend butt weld t??? 3/4" supply of seamless m.s bend butt weld type 3/4" size for b , 651021000277 6" gate valve class 150 flanged ends , supply of 6" (dn 150) size gate valve class 150 flanged end (cast iron body, ss gate) for baf matching against mc no: 651021000270 , 651021000278 m.s channel 100 x 50 mm for baf supply of m.s channel 100 x 50 mm for baf , 651021000279 u clamp with nut 8" size for baf supply of u clamp with nut 8" size for baf , 651021000280 u clamp with nut 6" size for baf supply of u clamp with nut 6" size for baf , 651021000281 stauff/pp clamp for pipe 3/4" for baf supply of stauff/pp clamp for pipe 3/4" size for baf , 651021000282 dn 80 gate valve class 150 flanged ends supply of dn 80 gate valve class 150 flanged ends (cast ir body, ss gate) for baf

Co-operative

CTN :39603779

21 Mar, 2025 24.83 Lacs

Bengaluru - Karnataka

Tender For supply erection testing installation of kitchen equipments for cattle feed plant at rajanukunte-, rice vessel with stand, a) vessel shall be of 16g ss of inner size 23" diax23" deep., b) stand frame structure shall be of 16g 50mm dia ss pipe., c) 18g ss lid shall be fitted with frame structure for vessel., d) 25mm diass pipe handle shall be provided for tilting the vessel., e) 16g ss perforated sheet shall be provided for vessel as a strainer., f) cross supports shall be provided on 3 sides with front open., g) 25mm dia drain outlet shall be provided for vessel., h) ss grouting plate shall be provided for grouting., i) steam inlet shall be provided on right hand side of the unit., samber vessel with stand, a) vessel shall be of 16g ss of inner size 20" diax20" deep., b) stand frame structure shall be of 16g 50mm dia ss pipe., c) 18g ss lid shall be fitted with frame structure for vessel., d) 25mm diass pipe handle shall be provided for tilting the vessel., e) 16g ss perforated sheet shall be provided for vessel as a strainer., f) cross supports shall be provided on 3 sides with front open., g) 25mm dia drain outlet shall be provided for vessel., h) ss grouting plate shall be provided for grouting., i) steam inlet shall be provided on right hand side of the unit., idli box with stand and also with idli side table with 2 under shelves (600 x 600 x 850+150) & splash back, a) 16g ss 304 quality double layered chamber., b) 3 nos. idli chamber decks of 3 trays per deck. each tray shall be 20 idlis capacity., c) 12 nos. 20g ss 304 quality idli trays with perforation., d) 12 nos ss drip trays below idli tray., e) front water collection tray for idli stand., f) 38mm dia 16swg ss 304 quality pipe uprights with 3 sides 25mm dia 16swg ss 304 quality cross supports with nylon bullet feet., g) ss door with rubber gaskets shall be provided., h) unit shall be provided with independent steam control valve., i) steam inlet shall be provided on right hand side of the unit., plate rack of five shelves, a) the verticals shall be in ss 38mm dia 16g 304 quality pipes with adjustable nylon bullet feets, b) the shelves of 18g 304 grade shall be down beeded 38mm on all sides and 12mm towards inside., c) bottom shelf shall be provided 150mm above & remaining spaced equally., two burner cooking range, a) the frame work of gas range shall be 32x32x3mm thick ss angle., b) cast iron grid of size 400x400mm shall be provided over the burner., c) 20g ss 304 quality sheet with performance shall be provided on 3 sides & removable front control panel shall be of 20g ss 304 quality steel., d) 20g ss 304 quality sheet handle with ss 22 g 304 grade spillage tray below the burner wil be provided., e) bottom cross supports shall be of 25mm dia 16swg ss 304 quality pipes., f) top shall be of 16 swg ss 304 quality sheet with the cutout to receive 1 no cast iron grid., g) vertical supports shall be of 38mm dia ss pipes 16swg 304 quality with adjustable nylon bullet feet., h) gas inlets on both sides shall be given., i) two high pressure gas burner., dosa plate, a) the frame work of gas range shall be 32x32x3m thick ss angle., b) vertical supports shall be of 50mm dia ss pipes 16swg 304 quality with adjustable nylon bullet feet., c) four side drain channel shall be given with 16swg ss 304 quality splash on 3 sides., d) one piece polished 25mm thick ms dosa plate with 2 handles on either sides of size 1200x600mm., e) 2 nos. ribbon type "v" shaped burners equally placed under the ms plate to get uniform heat., f) bottom cross supports shall be 25mm dia 16swg ss 304 quality pipes., g) suitable windows with cover shall be made in the front control panel for ignition., h) gas inlets on both sides shall be given., i) 20g ss 304 quality sheet with performance shall be provided on 3 sides & removable front control panel shall be of 20g ss 304 quality steel., j) 150mm high 16g ss 304 grade splash on length side. 304 grade pipe upright with adjustable bullet feet, f

Central Government And Public Sector

CTN :39664544

26 Mar, 2025 NA

Bhilai - Chhattisgarh

Tender For supply of magnet valve assembly for m/s. schneider elect.infr.ltd. make single bottle vcb used in emus and electrical locomotives. as per m/s. schneider elect. infr. ltd. part no. 5260000 or m/s. rotex automation model/type no.3486. [ warranty period: 30 months after the date of delivery ]

CTN :39645687

02 Apr, 2025 NA

Jabalpur - Madhya Pradesh

Tender For tender for the supply of tools of various trades for govt. industrial training institutes of madhya pradesh - name of the tools, adjustable pipe chain tongue to take pipes (up to 300 mm)adjustable pipe chain tongue should be able to take pipes up size-0 to 300 mm., adjustable pipe die set bsp cover pipe size 1" or 3/4", ag 4 cutting wheels, 4 inch, ag 4 grinding wheels 4 inch, allen key alloy steel size-1.5-10 mm (set of 9), angle plate adjustable - 150 x 175 x 250 mm, anti spatter spray can size - 100 to 300 ml, anvil 24 sq. inches working area with stand, apron leather size -14 inches, arc welding cables multi cored 1 meter, arc welding cables multi cored 1 meter, arc welding plain glass, arc welding single coloured glasses, arm strong type tool bit holder. right hand, arm strong type tool bit holder. left hand, arm strong type tool bit holder. straight, aviation snips straight cut 300 mm, bearing different types each type of diameter 25 mm (min.), bearing extractor universal gear puller 2 or 3jaws adjustable, bearing puller (inside) 200 mm, bearing puller (outside) 200 mm, bench work, bench work. 2400 x 1200 x 900 mm, blow lamp brass 0.5 liter, bolts, nuts, anchor bolts, washers, screws, other pins, lugs etc, bolt & nut with washer - m 20x 2.5x 90 long, bradawl, c-clamp 200 mm, c-clamp 100mm, c.i. sluice / gate valve (flanged type), caliper hermaphrodite spring type150 mm, caliper inside spring type size-150 mm, caliper outside spring type size-150 mm spring, caps screws m6, m8, m10, m12, carbide wear block. 1 mm - 2 mm, cast iron globe valve (flanged type) 150nb, class# 150 flange: ansi125-b16.1, centre punch -10 mm and length 120 mm, chisel cold 25 mm x 200 mm, chisel cold flat 20 mm x 150 mm, chisel cold crosscut point 9 mm x 150 mm, chisel cold flat 9 mm x 100 mm, chisel cold round nose 9 mm x 100 mm, chisel firmer with wooden handle 6 mm x 200 mm, clamp set magnetic multi angle metal base (18 x10 x 10 cm), clamp toolmaker- 5 cm and 7.5 cm set of 2., combination set 300 mm, contactor & auxiliary contacts, contactor & auxiliary contacts, copper bit soldering iron. 0.25 kg, crimping tool crimp, crimping tool -16 sq mm to 95 sq mm, cut out relays-16a, 440v, de-soldering gun, universal dial test indicator - plunger type, pipe threading die with handle, divider 150 mm spring type, divider (200 mm), dowel pin (straight), drill chuck with key 12 mm., drill drift (200 mm hardened and black finish), drill hand brace (0-100 mm), drill s.s. twist block 2 mm, 5 mm and 6 mm set of 3, drill twist straight shank 3 mm to 12 mm by 0.5 mm, drill twist taper shank 8 mm to 20 mm by 0.5 mm, earth clamp (600a), electrode holder 600 amps, wire brush 3"x5" size, brass or steel, file feather edge smooth 150 mm, file flat 200 mm 2nd cut with handle, file flat 350 mm bastard with handle, file flat - second cut 250 mm with handle, file flat bastard 250 mm with handle, file flat bastard 200 mm with handle, file flat bastard. 300 mm with handle, file flat rough 150 mm with handle, file flat second cut safe edge. 300 mm with fitted wooden handle, file flat smooth 250 mm. with fitted wooden handle, file half round 200 mm 2nd cut with fitted wooden handle, file half round bastard 300 mm with fitted wooden handle, file half round bastard. 250 mm with fitted wooden handle, file half round second cut150 mm. with fitted wooden handle, file half round second cut. 250 mm with fitted wooden handle, file hand second cut. 150 mm with fitted wooden handle, file knife edge smooth 150 mm with fitted wooden handle, file rasp, half round 200 mm bastard with fitted wooden handle, file round 200 mm 2nd cut with fitted wooden handle, file round bastard. 250 mm with fitted wooden handle, file round second cut 200 mm with fitted wooden handle, file square second cut 250 mm with fitted wooden handle, file swiss type needle set of 12 , length = 150 mm, file triangular second cut. 200 mm with fitted wooden handle, file triangular smooth 200 mm with fitted wooden

Magnet Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors